TRACO POWER TEN25-2412WI
Specifications
Efficiency
89% Typical
Input Voltage Range
10 - 40VDC
Output Current
2,500mA max
Output Voltage
12VDC
Features
- Adjustable output voltage
- Continuous short circuit protection
- Fully RoHS compliant
- I/O isolation 1500 VDC
- Input filter meets EN 55022, class A and FCC, level A without external components
- Over temperature protection
- Over voltage protection
- Remote On/Off
- Ultra wide 4:1 input voltage range
Datasheet
Extracted Text
DC/DC Converters TEN 25WI Series, 25/30 Watt Features UL 60950-1 ◆ Ultra wide 4:1 input voltage range ◆ Adjustable output voltage ◆ Remote On/Off ◆ Continuous short circuit protection ◆ Over voltage protection ◆ Over temperature protection ◆ I/O isolation 1500 VDC ◆ Input filter meets EN 55022, class A and FCC, level A without external components ◆ Fully RoHS compliant ◆ 3-year product warranty The TEN 25WI series is a family of high performance dc-dc converter modules up to 30 Watt featuring ultra wide 4:1 input voltage ranges in a compact low profile case with industry standard footprint. Standard features include remote On/Off, output voltage trimming, over voltage protection, under voltage lockout, over temperature and short circuit protection. An other features is the internal EMI-filter to meet EN 55022, class A. Typical ap- plications for these converter modules are industrial electronics, communication sys- tems, battery operated equipment and distributed power systems. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 25-2410WI 3.3 VDC 5’500 mA 82 % TEN 25-2411WI 5 VDC 5‘000 mA 85 % TEN 25-2412WI 10 – 40 VDC 12 VDC 2‘500 mA 89 % TEN 25-2413WI (24 VDC nominal) 15 VDC 2‘000 mA 89 % TEN 25-2422WI ±12 VDC ±1‘250 mA 89 % TEN 25-2423WI ±15 VDC ±1‘000 mA 89 % TEN 25-4810WI 3,3 VDC 5’500 mA 82 % TEN 25-4811WI 5 VDC 5‘000 mA 85 % TEN 25-4812WI 18 – 75 VDC 12 VDC 2‘500 mA 89 % (48 VDC nominal) TEN 25-4813WI 15 VDC 2‘000 mA 89 % TEN 25-4822WI ±12 VDC ±1‘250 mA 89 % TEN 25-4823WI ±15 VDC ±1‘000 mA 89 % http://www.tracopower.com Page 1 of 4 DC/DC Converters TEN 25WI Series, 25/30W Input Specifications Input current no load 24 V models: 20 mA max. 48 V models: 10 mA max. Input current full load 24 V; 3.3 VDC models: 920 mA typ. 24 V; 5.0 VDC models: 1220 mA typ. 24 V; other output models: 1400 mA typ. 48 V; 3.3 VDC models: 460 mA typ. 48 V; 5.0 VDC models: 610 mA typ. 48 V; other output models: 700 mA typ. Surge voltage (100 msec. max.) 24 V models: 50 V max. 48 V models: 100 V max. Reverse polarity 2 A max. Reflected input ripple current 24 V models: 50 mA typ. 48 V models: 25 mA typ. Conducted noise (input) EN 55022 level A, FCC part 15, level A Start-up voltage / under voltage shut down 24 V models: 9.7 VDC / 9.3 VDC typ. 48 V models: 17.5 VDC / 16.5 VDC typ. Output Specifications Voltage set accuracy ±1 % Output voltage adj. range ±10 % with external resistor (see page 4) Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 10 – 100 % single output models: 1.0 % max. dual output models balanced load: 2.0 % max. Minimum load 10 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Temperature coefficient ±0.02 %/°C max. Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max. Transient response (25 % load step change) 150 µs typ. Output current limitation >120 % of Iout max. Short circuit protection indefinite, automatic recovery Thermal shutdown at 115°C typ. Capacitive load 3.3 & 5 VDC models: 10’000 µF 12 &15 VDC models: 1’000 µF dual output models: 330 µF General Specifications Temperature ranges – Operating –40°C to +85°C (with derating) – Case temperature +105°C max. – Storage –50°C to +125°C Load derating – without heatsink 2 %/K above 55°C – with heatsink 2.5 %/K above 65°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >550’000 h Isolation voltage (60 sec.) – Input/Output 1‘500 VDC Isolation capacitance – Input/Output (100 kHz, 1 V) 1200 pF typ. Isolation resistance – Input/Output (500 VDC) >1’000 MOhm Switching frequency (fixed) 330 kHz typ. (puls width modulation) http://www.tracopower.com Page 2 of 4 DC/DC Converters TEN 25WI Series, 25/30W General Specifications Remote On/Off: – On: 2.5 to 100 VDC or open circuit. – Off: –1.0 to +1.0 VDC or short circuit pin 3 and 2 – Standby current: 5 mA max. Safety standards UL/cUL 60950-1, IEC/EN 60950-1 Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913 Physical Specifications Casing material copper, nickel plated Baseplate non conductive FR4 Potting material silicon (UL 94 V-0 rated) Weight 48 g (1.69oz) Soldering temperature max. 265°C / 10 sec. Environmental compliance – Reach www.tracopower.com/products/ten25wi-reach.pdf – RoHS RoHS directive 2002/95/EC Output Voltage Adjustments Trim down Trim up +Vout +Vout Trim Rx Rx 10K Trim Trim –Vout Pot. Vo = adjusted output voltage [VDC] 36.667 x Vo -- 33 x Vn 33 x Vn -- 30 x Vo Vn = nominal output voltage [VDC] Rx = Rx = Rx = trim resistor [Kohm] Vn -- Vo Vo -- Vn –Vout Nominal output voltage at open Trim input. Application note: www.tracopower.com/products/ten25wi-application.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise sta- ted. http://www.tracopower.com Page 3 of 4 DC/DC Converters TEN 25WI Series, 25/30W Outline Dimensions Pin-Out Pin Single Dual 7 3 1 +Vin (Vcc) +Vin (Vcc) 6 Bottom 2 2 –Vin (GND) –Vin (GND) view 1 3 Remote On/Off 5 4 No pin + Vout 4 5 + Vout Common 6 –Vout –Vout 45.72 2.5 (1.8) (0.1) 7 Trim 6 9.3 50.8 (0.24) (0.37) (2.0) Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.02 ±0.002) Pin pitch tolerances: ±0.35 (±0.014) Case tolerances: ±0.5 (±0.02) Heat-sink TEN-HS5 (optional) Order code: TEN-HS5 56.0 (2.2) max. (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Heat-sink Thermal pad Finish: Anodic treatment (black) Clamp Weight: 19 g (0.67oz) (without converter) Converter 16.3 (0.64) max. Note: The product label on converter has to be re- moved before mounting the heat-sink. For volume orders converters will be supplied with heat-sinks already mounted. Please con- tact factory for quotation. Separate heat-sinks are only available for prototypes and small quantity orders. Specifications can be changed any time without notice. Rev. 07/12 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com Page 4 of 4 40.6 (1.6) 5.1 10.16 10.16 10.16 (0.2) (0.4) (0.4) (0.4) 23.0 (0.9) 5.08 10.16 (0.2) (0.4) 12.7 (0.5)
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the TEN25-2412WI have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Manufacturers



What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods