Elite.Parts

Description

Traco Power TEL2-2410 TEL 2 Series, 2 Watt DC/DC Converter 3.3 VDC 18 – 36 VDC (nominal 24 VDC)

Part Number

TEL2-2410

Price

Request Quote

Manufacturer

TRACO POWER

Lead Time

Request Quote

Category

PRODUCTS - T

Specifications

Casing material

Non conductive FR4

Conducted noise (input)

EN 55022 level A, FCC part 15, level A

Humidity (non condensing)

95 % rel. H max.

Input current at full load / full load

5 Vin models: 600 mA / 40 mA typ. | 12 Vin models: 220 mA / 20 mA typ. | 24 Vin models: 110 mA / 10 mA typ. | 48 Vin models: 55 mA / 8 mA typ.

Input variation Vin min. to Vin max.

0.5 % max.

Isolation capacity - Input/Output

250 pF max.

Isolation resistance - Input/Output (500 VDC)

>1‘000 M Ohm

Isolation voltage - Input/Output (60 sec.)

1’500 VDC

Load variation 25 – 100 %

Single output models: 0.75 % max. | Dual output models: 2.0 % (balanced load)

Potting material

Epoxy, UL94V-0 - rated

Reliability, calculated MTBF - (MIL-HDBK-217F, @ +25°C, ground benign)

>1.2 Mio h

Reverse voltage protection

1.0 A max.

Ripple and noise (20 MHz Bandwidth)

50 mVpk-pk max

Short Circuit Protection

Indefinite, automatic recovery

Soldering temperature

Max. 265°C / 10 sec.

Start-up voltage / under voltage shut down

5 Vin models: 4 VDC / 3.5 VDC typ. | 12 Vin models: 7 VDC / 6.5 VDC typ. | 24 Vin models: 12 VDC / 11 VDC typ. | 48 Vin models: 24 VDC / 22 VDC typ.

Surge voltage (100 msec. max.)

5 Vin models: 11 V max. | 12 Vin models: 25 V max. | 24 Vin models: 50 V max. | 48 Vin models: 100 V max.

Temperature Coefficient

±0.02 %/K

Temperature Ranges

Operating –40°C to +75°C (no derating) | Storage –55°C to +125°C

Voltage set accuracy

±2 % max.

Weight

5.1 g (0.17oz)

Features

I/O isolation 1500V
Indefinite shortcircuit protection
Input filter meets EN55022, class A without ext. components
Lead free design, RoHS compliant
Low ripple and noise
Operating temperature range –40°C to +75°C
Regulated output
Ultracompact DIP-16 plastic package
Wide 2:1 input range

