TME Micro-P3
Specifications
BIOS
Customized emdedded BIOS on 256KB flash memory
BUS
PCI BUS supports 4 BUS master devices
CHIPSET
Intel 815E embedded chipset
CPU
Ultra low power Tualatin (Celeron/Pentium III) processors 500Mhz to 1.4 GHz with 256 KB/512 KB L2 cache
ETHERNET
10/100BASE-T (Intel 82562ET)
FLASH DISK
Supports CompactFlash card Type II up to 6Gbytes
POWER CONSUMPTION
Typical: 5V @ 2.2 A, 3.3V @ .7A [ 900Mhz CPU] 5V @ 6.0A, 3.3V @ 1A [1.4Ghz CPU]
Standard I/O
2 x EIDE (Ultra DMA100), 1 x FDD, 1 x K/B, 1 x Mouse, 2 x serial, 1 x LPT, 4 USB ports (USB 1.0 compliant)
SYSTEM MEMORY
SODIMM socket supports 64, 128/256 or 512 MBytes
WATCHDOG TIMER
Software enable/disable/programmable 2s. to 120 s.
Features
- - 10/100Base-T & CRT/LCD interfaces
- - 2 serial ports, 4 USB ports, 256 Bytes EEPROM, 64-bit unique electronic ID
- - 5 year product availability guarantee
- - Choice of ultra low power Tualatin Pentium III / Celeron CPU from 500Mhz to 1.4Ghz with 256K/512 KB L2 cache
- - Intelligent thermal management with independent microcontroller
- - Less than 4 second boot up time
- - Over 200,000 hours MTBF
- - Small form factor 5.0” X 3.6”
Datasheet
Extracted Text
1.4Ghz Pentium III MICRO-P P3 System On Module SYSTEM ON A MODULE W/ LAN - AUDIO - VIDEO 4 Seconds boot time Over 200,000 H MTBF Features h Choice of ultra low power Tualatin PCI/LPC/SMB BUS Pentium III / Celeron CPU from 500Mhz Pri/Sec EIDE to 1.4Ghz with 256K/512 KB L2 LPT Serial (2) cache USB (4) KB & Mouse 3.6” GPIO (8) Audio h Small form factor 5.0” X 3.6” CRT/LCD-Video 10/100 Base-T +3.3V h 10/100Base-T & CRT/LCD interfaces h 2 serial ports, 4 USB ports, 256 Bytes 5.0” EEPROM, 64-bit unique electronic ID h Intelligent thermal management with independent microcontroller Technical Data h Over 200,000 hours MTBF System CPU Ultra low power Tualatin (Celeron/Pentium III) processors 500Mhz to 1.4 GHz with 256 KB/512 KB L2 cache h 5 year product availability guarantee SYSTEM MEMORY SODIMM socket supports 64, 128/256 or 512 MBytes CHIPSET Intel 815E embedded chipset h Less than 4 second boot up time BIOS Customized emdedded BIOS on 256KB flash memory Audio AC 97 sound Software enable/disable/programmable 2s. to 120 s. WATCHDOG TIMER BUS PCI BUS supports 4 BUS master devices Applications POWER Typical: 5V @ 2.2 A, 3.3V @ .7A [ 900Mhz CPU] CONSUMPTION 5V @ 6.0A, 3.3V @ 1A [1.4Ghz CPU] SIZE 3.6” x 5.0” Robotic TEMPERATURE -0°C ~ 65°C operating Medical OPERATING HUMIDITY 0% ~ 90% relative humidity, non-condensing Test & Measurement I/O Standard I/O 2 x EIDE (Ultra DMA100), 1 x FDD, 1 x K/B, 1 x Mouse, Transportation 2 x serial, 1 x LPT, 4 USB ports (USB 1.0 compliant) Avionics ETHERNET 10/100BASE-T (Intel 82562ET) Mil/Aerospace Display e-Kiosks CHIPSET Built in the Intel 815E embedded North Bridge DISPLAY MEMORY SIZE Share with Main memoy, up to 8 MBytes Industrial Automation RESOLUTION 1280x1024 CRT and TFT LCD display Inventory Management Discription Point Of Sale Terminal MICRO-P3 is a very high performance computer system implemented on a small module ( 5.0” X 3.6”), onboards features includes; 500Mhz - 1.4Ghz CPU, LAN, Audio, Video, 64M-512Mbytes SDRAM, EIDE, USB, etc.... All I/O and PCI BUS signals are brough out to a high density connector so that OEM can design a sim- ple board with form factor and connectors that well fits their own applications, such board can also be designed by TME in less than 4 weeks Toronto MicroElectronics Inc. 5149 Bradco Boulevard, Mississauga, Ontario, Canada. Tel: (905) 625-3203 Fax: (905) 625-3717 www.tme-inc.com sales@tme-inc.com The Shortest path from ideas...to product. MICRO-P P3 System on a Module Features Description CPU Socket 370 supports ultra power Intel Tualitan (0.13 micron technology) Celeron and Pentium III with low core voltage L1 Cache - 16 KB instruction, 16 KB write-back data L2 Cache - 256 KB for Tualitin Celeron CPU, 512 KB for Tualitin Pentium III CPU Core voltage - 1.2V - 1.5V Higher performance than dual 1 GHz Pentium III with Intel 440BX chipset Passive heatsink for processor speeds less than 900 MHz Chipset Intel 815e embedded chipset BUS Speed PCI 2.2 compliance PCI BUS supports 4 BUS master devices on 400-pin High density I/O Connector (HIC) 66-133 MHz FSB BIOS designed for embedded applications with 4 second boot up time, integrated VIDEO BIOS BIOS. CMOS setup is stored on eeprom to prevent the system failure due to battery loss. The Embedded BIOS can be customized with customer’s features SYSTEM MEMORY (SDRAM) One 144-pin SODIMM socket supports 3.3V SDRAM 32 to 512 MBytes (PC-100 and PC-133) Audio Interface AC’97 2.2 Video Interface Intel 815e embedded with 8 MB UMA share memory CRT mode up to 1280 X 1024 @ 24-bit color resolution LCD mode up to 1024 X 768 @ 24-bit color resolution Full 2D/3D DirectX acceleration Hardware motion compensation assist for software Mpeg/DVD decoders Intel 82562ET chipset Network Interface IEEE 802.3u 100 Base-T Fast Ethernet EIDE Interface Integrated dual channel enhanced IDE interface. Support for up to four IDE devices. Support for Ultra DMA/100/66/33 synchronous DMA mode transfers at up to 133 MB/sec Floppy Disk Interface Supports two floppy drives on HIC connector COM1-2 Interface 16C550 compatible, 115K baud max LPT Interface Bi-directional/EPP/ECP compatible USB Interface 4 USB ports (USB 1.0) Peripheral I/O All peripheral I/O on high density I/O connector (HIC loacted on back of board) Other Embedded Features 64-bit Electronic ID System Management Bus (SMBus) Independant microcontroller for thermal management of CPU and ambient temperature with dual redundant CPU fans Serial EEPROM - supports batteryless boot capability 128 Bytes EEPROM available for OEM use ESD 10,000V MTBF 200,000 Hours Software enable/disable/programmable 2s. to 120 s. Ordering Information MP3-14-P Very high performance with 1.4Ghz Pentium III Tualatin (0.13 micron), 512 KB L2 cache, 0°C TO +65°C High performance with Pentium III Tualatin 1.26 GHz (0.13 micron), 512 KB L2 cache CPU, 0°C TO +65°C MP3-12-P Low cost with Tualatin Celeron 1.2Ghz, 256 KB L2 cache CPU, 0°C TO +65°C MP3-12-C Low cost , low power, passive heat sink with Tualatin Celeron 900Mhz, 256 KB L2 cache CPU, 0°C TO +75°C MP3-09-C Low cost , Ultra low power, passive heat sink with Tualatin Celeron 500Mhz, 256 KB L2 cache CPU, 0°C TO +75°C MP3-05-C Ultra low power with Tualatin Celeron 900Mhz, 256 KB L2 cache CPU, -40°C TO +85°C OPERATING TEMPERATURE MP3-09-E Toronto MicroElectronics Inc. 5149 Bradco Boulevard., Mississauga, Ontario, Canada. Tel: (905) 625 - 3203 Fax: (905) 625 - 3717
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the Micro-P3 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods