DC/DC Converter TEN 30WI Series 30 Watt Features pending Ultra wide 4 : 1 Input Range High Power Density Indefinite Short-Circuit Protection I/O-Isolation 1500 VDC Input Filter meets EN 55022, Class A and FCC, Level A without external Components Remote on/off Adjustable Output Industry Standard Pinout Shielded Metal Case with insulated Baseplate 3 Year Product Warranty The TEN 30WI is a new high efficiency isolated 30 Watt converter series with industry standard footprint. They feature a very wide input voltage ranges of 10 – 40 VDC and 18 – 75 VDC. Overload and overvoltage protection as well as remote of/off are included as standard. Built-in filters for both input and output minimizes the need of external filtering. The TEN 30WI series is targeted specially at mobile systems, telecommu- nication, industrial and distributed power applications where a 4:1 input voltage range is required. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 30-2408WI 1.8VDC 8‘000 mA 80 % TEN 30-2409WI 2.5VDC 8’000 mA 85 % TEN 30-2410WI 3.3VDC 6’000 mA 87 % TEN 30-2411WI 5 VDC 6‘000 mA 87 % 10 – 40 VDC TEN 30-2412WI 12 VDC 2’500 mA 87 % TEN 30-2413WI 15 VDC 2’000 mA 88 % TEN 30-2422WI ±12 VDC ±1’250 mA 85 % TEN 30-2423WI ±15 VDC ±1’000 mA 86 % TEN 30-4808WI 1.8VDC 8‘000 mA 81 % TEN 30-4809WI 2.5VDC 8’000 mA 86 % TEN 30-4810WI 3.3VDC 6’000 mA 87 % TEN 30-4811WI 5 VDC 6‘000 mA 88 % 18 – 75 VDC TEN 30-4812WI 12 VDC 2’500 mA 87 % TEN 30-4813WI 15 VDC 2’000 mA 88 % TEN 30-4822WI ±12 VDC ±1’250 mA 86 % TEN 30-4823WI ±15 VDC ±1’000 mA 87 % www.tracopower.com Page 1 New Dual Output Models DC/DC Converter TEN 30WI Series 30 Watt Input Specifications Input current (no load) 24 Vin: 1.8 Vout models: 45 mA typ. 2.5/3.3 Vout models: 60 mA typ. other models: 80 mA typ. 48 Vin: 1.8 Vout models: 25 mA typ. 2.5/3.3 Vout models: 40 mA typ. other models: 55 mA typ. Input current (full load) 24 Vin: 1.8 Vout models: 760 mA typ. 2.5/3.3 Vout models: 1000 mA typ. other models: 1500 mA typ. 48 Vin: 1.8 Vout models: 390 mA typ. 2.5 / 3.3 Vout models: 500 mA typ. other models: 750 mA typ. Surge voltage 24 Vin models: 50 V max.. (100 msec. max.) 48 Vin models: 100 V max. Start up time (nominal Vin and constant resistor load) 10 ms Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ± 1 % Output voltage adjustment ± 10 % Regulation – Input variation Vin min. to Vin max. ± 0.5 % max. – Load variation 10 – 100%: – single output models ± 0.5 % max. – dual output models balanced- / unbalanced load ± 1.0 % max. / ± 3.0 % max. Ripple and noise (20 MHz Bandwidth): 75 mVpk-pk max. Temperature coefficient ± 0.02 % / °C Output current limitation 150% of Iout max., foldback Short circuit protection Indefinite (automatic recovery) Over voltage protection 1.8/2.5 Vout models: 3.0/3.6 V 3.3/5.0 Vout models: 3.9/6.2 V 12/15 Vout models: 15/18 V Capacitive load 1.8/2.5 Vout models: 65’000 µF max. / 33’000 µF max. 3.3/5.0 Vout models: 19’500 µF max./ 10’200 µF max. 12/15 Vout models: 3’300 µF max. / 1’100 µF max. ±12/±15 Vout models: ±1’000 µF max. / ±680 µF max. General Specifications Temperature ranges – Operating – 40 °C ... + 70°C – Case temperature + 100 °C max. – Storage – 55 °C ... + 105 °C Derating 3.3%/°C above 70°C Over temperature protection typ. 115°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 E) > 350’000 h @ + 25°C All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TEN 30WI Series 30 Watt General Specifications Isolation voltage – Input/Output 1‘500 VDC Isolation capacity – Input/Output 1000 pF max. Isolation resistance – Input/Output (500 VDC) > 1‘000 M Ohm Switching frequency (fixed) 300 kHz typ. (Pulse width modulation PWM) Remote on/off ON: 3.5 ... 12 VDC or open circuit. OFF: 0 ... 1.2 VDC or short circuit pin 3 and pin 2 OFF idle current: 3 mA typ. Vibration 10-55Hz, 2G, 30 minutes along X,Y,Z Safety standards UL 60950, EN 60950, IEC 60950 Compliance up to 60 VDC input voltage(SELV limit) Safety approvals UL /cUL File pending Physical Specifications Case material Copper nickel plated Baseplate Plastic none conductive Potting material Epoxy (UL 94V-0 -rated) Weight 48 g (1.69 oz) Soldering temperature max. 250 °C / 10 sec. Output Voltage Adjustment (only for single output models) Trim up Trim down Trim +Vout (pin 7) (pin 5) Ru Rd - Vout Trim (pin 6) (pin 7) Rd [kohm]* Ru [kohm]* output 1.8V 2.5V 3.3V 5V 12V 15V output 1.8V 2.5V 3.3V 5V 12V 15V +5% 1.5 4.7 6.8 4.7 56 47 –5% 1.8 6.8 8.2 5.6 47 56 +10% 0.056 0.33 0.68 0.68 6.8 2.2 –10% 0.1 0.68 0.68 0.56 2.7 1.8 * approximate values All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 3 DC/DC Converter TEN 30WI Series 30 Watt Outline Dimensions mm (inches) 7 3 6 Bottom 2 1 view 5 4 45.72 (1.8) 5.6 10.2 Pin pitch tolerance ±0.35 (0.014) (0.22) (0.4) other tolerances ±0.5 (0.02) 50.8 (2.0) Pin diameter ø 1.0 ±0.05 (0.039 ±0.002) Pin-Out Pin Single output Dual output 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 Remote on/off Remote on/off 4 No pin +Vout 5 +Vout Common 6 –Vout –Vout 7 Trim No con. Specifications can be changed without notice Rev. 07/04 Jenatschstrasse 1  CH-8002 Zurich  Switzerland Tel. +41-1284 2911  Fax +41-1201 1168  e mail: sales traco.ch  internet: http://www.tracopower.com Page 4 - @ 40.6 (1.6) 10.16 10.16 10.16 5.1 (0.2) (0.4) (0.4) (0.4) 10.16 5.08 (0.2) (0.4) 12.7 (0.5)