Industrial Power Supplies TCL Series 24 - 120 Watt Features UL 60950 UL 508C Ultracompact Plastic Case Connection by Cage Clamps Terminals or Plug-in Screw Terminals Reliable snap-on Mounting on DIN-Rails Adaptor for Wall Mounting Universal Input 85-264 VAC, 50/60 Hz Models with 5, 12, 24 and 48VDC Output Output Voltage adjustable Power Good Signal Low Ripple and Noise Overload and Short-circuit Protection Parallel Operation possible Worldwide Safety Approvals The TRACOPOWER TCL series are a new generation of DIN-Rail 3 Year Product Warranty power supplies with an excellent price/performance ratio. With tightly regulated output voltage and high immunity against electrical disturbances on the mains they provide a reliable power source for sensitive loads in industrial process controls, machine tools and other equipment exposed to a difficult industrial environment. Com- pact size, light weight, easy snap-on mounting on DIN-rails and the choice of two connection terminal versions are other features of these power supplies. The TCL series complies with all mayor safety standards for Europe (EN60950, EN50178), North America (UL/ cUL60950, UL508C listed) or elsewhere in the world (with CB-Report IEC60950). Models Ordercode Input Voltage Output Power *Output Voltage Output Current Connection Range max. nom. max. TCL 024-105 5.1 VDC 4.0 A TCL 024-112 12 VDC 2.0 A TCL 024–124 24 VDC 1.0 A TCL 060–112 12 VDC 4.0 A Plug-in Screw TCL 060–124 60 W 24 VDC 2.5 A Terminals 85 –264 VAC TCL 060–148 48 VDC 1.25 A Universal Input TCL 120–112 12 VDC 8.0 A 120 W 50 / 60 Hz TCL 120–124 24 VDC 5.0 A TCL 024–124C 24 W 24 VDC 1.0 A TCL 060–112C 12 VDC 4.0 A TCL 060–124C 60 W 24 VDC 2.5 A Cage-Clamps TCL 060–148C 48 VDC 1.25 A TCL 120–112C 12 VDC 8.0 A 120 W TCL 120–124C 24 VDC 5.0 A *Output adjustable Page 1 of 5 http://www.tracopower.com Industrial Power Supplies TCL Series 24 - 120 Watt Outline Dimensions mm (inches) Input Specifications Input voltage range 85...264 VAC / 85...375 VDC output derating at operation between 85...93VAC/85...130VDC: 15% for TCL 060 & TCL 120 models 20% for TCL 024-112 & TCL 024-124 30% for TCL 024-105 Input frequency 47 – 63 Hz Harmonic limits EN610000-3-2 Class A Input current at full load (typ.) 115 VAC 230 VAC TCL 24 models: 0.35 A 0.2 A TCL 60 models: 1.2 A 0.6 A TCL 120 models: 2.0 A 1.0 A Recommended circuit breaker (characteristic C or slow blow fuse) 5.0 A Output Specifications Output voltage adj. range 5.1 VDC model: 5.0 – 5.25 VDC (pot.meter on frontpanel) 12 VDC models: 12 – 15 VDC (12 - 16 VDC for TCL 024-112) 24 VDC models: 24 – 28 VDC 48 VDC models: 48 – 56 VDC Output regulation (10 to 90% load variation) 2.5% (1% for TCL 60-112) Ripple and Noise (20MHz Bandwidth) < 50 mV pk-pk Electronic short circuit protection current limitation at 120 % typ. (constant current, automatic recovery TCL 24 models: foldback, automatic recovery) Parallel operation output current characteristic suitable for parallel operation of max. 5 units Overvoltage protection, triggerpoint 5.1 VDC model: < 6.5 VDC 12 / 24 VDC models: < 40 VDC 48 VDC models: < 60 VDC Hold-up time 115 VAC 230 VAC min. 15 ms min. 125 ms Power good signal (TCL 60 & TCL 120 only) trigger output signal point (reference to – Vout) 12 VDC models >11V 11.0 V ±1.0V / 60 mA max. 24 VDC models >22V 22.0 V ±2.0V / 30 mA max. 48 VDC models >44V 44.0 V ±4.0V / 15 mA max. General Specifications Temperature ranges – Operating – 10 °C…+70 °C max. – Storage (non operating) – 25 °C…+ 85 °C Temperature derating at 187...264 VAC or 265...375 VDC operation 1.7% /K above 50°C at 93...132 VAC or 130...187 VDC operation 1.1% /K above 40°C at 85...130 VDC operation 1.3% /K above 30°C All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Page 2 of 5 http://www.tracopower.com Industrial Power Supplies TCL Series 24 - 120 Watt Outline Dimensions mm (inches) General Specifications Humidity (non condensing) 95 % rel. H max. Temperature coefficient 0.02 % /K Switching frequency 55 – 180 kHz depending on load (frequency modulation) Efficiency 88% typ. Isolation according to IEC/EN 60950, UL 60950, UL 508, EN 50178, EN 60204, EN 61558-2-8 Reliability, calculated MTBF @ 25°C TCL 24 models >2.68 Mio h (according to IEC-1709) TCL 60 models >2.94 Mio h TCL 120 models >1.62 Mio h Safety standards IEC 60950, EN 60950 (output SELV), UL 60950, UL 508, EN 50178, EN 60204, EN 61558-2-8. - NEC class 2 (TCL 60 models only) Safety approvals (TCL 24 models pending) UL/cUL 60950 recognized, File E181381 UL 508C listed, File E210002 CB-Report per IEC 60950 Electromagnetic compatibility (EMC), Emissions EN 61000-6-3 Electromagnetic compatibility (EMC), Immunity EN 61000-6-2 Safety class degree of protection class 1 Case protection IP 20 (IEC 60529) Enclosure material plastic FR2010-110C (UL 94V-0 rated) Mounting 35 mm DIN-rails as per EN 50022-35x15/7.5 (snap-on with self-locking spring) Adapter for Wall-/Chassi Mounting (included) Options output characteristic optimized for battery charging available on request All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Page 3 of 5 http://www.tracopower.com Industrial Power Supplies TCL Series 24 - 120 Watt Outline Dimensions mm (inches) 100.0 (3.94) OUTPUT TCL 24 1 2 DC-ON LED Output voltage adjust 1 2 3 INPUT Weight: 140g (4.9 oz) Output Innput 1 +Vout 1 AC Ground 2 –Vout 2 Neutral 3 Live 27 (1.06) 100.0 (3.94) OUTPUT TCL 60 1 2 3 4 5 DC-ON LED Output voltage adjust 1 2 3 Weight: 265g (9.4 oz) INPUT Output Innput 1 +Vout 1 AC Ground 2 +Vout 2 Neutral 3 –Vout 3 Live 4 –Vout 5 Power Good 45 (1.77) Tolerances: ±0.5mm (±0.02) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Page 4 of 5 http://www.tracopower.com 75.0 (2.95) 2.2 (0.09) 75.0 (2.95) 3.2 (0.13) Industrial Power Supplies TCL Series 24 - 120 Watt Outline Dimensions mm (inches) 100.0 (3.94) OUTPUT 1 2 3 4 5 TCL 120 DC-ON LED Output voltage adjust Weight: 440g (15.5 oz) 1 2 3 INPUT DIN rail mounting hooks 20mm (0.79) wide Output Innput 1 +Vout 1 AC Ground 2 +Vout 2 Neutral 3 –Vout 3 Live 4 –Vout 5 Power Good 85 (3.35) Tolerances: ±0.5mm (±0.02) Wall Mounting Instead on a DIN-rail, the module can be easily mounted on a chassis or wall with help of a mounting bracket which is supplied as standard with the DC/DC-Converter. Specifications can be changed without notice Rev. 08/04 Page 5 of 5 Jenatschstrasse 1  CH-8002 Zurich  Switzerland Tel. +41-1284 2911  Fax +41-1201 1168  e-mail: sales traco.ch  internet: http://www.tracopower.com @ 75.0 (2.95) 3.2 (0.13)