Industrial Power Supplies TIS Series 50 - 600 Watt (LVD) Features Switch mode power supplies for DIN-rail mounting 6 power ranges with 2, 3, 6, 12, 20 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise EMI complies with EN50081-2 and EN50082-2 Conducted EMI to EN55011 class B For system operation available with built-in functions: RED: Redundancy module for N+1 systems with true current sharing The switching power supplies of the TIS series have been particularly de- SIG: Signal module with AC-Power- signed for applications in industrial process control systems and machine fail, Power Good Signal and tools. Excellent specifications and high immunity against electrical disturbances external ON/OFF control guarantee reliable power for sensitive loads in rugged industrial environ- UDS: DC-UPS module for uninter- ments. With help of optional function modules specific requirements for sys- ruptable battery backed-up tem applications can be easily realized with a standard model. With the UDS power systems module the power supplies can be extended to a perfect DC-UPS with auto- Worldwide Safety Approvals matic battery- backup. This function is very often required in applications where a time delayed shutdown of a system is necessary. To monitor and Easy snap-on mounting on DIN-rails control the power supply a signal module can be installed. For parallel op- or chassis mounting eration with active power sharing a redundancy option is available. This 3 Year Product Warranty flexibility makes the TIS series power supplies a cost effective solution for many industrial applications. Models Ordercode Input Voltage Output Power Output Voltage Output Current (includes terminal plugs) nom. max. nom. max. TIS 50-112 115 – 240 VAC 12 VDC 3.5 A 50 W TIS 50-124 universal input 24 VDC 2.0 A TIS 75-112 12 VDC 6.0 A 115 / 230 VAC TIS 75-124 75 W 24 VDC 3.0 A selectable TIS 75-148 48 VDC 1.5 A *TIS 150-124 (P) 115 / 230 VAC 24 VDC 6.0 A 150 W *TIS 150-148 (P) selectable 48 VDC 3.0 A *TIS 300-124 (P) 24 VDC 12 A 115 / 230 VAC *TIS 300-148 (P) 300 W 48 VDC 6.0 A selectable TIS 300-172 72 VDC 4.2 A TIS 500-124-115 115 VAC 500 W 24 VDC 20 A TIS 500-124-230 230 VAC 500 W 24 VDC 20 A TIS 600-124 24 VDC 24 A TIS 600-128 115 / 230 VAC 28 VDC 22 A 600 W TIS 600-148 selectable 48 VDC 12 A TIS 600-172 72 VDC 8.5 A *If compliance to EN 61000-3-2 (PFHC – Power Factor Harmonic Current) is required, option P is available for these models http://www.tracopower.com Page 1 Industrial Power Supplies TIS Series 50-600 Watt Input Specifications Input voltage range – TIS 50 93 – 264 VAC – TIS 75,150, 300, 600 93 – 132 VAC / 187 – 264 VAC – TIS 500-124-230 187 – 264 VAC – TIS 500-124-115 93 – 132 VAC Input frequency 47 – 63 Hz Input current at full load (typ.) 115 VAC 230 VAC – TIS 50 1.2 A 0.7 A – TIS 75 1.7 A 0.9 A – TIS 150 3.0 A 1.7 A – TIS 300 5.4 A 3.3 A – TIS 500 9.5 A 5.5 A – TIS 600 10.5 A 6.4 A Recommended circuit breaker, – TIS 50 5.0 A characteristic C – TIS 75 5.0 A or fuse, slow blow typ – TIS 150 10.0 A – TIS 300 15.0 A – TIS 500 15.0 A – TIS 600 20.0 A Output Specifications Output voltage adj. range – 12 VDC models 12 – 14 VDC – 24 VDC models 24 – 28 VDC – 28 VDC models 28 – 32 VDC – 48 VDC models 48 – 52 VDC (48 – 55 VDC on request)) – 72 VDC models 60 – 76 VDC Regulation – Input variation ± 0.2 % – Load variation (10–90%) – TIS 50, TIS 75, TIS 150 ± 1.0 % – TIS 300, TIS 500, TIS 600 ± 0.3 % (± 2.0 % in parallel operation) Ripple and Noise (20MHz Bandwidth) < 50 mV pk-pk Electronic short circuit protection current limitation at 110 % typ. (constant current, automatic restart) Overvoltage protection, triggerpoint at 140 % typ. Vout nom. Hold-up time 115 VAC 230 VAC – TIS 50 ... TIS 300 min. 25 ms min. 30 ms – TIS 500 min. 20 ms min. 40 ms – TIS 600 min. 15 ms min. 25 ms All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 Industrial Power Supplies TIS Series 50-600 Watt General Specifications Temperature ranges – Operating (ambient temp.) – 25 °C…+70 °C (– 13°F...+185°F) – Derating above 50 °C (122°F) 2% / K – Storage (non operating) – 25 °C…+ 85 °C (– 13°F...+185°F) Humidity (non condensing) 95 % rel H max. Pollution degree 2 Temperature coefficient 0.02 % / K Switching frequency 80 kHz typ. (Pulswidth modulation) Efficiency – TIS 50 ... TIS 300 85 % typ. – TIS 500 90 % typ. – TIS 600 90 % typ. Isolation according to IEC/ EN 60950, UL 60950, UL 508 Reliability, calculated MTBF (MIL-HDBK-217 E) – TIS 50 /75 450000 h @ +25°C/ 420000 h @ +25°C – TIS 150 /300 420000 h @ +25°C/ 360000 h @ +25°C – TIS 500 /600 340000 h @ +25°C/ 300000 h @ +25°C Safety standards IEC/ EN 60950 (SELV, except 72 VDC models), UL/cUL 60950, UL 508, UL/cUL 1604 Safety approvals UL/cUL 60950 recognized, File E181381 (TIS 500 pending) UL/cUL 508 listed, File E210002 (tested by UL to surrounding temperature of 40°C) * UL/cUL 1604 listed, File E213613 (Class I, Division 2, Groups A, B, C and D hazardous locations) *basic models except TIS50 & TIS500 CB-Report as per IEC 60950 Electromagnetic compatibility (EMC), Emissions EN 50081-1 / EN 50081-2 – Conducted RI suppression on input EN 55011 class B, EN 55022 class B, FCC part 15, level B – Radiated RI suppression EN 55011 class A, EN 55022 class A, FCC part 15, level A – Harmonic current emissions (for -P models) EN 6100-3-2, class A Electromagnetic compatibility (EMC), Immunity EN 50082-2 – Electrostatic discharge (ESD) IEC / EN 61000-4-2 4 kV / 8 kV – Radiated RF field immunity IEC / EN 61000-4-3 10 V / m – Electrical fast transient / burst immunity IEC / EN 61000-4-4 2 kV – Surge immunity IEC / EN 61000-4-5 2 kV / 4 kV – Immunity to conducted RF disturbances IEC / EN 61000-4-6 10 V – Power frequency field immunity IEC / EN 61000-4-8 30 A / m Safety class Degree of electrical protection 1 (IEC 536) Case protection IP 20 (IEC 529) Environment – Vibration IEC 60068-2-6;1 gn, 200 sweeps, each axis – Shock IEC 60068-2-27; 15 gn, 11 ms, each axis Enclosure material Aluminium (chassis) / zinc plated steel (cover) Mounting (snap-on with selflocking spring) for 35 mm DIN-rails as per EN 50022 Connection Plugable screw terminals (plugs included) (TIS 600: screw terminal blocks) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 Industrial Power Supplies TIS Series 50-600 Watt Outline Dimensions mm (inches) Power Supplies with Redundancy Function With this option a parallel operation of up to 5 units is possible. Decoupling diodes and current share lines allow to build true N +1 redundant systems with active current sharing for all units. This function also includes an alarm relay to signal a single unit failure. This option is available for TIS 150 W, TIS 300 W and TIS 600 W models. Please note: A combination with other options is not possible. Models Ordercode Input Voltage Output Power Output Voltage Output Current (includes terminal plugs) max. nom. max. TIS 150-124 RED 115 / 230 VAC 24 VDC 6.0 A 150 W TIS 150-148 RED selectable 48 VDC 3.0 A TIS 300-124 RED 115 / 230 VAC 24 VDC 12 A 300 W TIS 300-148 RED selectable 48 VDC 6.0 A TIS 600-124 RED 115 / 230 VAC 24 VDC 24 A 600 W TIS 600-148 RED selectable 48 VDC 12 A Con1 Pin3 Con2 - Pin3/4 +Vout L AC Bus Indicator Con1 Pin2 DC -Vout N Con2 - Pin1/2 Con1 Pin1 Current I-Sense V-Sense Con3 - Pin4 Share- line Con3 - Pin3 Unit OK Con3 - Pin2 Common Con3 - Pin1 Regulator Unit OK Unit OK Specifications Raiting per relay contact 60 VDC /0.36 A max. Download detailed instruction manual for RED option: http://tracopower.com/products/tis_red_manual.pdf Specifications can be changed without notice http://www.tracopower.com Page 4 115/230VAC 24/48VDC Industrial Power Supplies TIS Series 50-600 Watt Power Supplies with Powerfail Functions These models provide 3 functions required in many process control system applications:  AC-Powerfail signal (relay contact)  Power Good signal (relay contact)  Remote ON/OFF Models Ordercode Input Voltage Output Power Output Voltage Output Current (includes terminal plugs) max. nom. max. TIS 150-124 SIG 115 / 230 VAC 24 VDC 6.0 A 150 W TIS 150-148 SIG selectable 48 VDC 3.0 A TIS 300-124 SIG 115 / 230 VAC 24 VDC 12 A 300 W TIS 300-148 SIG selectable 48 VDC 6.0 A TIS 600-124 SIG 115 / 230 VAC 24 VDC 24 A 600 W TIS 600-148 SIG selectable 48 VDC 12 A Con1 Pin3 Con2 - Pin3/4 L +Vout AC Output OK Con1 Pin2 DC N -Vout Con2 - Pin1/2 Con1 Con3 - Pin2 Pin1 + Con3 - Pin1 Remote - ON/OFF Con3 - Pin7 Common Con3 - Pin6 AC-Powerfail Mains Fail Mains OK Detection (Relay A) Con3 - Pin5 DC-OK Con3 - Pin4 Common Con3 - Pin3 DC-OK DC-OK DC-OK Detection (Relay B) Specifications Power Good signal trigger point – Models with 24 Vout > 22.8 VDC ± 0.5 V relay B closed (pin 4 – pin 3) – Models with 48 Vout > 45.6 VDC ± 1.0 V relay B closed (pin 4 – pin 3) AC-Powerfail signal Vin < 93 resp. < 187 VAC relay A closed (pin 7 – pin 6) Raiting per relay contact 60 VDC /0.36 A max. Remote ON / OFF ON: short circuit con 3 pin 1 and pin 2 OFF: open circuit con 3 pin 1 and pin 2 Download detailed instruction manual for SIG option: http://tracopower.com/products/tis_sig_manual.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 5 115/230VAC Remote 24/48VDC ON/OFF Industrial Power Supplies TIS Series 50 -600 Watt DC-UPS-System In addition to the standard power supply function, these are available via two independent relay contacts. During models include a professional battery management system normal operation the battery status is monitored by to charge and monitor an external battery. In case of a periodically loading the battery for short time. If a cell power failure the battery is switched automatically and resistance is high, there is a relay alarm available. The without any interruption to the DC-output. If mains power battery is fully protected under any operational conditions. is available again, the battery is switched off. The hold-up The power supply is short circuit protected even in battery- time is limited only by battery capacity and load. Charge backup operation, however for safety reason the battery current and voltage can be adjusted to values as required should be fused with a fast blow fuse. Battery mode can by battery type. Power fail and low battery alarm signals be activated by connection of Pin 7 and 8. Complete external battery packs (3.2 Ah or 7 Ah standard) with lead batteries and circuit breaker are available (see page 8). Models Ordercode Input Voltage Output Power Output Voltage *Output Current (includes terminal plugs) max. nom. max. 115 / 230 VAC TIS 300-124 UDS 300 W 24 VDC 12 A selectable 115 / 230 VAC TIS 600-124 UDS 600 W 24 VDC 24 A selectable *reduce max. output current by battery charging current All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 6 Industrial Power Supplies TIS Series 50-600 Watt DC-UPS-System Con3 - Pin2 Battery + V Battery Charger Con3 - Pin1 Battery - I Con1 Pin3 L +Vout AC Con2 - Pin3/4 Output OK Con1 Pin2 DC N -Vout Con2 - Pin1/2 Con1 VBat>18V Pin1 Bat ON/OFF Battery Switch Mains Fail Logic Con4 Pin8 Con4 - Pin3 AC-Powerfail Con4 - Pin2 Common Con4 - Pin1 AC-Power OK Mains Fail Con4 AC-Powerfail Pin7 Detection (Relay A) Con4 - Pin6 Battery Low / failure Con4 - Pin5 Common Con4 - Pin4 Battery OK Battery Test Low Battery (Relay B) Specifications Charging current (factory set) – TIS 300-124 UDS 1.2 A – TIS 600-124 UDS 2.4 A Adjustment range of charging current – TIS 300-124 UDS 0.15...1.5 A – TIS 600-124 UDS 0.25...2.5 A Holding current for charging battery at voltage 27.3 VDC < 50 mA Overload at short circuit during battery operation system switches off AC-Powerfail signal Vin < 93 resp. < 187 VAC relay A closed (pin 2 – pin 3) Low battery signal Battery voltage below 22 V relay B closed (pin 5 – pin 6) Raiting per relay contact 60 VDC /0.36 A max. During battery charge operation output current reduction by 1.4 x battery charge current Download detailed instruction manual for UDS option: http://tracopower.com/products/tis_uds_manual.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 7 Battery 115/230VAC ON/OFF 24VDC Industrial Power Supplies TIS Series 50-600 Watt Battery-Pack for DC-UPS Systems The Battery Pack contains high quality, maintenance free lead-acid batteries with 3.2 Ah resp. 7.0 Ah capacity. The batteries are fixed together with a re-settable electronic fuse on a solid mounting frame. Together with power supply models TIS 300-124 UDS or TIS 600-124 UDS the battery pack provides a complete and reliable DC-UPS system. Backup time is depending on load current and battery capacity. Models Ordercode Battery Voltage Battery Capacity Permissable Charge (25°C, 20h-rate) Current max. TIS 24-32 AP 24 VDC 3.2 Ah 1.2 A TIS 24-70 AP 24 VDC 7.0 Ah 2.4 A Specifications Max. charge voltage 27...27.6 VDC Temperature coefficient – 36mV /°C Temperature range – at charge operation – 15 °C...+50 °C – at load operation – 20 °C...+60 °C – Storage – 20 °C...+60 °C Average lifetime on standby operation at tA =20 °C 4...5 years Cable length 1.0 m 2 Cable diameter – TIS 24-32 AP 2.5 mm (AWG 12) 2 – TIS 24-70 AP 4.0 mm (AWG 11) Weight – TIS 24-32 AP 4.6 kg (10.1 lb) – TIS 24-70 AP 5.9 kg (13.0 lb) Recommended combinations – TIS 24-32 AP TIS 300-124 UDS (power supplies) – TIS 24-70 AP TIS 600-124 UDS All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 8 Industrial Power Supplies TIS Series 50-600 Watt Outline Dimensions mm (inches) TIS 50 TIS 75 Input Output adj adj L N + – 12 VDC 115/230 VAC 6 A 1,7/0,9 A DC-ON Industrial Input Output DC-ON Industrial Power Supply L N + Power Supply – 115/230 VAC 12 VDC Model Model 1,2/0,7 A 3,5 A TIS 75-112 