Datasheet

Traco-Power-TEL-2-datasheet1-1459292926.pdf

121 KiB

Download

Extracted Text

DC/DC Converters TEL 2 Series, 2 Watt CB Features Scheme UL 60950-1 ◆ Ultracompact DIP-16 plastic package ◆ Wide 2:1 input range ◆ Regulated output ◆ I/O isolation 1500V ◆ Input filter meets EN55022, class A without ext. components ◆ Low ripple and noise ◆ Indefinite shortcircuit protection ◆ Operating temperature range The TEL-2 series, comprising 28 models, is a range of isolated 2 Watt converters in 2 –40°C to +75°C a low profile DIP-16 package. Requiring only 3.25 cm of space on the PCB they ◆ Lead free design, RoHS compliant provide a complete DC/DC converter without need of any external components. Wide input range and tightly regulated output voltage qualifies these converters for ◆ 3-year product warranty many cost critical applications in industrial and consumer electronics. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEL 2-0510 3.3 VDC 500 mA 70 % TEL 2-0511 5 VDC 400 mA 73 % TEL 2-0512 12 VDC 165 mA 75 % 4.5 – 9 VDC TEL 2-0513 15 VDC 135 mA 73 % (nominal 5 VDC) TEL 2-0521 ±5 VDC ±200 mA 64 % TEL 2-0522 ±2 VDC ±85 mA 69 % TEL 2-0523 ±15 VDC ±65 mA 71 % TEL 2-1210 3.3 VDC 500 mA 73 % TEL 2-1211 5 VDC 400 mA 77 % TEL 2-1212 12 VDC 165 mA 80 % 9 – 18 VDC TEL 2-1213 15 VDC 135 mA 80 % (nominal 12 VDC) TEL 2-1221 ±5 VDC ±200 mA 73 % TEL 2-1222 ±12 VDC ±85 mA 78 % TEL 2-1223 ±15 VDC ±65 mA 78 % TEL 2-2410 3.3 VDC 500 mA 72 % TEL 2-2411 5 VDC 400 mA 77 % TEL 2-2412 12 VDC 165 mA 80 % 18 – 36 VDC TEL 2-2413 15 VDC 135 mA 81 % (nominal 24 VDC) ±5 VDC ±200 mA 74 % TEL 2-2421 TEL 2-2422 ±12 VDC ±85 mA 78 % TEL 2-2423 ±15 VDC ±65 mA 80 % TEL 2-4810 3.3 VDC 500 mA 71 % TEL 2-4811 5 VDC 400 mA 73 % TEL 2-4812 12 VDC 165 mA 79 % 36 – 75 VDC TEL 2-4813 15 VDC 135 mA 79 % (nominal 48 VDC) TEL 2-4821 ±5 VDC ±200 mA 71 % TEL 2-4822 ±12 VDC ±85 mA 77 % TEL 2-4823 ±15 VDC ±65 mA 77 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TEL 2 Series 2 Watt Input Specifications Input current at full load / full load 5 Vin models: 600 mA / 40 mA typ. (nominal input) 12 Vin models: 220 mA / 20 mA typ. 24 Vin models: 110 mA / 10 mA typ. 48 Vin models: 55 mA / 8 mA typ. Start-up voltage / 5 Vin models: 4 VDC / 3.5 VDC typ. under voltage shut down 12 Vin models. 7 VDC / 6.5 VDC typ. 24 Vin models: 12 VDC / 11 VDC typ. under voltage shut down 48 Vin models. 24 VDC / 22 VDC typ. Surge voltage (100 msec. max.) 5 Vin models: 11 V max. 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reverse voltage protection 1.0 A max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ±2 % max. Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 25 – 100 % single output models: 0.75 % max. dual output models: 2.0 % (balanced load) Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max Temperature coefficient ±0.02 %/K Short circuit protection indefinite, automatic recovery Minimum load 25 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Capacitive load 3.3 VDC output models: 2’200 µF max. 5 VDC output models: 1’000 µF max. 12 VDC output models: 170 µF max. 15 VDC output models: 110 µF max. ±5 VDC output models: 470 µF max. ±12 VDC output models: 100 µF max. ±15 VDC output models: 47 µF max. General Specifications Temperature ranges – Operating –40°C to +75°C (no derating) – Storage –55°C to +125°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F, @ +25°C, ground benign) >1.2 Mio h Isolation voltage Input/Output (60 sec.) 1’500 VDC Isolation capacity Input/Output 250 pF max. Isolation resistance Input/Output (500 VDC) >1‘000 M Ohm Switching frequency 300 kHz (PFM) Safety standards UL/cUL 60950-1 , IEC/EN 60950-1 Safety approval CSA 60950-1-03 (File no. 226037) www.tracopower.com/products/tel2-csa.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEL 2 Series 2 Watt Physical Specifications Casing material non conductive FR4 Potting material epoxy, UL94V-0 - rated Weight 5.1 g (0.17oz) Soldering temperature max. 265°C / 10 sec. Outline Dimensions mm (inches) 23.8 (0.94) Pin-Out Pin Single Dual 1 –Vin (GND) –Vin (GND) 1 7 8 7 No con. No con. 8 No con. Common Bottom view 9 +Vout +Vout 16 10 9 10 –Vout –Vout 16 +Vin +Vin 3.0 15.24 (0.6) 2.54 (0.12) (0.1) Pin diameter ø 0.5 ±0.05 (0.02) ±0.002 23.8 (0.94) Tolerances ±0.25 (±0.01) Specifications can be changed any time without notice. Rev. 12/09 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com Page 3 of 3 0.5 (0.02) 1.77 10.16 (0.4) (0.07) 3.2 13.7 (0.54) 7.62 (0.13) (0.3)

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products