The ION Platform see also: ION Slide-in-Card 4xT1/E1/J1 stand-alone NID S6110 Series 4xT1/E1/J1 Ordering Information S6110-1011 1300nm multimode (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB to (4) RJ-48 [1.5 km/0.9 mi.] PBX PBX S6110-1013 1300nm multimode (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB PBX PBX to (4) RJ-48 [1.5 km/0.9 mi.] S6110-1014 PBX PBX 1310nm single mode (SC) ION Chassis [20 km/12.4 mi.] Link Budget: 16.0 dB to (4) RJ-48 [1.5 km/0.9 mi.] ION Stand-Alone S6110-1015 Router 1310nm single mode (SC) Router [40 km/24.9 mi.] Link Budget: 29.0 dB to (4) RJ-48 [1.5 km/0.9 mi.] S6110-1016 1310nm single mode (SC) The ION 4xT1/E1/J1 copper to fiber network Applications [60 km/37.3 mi.] Link Budget: 32.0 dB interface device (NID) provides a solution for 4T1/E1/J1 extension over fiber to (4) RJ-48 [1.5 km/0.9 mi.] those users that need to extend multiple T1/E1 4Mobile backhaul S6110-1017 connections over fiber. 1550nm single mode (SC) 4 Business customers [80 km/49.7 mi.] The ION 4xT1/E1/J1 supports Small Form Link Budget: 29.0 dB to (4) RJ-48 [1.5 km/0.9 mi.] Pluggable (SFP) transceivers to support a variety S6110-1035 Hardware and Performance Specifications of fiber types, distances and wavelengths to 1550nm single mode (SC) [120 km/74.6 mi.] provide maximum flexibility across a variety of Link Budget: 36.0 dB network topologies. to (4) RJ-48 [1.5 km/0.9 mi.] Standards ANSI T1.102, T1.403 and T1.408 ITU I.431, G.703,G.736, G.775 and G.823 S6110-1040 The use of Coarse Wave Division Multiplexing ETSI 300-166, 300-233 and TBR 12/13 1 SFP port (Empty) (CWDM) SFPs can be utilized to further increase to (4) RJ-48 [1.5 km/0.9 mi.] AT&T Pub 62411 the bandwidth capacity of the fiber infrastructure. S6111-1040 Switches Numerous switch settings for line coding, line build 2 SFP ports (Empty) out, loopback and AIS to (4) RJ-48 [1.5 km/0.9 mi.] The ION 4xT1/E1/J1 NID must be used in pairs. Data Rate Copper ports (RJ-48): T1(J1) = 1.544Mb/s, A typical installation will include a chassis card E1 = 2.048Mb/s Single Fiber Products installed in the ION Platform locally and a stand- SFP port(s) (empty): 100BASE-X/OC-3 Recommended use in pairs alone device installed at the remote location. S6110-1029-A1 Status LEDs Power, Port Status, Loopback and AIS 1310nm TX/1550nm RX single fiber Dimensions Width: 3.7” [94 mm] single mode (SC) [20 km/12.4 mi.] Link Budget: 19.0 dB Depth: 6.5” [165 mm] Features to (4) RJ-48 [1.5 km/0.9 mi.] Height: 1.8” [46 mm] S6110-1029-A2 44 x RJ-48 copper interfaces Input Power AC: 12 VDC via barrel connector using 100-240VAC, 1550nm TX/1310nm RX single fiber UL listed power supply single mode (SC) 1 fiber interface (fixed or SFP) [20 km/12.4 mi.] Link Budget: 19.0 dB Power Consumption 6W max for dual fiber model, 5.5W max 2 SFP ports on S6111-1040 model to (4) RJ-48 [1.5 km/0.9 mi.] for single fiber model S6110-1029-B1 4 Loopback via test set Environment -10°C to +65°C operating temperature 1310nm TX/1550nm RX single fiber 5%– 95% humidity non-condensing single mode (SC) 4Local and remote loopbacks [40 km/24.9 mi.] Link Budget: 25.0 dB -40°C to +85°C storage temperature 4LEDs for device status and troubleshooting to (4) RJ-48 [1.5 km/0.9 mi.] Safety EN55022 Class A, EN55024, CE mark S6110-1029-B2 4 Settings for line code, line build out, 1550nm TX/1310nm RX single fiber Shipping Weight 2 lbs. (0.90 kg) loopbacks and Alarm Indication Signal (AIS) single mode (SC) Warranty Lifetime [40 km/24.9 mi.] Link Budget: 25.0 dB 4 Access to complete status and configuration to (4) RJ-48 [1.5 km/0.9 mi.] on local and remote device Optional Accessories (sold separately) 4Remote firmware upgrade SFP Modules 4 Remote management Wide Input (24 - 60VDC) Power Supplies 4 Extended operating temperature SPS-2460-SA Stand-Alone Power Supply Mounting Brackets WMBL Wall Mount Bracket 4.0” [102 mm]