TEL15-4810 - TRACO POWER

Description

Traco Power TEL15-4810 TEL 15 Series, 15 Watt DC/DC Converters, 36 – 75 VDC (nominal 48 VDC) 3.3 VDC

Part Number

TEL15-4810

Price

Request Quote

Manufacturer

TRACO POWER

Lead Time

Request Quote

Category

PRODUCTS - T

Specifications

Humidity (non condensing)

95 % rel H max.

Input current no load

12 Vin models: 30 mA typ. | 24 Vin models: 20 mA typ. | 48 Vin models: 10 mA typ.

Isolation capacitance – Input/Output

1200 pF typ.

Isolation resistance – Input/Output (500 VDC)

>1000 M Ohm

Isolation voltage (60 sec.) – Input/Output

1500 VDC

Output current limitation

>120 % of Iout max., constant current

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)

>700’000 h

Ripple and noise (20 MHz Bandwidth)

Single output models: 50 mVpk-pk max. | Dual output models: 75 mVpk-pk max

Short Circuit Protection

indefinite (automatic recovery)

Switching frequency (fixed)

330 kHz typ. (Pulse width modulation PWM)

Temperature Coefficient

±0.02 %/K

Temperature Ranges

Operating: –40°C to +71°C (without load derating) | Case temperature: +100°C max. | Storage: –55°C to +125°C

Features

Cost optimized design
High efficiency up to 86 %
I/O isolation 1500 VDC
Indefinite short-circuit protection
Industry standard pinout
Lead free design, RoHS compliant
Operating temperature range –40°C to +71°C

Datasheet

Traco-Power-TEL-Series-datasheet1-1711426662.pdf

172 KiB

Download

Extracted Text

DC/DC Converters TEL 15 Series, 15 Watt CB Scheme UL 60950-1 Features ◆ High efficiency up to 86 % ◆ Operating temperature range –40°C to +71°C ◆ Indefinite short-circuit protection ◆ I/O isolation 1500 VDC ◆ Industry standard pinout ◆ Cost optimized design ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The TEL 15 series is a range of DC/DC-converter modules with wide input range of 2:1. State of the art SMD-technology guarantees a product with very high reliability and good cost /performance ratio. High efficiency allows an operating temperature range of –40°C to +71°C at full load. This product serie provides an economical solution for many cost critical applications in industrial and consumer electronics. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEL 15-1210 3.3 VDC 3‘000 mA 78 % TEL 15-1211 5.1 VDC 3‘000 mA 81 % TEL 15-1212 9 – 18 VDC 12 VDC 1’250 mA 86 % (nominal 12 VDC) TEL 15-1213 15 VDC 1’000 mA 86 % TEL 15-1222 ±12 VDC ±625 mA 86 % ±15 VDC ±500 mA 86 % TEL 15-1223 TEL 15-2410 3.3 VDC 3‘000 mA 78 % TEL 15-2411 5.1 VDC 3‘000 mA 81 % TEL 15-2412 18 – 36 VDC 12 VDC 1’250 mA 86 % (nominal 24 VDC) TEL 15-2413 15 VDC 1’000 mA 86 % TEL 15-2422 ±12 VDC ±625 mA 86 % TEL 15-2423 ±15 VDC ±500 mA 86 % TEL 15-4810 3.3 VDC 3‘000 mA 78 % 5.1 VDC 3‘000 mA 81 % TEL 15-4811 TEL 15-4812 36 – 75 VDC 12 VDC 1’250 mA 86 % (nominal 48 VDC) TEL 15-4813 15 VDC 1’000 mA 86 % TEL 15-4822 ±12 VDC ±625 mA 86 % TEL 15-4823 ±15 VDC ±500 mA 86 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TEL 15 Series 15 Watt Input Specifications Input current no load 12 Vin models: 30 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. Input current (full load) 12 Vin; 3.3 Vout models: 1050 mA typ. 12 Vin; other output models: 1500 mA typ. 24 Vin; 3.3 Vout models: 550 mA typ. 24 Vin; other output models: 750 mA typ. 48 Vin; 3.3 Vout models: 250 mA typ. 48 Vin; other output models: 350 mA typ. Start-up voltage / under voltage shut down 12 Vin models: 8.5 VDC / 8.0 VDC typ. 24 Vin models: 17 VDC / 15 VDC typ. 48 Vin models: 33 VDC / 29 VDC typ. Surge voltage 12 Vin models: 25 V max. (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 1 % max. – Load variation 10 – 100 % single output models: 0.5 % max. dual output models balanced load: 1 % max. dual output models unbalanced load: 3 % max. Ripple and noise (20 MHz Bandwidth) single output models: 50 mVpk-pk max. dual output models: 75 mVpk-pk max Temperature coefficient ±0.02 %/K Output current limitation >120 % of Iout max., constant current Short circuit protection indefinite (automatic recovery) Capacitive load single output models: 470 µF max. dual output models: 220 µF max. (per output) General Specifications Temperature ranges – Operating –40°C to +71°C (without load derating) – Case temperature +100°C max. – Storage –55°C to +125°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >700’000 h Isolation voltage (60 sec.) – Input/Output 1500 VDC Isolation capacitance – Input/Output 1200 pF typ. Isolation resistance – Input/Output (500 VDC) >1000 M Ohm Switching frequency (fixed) 330 kHz typ. (Pulse width modulation PWM) Safety standards UL/cUL 60950-1, IEC/EN 60950-1 (Compliance up to 60 VDC input voltage (SELV limit) Safety approval CSA 60950-1-03 (File no. 226037) www.tracopower.com/products/tel15-csa.pdf Environmental compliance – Reach www.tracopower.com/products/tel15-reach.pdf – RoHS RoHS directive 2002/95/EC All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEL 15 Series 15 Watt Physical Specifications Casing material copper nickel plated Baseplate non conductive FR4 Potting material epoxy (UL 94V-0 rated) Weight 32 g (1.13 oz) Soldering temperature max. 265°C / 10 sec. Outline Dimensions 50.8 (2.0) 1 5.2 20.32 Pin-Out (0.6) (0.8) Pin Single Dual 3 1 +Vin (Vcc) +Vin (Vcc) Bottom View 2 –Vin (GND) –Vin (GND) 1 4 3 +Vout +Vout 2 4 No pin Common 5 5 –Vout –Vout Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.02 ±0.002) Pin pitch tolerances: ±0.13 (±0.005) Case tolerances: ±0.25 (±0.01) Insulated baseplate Heat-Sink (Option) Heat-sink TEN-HS4 (optional) Order code: TEN-HS4 (cont.: heat-sink, thermal pad, 2 clamps) Heat-sink Thermal pad Material: Aluminum Clamp Converter Finish: Anodic treatment (black) Weight: 17 g (0.60oz) without converter 23.0 (0.91) Thermal impedance after assembling: 10 K/W 18.0 (0.71) Note: max. Before attaching the heatsink, the product label on converter has to be removed for optimal performance. For volume orders we can supply the converters with heatsink already mounted. Please contact us for a relative quotation. Specifications can be changed any time without notice. Rev. 06/12 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com Page 3 of 3 10.2 5.08 (0.4) (0.2) 31.0 (1.22) max. 10.16 10.16 2.5 (0.1) (0.4) (0.4) 20.32 (0.8) 6.0 10.2 25.4 (0.24) (0.40) (1.0)

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products