TIS 50-112 5 56.7 75 (2.95) 5 56.7 (2.23) 90 (3.54) (0.2) (2.23) (0.2) 45 (1.77) 37.5 (1.48) Weight: TIS 50 0.41 kg (0.9 lb) TIS 75 0.48 kg (1.06 lb) TIS 150 Output + – 24 VDC / 6 A DC-ON Industrial Power Supply Model Input TIS 150-124 115/230 50/60Hz 3,7/1,7 A N L (2.23) 157 (6.18) 5 56.7 (0.2) 38.5 80 (3.15) Weight: (1.52) TIS 150 0.80 kg (1.76 lb) Tolerances: ±0.5 mm (±0.02) Specifications can be changed without notice http://www.tracopower.com Page 9 114.6 (4.51) 100.0 (3.94) 10 74.0 26 (2.91) (1.02) (0.39) 31.5 (1.24) 10 86.5 (3.4) 34 (1.34) (0.39) 39.5 (1.56) 114.6 (4.51) 10 86.5 34 (3.4) (1.34) (0.39) 39.5 (1.56) Industrial Power Supplies TIS Series 50-600 Watt Outline Dimensions mm (inches) TIS 300 Output + + – – DC-ON 72 VDC / 4 A Industrial Power Supply Model TIS300-172 Input 115/230 50/60Hz 5,4/3,3 A N L 207 (8.15) 83 (3.27) 5 (0.2) 38.5 130 (5.12) (1.52) Weight: TIS 300 1.4 kg (3.09 lb) TIS 500 Industrial DC-ON Power Supply Model TIS 500-124-230 Input Output 230 VAC 50/60Hz 5,3 A 24 VDC / 20 A L + + – – N 220 (8.66) 5 83 (3.27) (0.2) 130 (5.12) 46 (1.81) Weight: TIS 500 1.9 kg (4.19 lb) Specifications can be changed without notice Tolerances: ±0.5 mm (±0.02) http://www.tracopower.com Page 10 130 (5.12) 114.6 (4.51) 83 (3.27) 10 10 91.5 (3.6) 34 (1.34) (0.39) (0.39) 94 41.5(1.63) (3.7) 34.5 39.5 (1.36) (1.56) 47 (1.85) Industrial Power Supplies TIS Series 75-600 Watt Outline Dimensions mm (inches) TIS 600 Input Output + + N L – – 115/230 VAC 50/60Hz 24 VDC / 20 A 10,5/6,4 A Industrial Power Supply Model TIS 600-124 243 (9.57) 82.6 (3.25) 179 (7.05) 32 (1.26) Weight: TIS 600 2.0 kg (4.41 lb) Specifications can be changed without notice Tolerances: ±0.5 mm (±0.02) http://www.tracopower.com Page 11 82.8 (3.26) 177.2 (6.98) 6.8 120.2 (4.73) (0.27) Industrial Power Supplies TIS Series 50-600 Watt Outline Dimensions mm (inches) Optional Mounting Systems Dimensions mm (inches) Wall mounting A B 7.5 (0.30) C 4.6 (0.18) Models Order code A B C D E TIS 75W MK-75 37 (1.46) 14.5 (0.57) – 134.5 (5.30) 150.5 (5.93) TIS 150W MK-150 132 (5.20) 13.5 (0.53) 105 (4.13) 134.5 (5.30) 150.5 (5.93) TIS 300W MK-300 132 (5.20) 13.5 (0.53) 105 (4.13) 134.5 (5.30) 150.5 (5.93) TIS 500W MK-500 132 (5.20) 13.5 (0.53) 105 (4.13) 134.5 (5.30) 150.5 (5.93) TIS 600W MK-600 190 (7.48) 37.5 (1.48) 115 (4.53) 197.0 (7.76) 207.0 (8.15) Rugged DIN-Rail mounting A B C countersink M4 Models Order code A B C TIS 150W RMK-150 150 (5.91) 115 (4.53) 35 (1.38) TIS 300W RMK-300 200 (7.87) 165 (6.50) 35 (1.38) TIS 500W RMK-300 200 (7.87) 165 (6.50) 35 (1.38) TIS 600W standard 180 (7.09) 165 (6.50) 15.0 (0.59) Specifications can be changed without notice Tolerances: ±0.5 mm (±0.02) http://www.tracopower.com Page 12 50.1 (1.97) D E 4.2 (0.17) 25 (0.98) Industrial Power Supplies TIS Series 50-600 Watt Outline Dimensions mm (inches) 204 (8.03) TIS-24-32 AP 14 184 (7.24) (0.55) Detail A 7 (0.28) A A 7 B B Detail B (0.28) Weight (incl. batteries): TIS-24-32 AP 4.6 kg (10.1 lb) TIS-24-70 AP 5.9 kg (13.0 lb) 272 (10.71) TIS-24-70 AP 252 (9.92) A A B B Specifications can be changed without notice Tolerances: ±0.5 mm (±0.02) Rev. 01/04 Jenatschstrasse 1  CH-8002 Zurich  Switzerland Tel. +41-1284 2911  Fax +41-1201 1168  e-mail: sales traco.ch  internet: http://www.tracopower.com Page 13 @ (0.23) 100 (3.94) 69 (2.72) 135 (5.14) 100 (3.94) 69 (2.72) 152 (5.98) 9 5.8 (0.35) 12 (0.47)