TRANSITION NETWORK S3280-S
Specifications
Data Rate
Copper ports (RJ-45): 10/100/1000 Mbps, SFP ports (empty): 100/1000 Mbps or SGMII
Dimensions
Width: 9.775” [248.23 mm], Depth: 6.5” [165 mm], Height: 1.75” [44.45 mm]
Environment
-20°C to +65°C Long term operating temperature, -40°C to +75°C Short term operating temperature, 5%– 95% humidity non-condensing, -40°C to +85°C storage temperature
Input Power
AC: 12 VDC via barrel connector using 100-240VAC, Redundant DC: 18-57VDC via terminal block
Maximum Frame Size
9,600 bytes (9.6K)
Maximum MAC Addresses
8K
Safety compliance
UL listed, CE, EN55022 Class A, EN55024
Standards
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX, IEEE 802.3z for 1000Base-X, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3ah Link OAM, IEEE 802.3ag SOAM FM, IEEE 1588-2008 (v2) Precision Time Protocol (PTP), ITU G.8261 Synchronous Ethernet, ITU Y.1731 PM
Status LEDs
Power, Port Activity and Port Duplex
Warranty
Lifetime
Features
- -40°C to 75°C operating temperature
- 1588v2
- 4 x 10/100/1000Mbps Base–T ports, 4 x 100/1000Mbps SFP ports, Any port can be network or client
- 4SNMP v1, v2c, and v3
- Fan-less design
- IPv6 and IPv4 support
- Jumbo Frame Support (9.6K)
- OAM Support: IEEE 802.3ah Link OAM, IEEE 802.3ag Service OAM and, ITU Y.1731 Performance Monitoring
- Redundant DC power (18-57VDC) via power block or AC power via barrel connector
- Ring Protection: G.8032, STP, RSTP, MSTP
- RMON and Syslog
- SyncE (S3280-S model)
- VLAN (802.1Q) with Q-in-Q (C-Tag / S-Tag)
Datasheet
Extracted Text
The ION Platform stand alone NID S3280 OAM/IP-Based Remotely managed NID (Network Interface Device) Transition Networks’ managed S3280 NID pro- Ordering Information vides advanced packet performance metering and service creation directly at customer prem- S3280 (4) 10/100/1000Mbps RJ45 ports with ises and cell sites. The S3280 is designed for (4) 100/1000Mbps SFP ports. business Ethernet and mobile backhaul deploy- Includes 1588v2 ments. S3280-S (4) 10/100/1000Mbps RJ45 ports with The S3280 is a multi-service NID that provides (4) 100/1000Mbps SFP ports. SLA-assurance and advanced fault management Includes 1588v2 & SyncE that is certified to MEF standards. It delivers IEEE Mounting Options Applications 802.1ag Service OAM, ITU Y.1731 Performance Monitoring and 802.3ah Link OAM. 4Mobile Backhaul S3280-19RM 4 SLA enforcement with 19” Rack Mount Kit for S3280 + S3280S The S3280 supports advance features such as 4Business Ethernet delivery advanced diagnostic tools IPv4/6, VLANs, QoS, bandwidth allocation, ring 4 Ethernet First Mile (EFM) 4Migration to Packet protection, jumbo frames and numerous security 4 Fiber to the Premise (FTTP) Switched Networks features. 4 4 EPL & EVPL services QoS for differentiated The S3280 can be managed via Web, CLI and Software Features services 4Enterprise markets SNMP (v1, v2c & v3). The product also supports 4E-LINE (EPL/EVPL) support SSL/SSH, RADIUS and Management VLAN. Specifications 4 UNI or NNI configuration The S3280 offers multiple power inputs for re- 4 Standards IEEE 802.3 for 10Base-T TOS/Diffserv dundancy and DC inputs for extended operating IEEE 802.3u for 100Base-TX 4 Quality of Service (802.1p): IEEE 802.3z for 1000Base-X temperature in extreme environments. 8 queues; strict priority support, IEEE 802.3ab for 1000Base-T The SFP ports are triple speed and support IEEE 802.3x for Flow control shaping, policing, P-bit and DSCP IEEE 802.3ad for LACP 100Mbps, 1000Mbps or SGMII SFPs. CWDM and 4 IGMP v2/v3 (Link Aggregation Control Protocol) Bi-Di SFPs are also supported , allowing for flex- IEEE 802.1D for STP (Spanning Tree Protocol) 4 Management via CLI, Telnet, SSH, IEEE 802.1p for COS (Class of Service) ible network architectures. SSL, SNMPv1, v2c & v3 IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) 4Port configuration, status, statistics Features IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) and monitoring IEEE 802.1x for Authentication 44 x 10/100/1000Mbps Base–T ports IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) 4 RADIUS and ACL 4 x 100/1000Mbps SFP ports IEEE 802.3ah Link OAM 4 IEEE 802.3ag SOAM FM Remote backup / restore of Any port can be network or client IEEE 1588-2008 (v2) Precision Time Protocol (PTP) configuration in human 4 SNMP v1, v2c, and v3 ITU G.8261 Synchronous Ethernet readable format 4 ITU Y.1731 PM IPv6 and IPv4 support 4Remote firmware upgrades 4VLAN (802.1Q) with Q-in-Q (C-Tag / S-Tag) Maximum MAC Addresses 8K 4RMON and Syslog 4 Alarms via Syslog & SNMP Maximum Frame Size 9,600 bytes (9.6K) 4 OAM Support: 4 Data Rate Copper ports (RJ-45): 10/100/1000 Mbps Remote loopbacks IEEE 802.3ah Link OAM. SFP ports (empty): 100/1000 Mbps or SGMII 4L2CP IEEE 802.3ag Service OAM and Status LEDs Power, Port Activity and Port Duplex 4LLDP ITU Y.1731 Performance Monitoring Dimensions Width: 9.775” [248.23 mm] 4Diagnostic Monitoring Interface Depth: 6.5” [165 mm] 4Ring Protection: Height: 1.75” [44.45 mm] – SFF-8472 G.8032 Input Power AC: 12 VDC via barrel connector using 100-240VAC 4 Dying/Last Gasp STP Redundant DC: 18-57VDC via terminal block 4Port Mirroring RSTP Environment -20°C to +65°C Long term operating temperature MSTP 4Link Aggregation Control Protocol -40°C to +75°C Short term operating temperature 5%– 95% humidity non-condensing (LACP) 41588v2 -40°C to +85°C storage temperature 4 SyncE (S3280-S model) Safety Compliance UL listed, CE, EN55022 Class A, EN55024 4 Redundant DC power (18-57VDC) via power Warranty Lifetime block or AC power via barrel connector 4Jumbo Frame Support (9.6K) 4-40°C to 75°C operating temperature * MEF Certification Pending 4 Fan-less design
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the S3280-S have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods