TEXAS MICRO T4R
Specifications
BIOS
AMIBIOS8
Board Type
Full Size
Chipset
Intel 845E
CPU
Intel Pentium 4 at 2.4GHz and 2.8GHz, Intel Celeron at 2.0GHz and 2.5GHz
LAN
10/100Base-T, Intel 82562ET, Intel 82801DB
Memory
DDR200/266 memory PC1600/PC2100 max 2gb
Processor
Intel Pentium 4
Video
ATI Rage Mobility M1
Features
- ATI Rage Mobility M1 Video
- Intel 845E Chipset
- Intel Pentium 4 @ 2.4GHz and 2.8GHz or Intel Celeron @ 2.0GHz and 2.5GHz
Datasheet
Extracted Text
PRODUCT DATA SHEET T4R SINGLE BOARD COMPUTER +12V Auxiliary +5V Auxiliary DDR200/266 Memory Ultra160 SCSI Floppy Drive Dual USB Ports Dual Ultra ATA/100 Connector Connector Up to 2GB Interface (Optional) Interface (Rev 2.0) EIDE Interfaces Serial Ports Enhanced Bi-Directional Parrallel Interface PS/2 Mouse and Keyboard Interface Speaker Header SXGA Interface LAN 2 - 10/100/1000 Base-T Ethernet Interface LAN 1 - 10/100 Base-T Ethernet Interface ® ® ® Intel Pentium 4 Processor PICMG Connector Memory Controller Hub SCSI Controller ISA Bus I/0 Controller Hub AMI Flash BIOS (Socket 478) The T4R is a single board computer specifically ULTRA160 SCSI INTERFACE (OPTIONAL): BUS SPEEDS: designed to bring high-performance processing The Ultra160 SCSI interface uses an Adaptec AIC-7892 SCSI controller ISA - 16-bit/8MHz to legacy applications. The power-control chip and supports SCSI device data transfer operations up to 160MB/s. PCI - 32-bit/33MHz circuitry on the T4R has been engineered to The interface supports up to 15 SCSI devices, complies with the SPI-3 Hub Interface - 266MB/s standard and is compatible with both single-ended and Low Voltage System or FSB - 400MHz/533MHz accommodate older backplanes and power supply Differential (LVD) SCSI I/O. Software drivers are available for most harness designs. Enhanced video memory and BIOS (FLASH): popular operating systems. drop-in SBC replacement capability enable cost- ® ® The T4R uses AMIBIOS8 . The flash BIOS resides in the Intel 82802 DUAL ETHERNET INTERFACES: effective embedded computing system upgrades. Firmware Hub (FWH). AMIBIOS8 contains useful features such as: ® LAN 1 provides a 10/100Base-T Ethernet interface using the Intel • CMOS setup for system parameters 82562ET Platform LAN Connect device and the ICH4 I/O Controller PROCESSOR: • Peripheral management for configuring on-board peripherals Hub. The 82562/ICH4 combination provides high-speed data transfers • PCI-to-PCI bridge support and PCI interrupt steering ® ® Intel Pentium 4 processor at 2.4GHz and 2.8GHz while offloading communication tasks from the system processor. • Support for flash devices for BIOS upgrading via floppy interface ® ® Intel Celeron processor at 2.0GHz and 2.5GHz LAN 2 supports both 10/100Base-T and Gigabit Ethernet interfaces ® Processor Package: mPGA 478 via the Intel 82540 controller. Some of the other AMIBIOS8 features supported on the T4R include: ® ® The Intel Pentium 4 processor supports a 400/533MHz system • Integrated support for USB mass storage devices such as EIDE ULTRA ATA/100 INTERFACE (DUAL): TM bus as well as Intel's NetBurst micro-architecture. Both features USB CD-ROM, CD-RW, etc. Dual high performance PCI Bus Master EIDE interfaces are capable of combine to provide optimum system performance and fast program • Faster POST execution supporting up to two IDE disk drives each in a master/slave execution in a PCI/ISA single board computer. Some of the processor • Improved BIOS code modularity which streamlines the BIOS configuration. Supports Ultra ATA/100 with synchronous ATA mode features that enable such performance enhancements are: customization process while offering a higher degree of BIOS transfers up to 100MB per second. customization. • Hyper-Pipelined technology DDR200/266 MEMORY: • Streaming SIMD Extensions 2 (SSE2) • Advanced Dynamic Execution The DDR200/266 interface is a single-channel interface coming off the Memory Controller hub and terminating at two DIMM module CACHE MEMORY (L2 AND L1): sockets. The DIMM sockets can be independently populated with ® ® The Intel Pentium 4 processor supports a level two (L2) cache either PC1600 or PC2100 unbuffered memory modules with ECC. ® memory of 512K, while the L2 cache supported on the Intel The memory interface supports auto detection of memory up to 2GB. ® Celeron processor is 128K. Both cache memories are integrated Depending on the processor's system bus speed and the type of on-die Advanced Transfer Cache memories that are 8-way set associa- memory module used, the memory interface bandwidth is either tive and run at full processor core frequency. Both processors include 1600MB/s or 2100MB/s. a 12K level one (L1) Execution Trace Cache and an 8K L1 data cache. SUPER XGA INTERFACE: CHIPSET: TM TM The ATI Rage Mobility M1 video controller has 8MB of on-chip The chipset supports a 400/533MHz system bus, a maximum of two memory and supports up to 1280 x 1024 pixel resolutions. Software double-sided DIMMs with unbuffered DDR 200/266 (PC1600/PC2100) Dependable, always. drivers are available for most popular operating systems. memory with ECC and a 266 MB/s Hub Interface to the ICH4 I/O Controller. TRENTON Technology Inc. • 2350 Centennial Drive, Gainesville, Georgia 30504 • Sales: (800) 875-6031 • Phone: (770) 287-3100 • Fax: (770) 287-3150 E-mail: Sales@TrentonTechnology.com • Web: www.TrentonTechnology.com PRODUCT DATA SHEET ADDR MCH ® Intel DIMM Module Socket Memory ® Pentium 4 DATA (2) Controller Hub DDR Processor DDR200/266 1600 MB or 2100 MB ® Socket 478 CNTL Intel Bandwidth 82845-E LAN 1 Hardware SMBus Ultra 160 SCSI Interface Monitor ® Winbond W83783S Ethernet SCSI Ethernet Hub Link FWH Connectivity Controller Controller Firmware LAN 2 ® Hub Intel Adaptec Intel External 82562ET AIC-7892 82540 Intel Monitor 82802 10/100 Ultra160 10/100 1000 Hub Link Port SMBus LAN To Super PCI Backplane Mouse/ 32-bit/33MHz PCI Bus I/O LPC Keyboard LPC Bus Port PCI-ISA Video ICH4 Serial Speaker Bridge Header Controller I/O Port 1 Winbond Controller ® ™ Serial IDE ATI Rage W83628/ Hub ™ Primary Port 2 Mobility M1 W83629 Parallel IDE Secondary Port Intel To ® 82801 DB SMC Super XGA Floppy Backplane USB 0 ISA Bus 47B272 USB 1 Monitor Port ADDITIONAL T4R FEATURES: T4R APPLICATION CONSIDERATIONS: AGENCY APPROVALS: System Hardware Monitor: Power Requirements: UL60950, CAN/CSA C22.2 No. 60950-00, EN55022:1998 Class B, Typical Values EN61000-4-2:1995, EN61000-4-3:1997, EN61000-4-4:1995, • The Winbond W83783S chip supports hardware monitoring. EN61000-4-5:1995, EN61000-4-6:1996, EN61000-4-11:1994 The functions monitored are: ® ® Intel Pentium 4: CPU +5V* +12V +3.3V - Voltage: +/-12V, +5V and VCORE *+5V only 2.8GHz 12.2A 0.5A None ORDERING INFORMATION: - Fan Speed operation 2.4GHz 11.9A 0.5A None - Temperature ® ® Model Name: T4R Intel Celeron : 2.5GHz 11.7A 0.5A None Model # CPU Speed SCSI Option Watchdog Timer: ® ® Intel Pentium 4: CPU +5V* +12V* +3.3V ® ® Intel Pentium 4 • The programmable watchdog timer provides a system reset *+5 and+12V 2.8GHz 2.5A 4.9A None 6401-107-xM 2.8GHz Yes with a total range of 30ms to 60 seconds. The programmable operation 2.4GHz 2.5A 4.5A None 6401-104-xM 2.4GHz Yes ® ® increments of the watchdog are 30ms, 10s and 60s. Intel Celeron : 2.5GHz 2.5A 4.4A None 6401-127-xM 2.8GHz No 6401-124-xM 2.4GHz No I/O Features: Power Control Circuitry: ® ® Intel Celeron • Two high-speed serial ports Generating +3.3V on board makes the T4R an ideal SBC choice for 6401-507-xM 2.5GHz Yes • Enhanced Bi-Directional parallel interface upgrading embedded computing systems. Trenton offers a +5V auxiliary 6401-502-xM 2.0GHz Yes • Dual Universal Serial Bus (USB, Rev. 2.0) connector jumper cable for use on the SBC. This cable allows the +5V 6401-527-xM 2.5GHz No • PS/2 mouse/keyboard interface from the +5V auxiliary connector to be routed over to the +12V 6401-522-xM 2.0GHz No ® ® • Floppy drive interface auxiliary connector to provide sufficient power for Intel Pentium 4 processors with clock speeds of 2.8GHz or less. The +12V auxiliary Temperature/Environment: Intel, Pentium and NetBurst are trademarks or registered trademarks of Intel power connector can also be used to provide additional power from the Corporation. All other product names are trademarks of their respective owners. • Operating Temperature: 0˚ to 45˚ C. system power supply and must be used when using processors with • Storage Temperature: -40˚ to 70˚ C. clock speeds over 2.8GHz. • Humidity: 5% to 90% non-condensing Copyright ©2005 by TRENTON Technology Inc. All rights reserved. • The T4R's cooling system uses a high-reliability fan mounted Mechanical: to the SBC. Overall dimensions for the T4R, including the active cooling system, are 13.3" L (338mm) x 4.8" H (121.9mm) x 1.65" W (41.9mm). STANDARDS: • IEEEP996, Personal Computer Bus Standard • PCI Local Bus Specification 2.1 • PICMG 1.0 Specification • Ultra160 SCSI, SPI-3 Standard Dependable, always. TRENTON Technology Inc. • 2350 Centennial Drive, Gainesville, Georgia 30504 • Sales: (800) 875-6031 • Phone: (770) 287-3100 • Fax: (770) 287-3150 E-mail: Sales@TrentonTechnology.com • Web: www.TrentonTechnology.com 8416401 02085 1.0
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the T4R have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods