HS ETHERNET PSON USB VIDEO OSS 1 2 3 4 LEDs COMM PRODUCT DATA SHEET M MC CP P6 67 79 92 2 MCP6792 MCP6792 Processor AMC (PrAMC) Module ® Dual Channel DDR3-1066 Intel Core™ 2 Duo Memory Interface Up to 4GB* Processor Dual USB 2.0 Ports (Full-Size Front Panel) Diagnostic 10/100/1000Base-T LEDs Ethernet Interface Video Interface COMM Port (Full-Size Front Panel) ® AMC Card Edge Connector Optional Storage Drive RoHS Compatible Mobile Intel GS45 Express Chipset TRUSTED PLATFORM MODULE (TPM): MODULE MANAGEMENT CONTROLLER (MMC): Trenton's MCP6792 is a Processor AMC module ® ® The MCP6792 is compliant with version 1.2 of the Trusted The MCP6792’s MMC or Module Management Controller designed for insertion directly into MicroTCA (uTCA ) ® Computing Group specification for Trusted Platform Modules via supports the Intelligent Platform Management Interface (IPMI) backplanes or the AMC slots of an AdvancedTCA ® theuse of the Atmel ATC97SC3203 TPM. The card’s TPM and ® commands for monitoring the following functions: ® ® (ATCA ) blade or carrier card. The full- or mid-size thechipset’s Intel Trusted Execution Technology (Intel TXT) • Board temperature • Voltage levels • Payload Status front panel configuration of the MCP6792 provides maximizes the security and integrity of any system design using a A shelf manager’s MicroTCA Carrier Management Controller support for a broad array of uTCA and ATCA chassis Trenton MCP6792 Processor AMC module. (MCMC) sends and receives data along the Intelligent Platform styles and applications. The AMC's Small Form Factor Management Bus (IMPB) to and from various MicroTCA system SERIAL ATA/300 PORTS: (SFF), dual-core processor options deliver impressive components including the MCP6792 card. The card’s MMC uses The primary and secondary Serial ATA/300 (i.e. SATA II 300) ® MCP6792 performance. An extended life Intel the data to manage monitor functions, provide appropriate ports on the MCP6792 are available for use on the AMC’s card ® output signals and drive the status LEDs on the front on the Core™ 2 Duo Processor and the Mobile Intel GS45 edge connector. AMC. These status LEDs indicate Hot Swap Status, Health and Express Chipset are used on the Trenton MCP6792 to FRONT PANEL CONFIGURATION OPTIONS: Out Of Service conditions. The MMC also manages the interface ® enable 4GB of DDR3 memory, multiple PCI Express to the Hot Swap Switch located on the AMC’s front panel. Single-Width, Full-size (28.95mm) - One 10/100/1000Base-T links, three Ethernet interfaces and much more. Ethernet, one video, one COMM, two USB 2.0 ports CARD EDGE INTERFACES: PROCESSOR: and four diagnostic LEDs ® Trenton’s MCP6792 Processor AMC (PrAMC) module supplies Single-Width, Mid-size (18.96mm) - One 10/100/1000Base-T Intel Core™ 2 Duo Processor SP9300 - 2.26GHz ® two 1000Base-BX Ethernet interfaces to the AMC’s card edge Ethernet, one video and Intel Core™ 2 Duo Processor SL9400 - 1.86GHz ® connector. Other fabric interfaces available on the card edge one USB 2.0 port Intel Core™ 2 Duo Processor SU9300 - 1.2GHz connector are one x4 and one x1 PCI Express link with a PCIe Processor Package: SFF (22mm x 22mm) BGA reference clock. A MicroTCA backplane or ATCA carrier card may ® DDR3-1066 MEMORY INTERFACE: The Intel processoroptions on the MCP6792 support a use the x4 PCI Express link as four x1 PCIe links resulting in five The DDR3-1066 interface is a dual- channel interface originating 1066MHz or 800MHz system bus depending on the choice of ® x1 PCIe links available for use in a system application with the at the Intel GS45 Graphics Memory Controller Hub (GMCH), processor. All of the processor options support both 64-bit and Trenton MCP6792. The PCIe links on the card edge connector with each channel terminating at an SO-DIMM module socket. 32-bit applications. Other processor features: are user configurable via AMC dip switch settings. Other card The MCP6792 supports system memory transfer rates of either • Dual-Core, low voltage or ultra low voltage processor option edge interfaces include the IPMB for the AMC’s Management ® 800 or 1066MHz using unbuffered, non-ECC, PC3-6400 or PC3- • 6M L2 Cache (Intel Core™2 Duo Processor SL9400 & SP9300) Controller and support for two SATA II 300 ports. ® 8500 SO-DIMMs. The MCP6792’s two SO-DIMM sockets support • 3M L2 Cache (Intel Core™2 Duo Processor SU9300) a maximum memory capacity of 4GB*. ETHERNET INTERFACES (AMC CARD EDGE CONNECTOR): CHIPSET: *Additional memory support of 8GB currently under evaluation ® The Mobile Intel GS45 Express Chipset enables the card's dual- The MCP6792 uses an internal x4 PCI Express link from the x16 ® channel DDR3-1066 memory interface. The AMC's Intel I/O port of the GS45 GMCH to connect to the dual-port Gigabit Controller Hub 9M (ICH9M) provides multiple Gigabit Ethernet Ethernet controller chip. This design feature enables two very fast 1000Base-BX Ethernet interfaces from the AMC’s card edge LANs, configurable PCI Express links and SATA ports on the connector to either a MicroTCA backplane or to the AMC carrier MCP6792's card edge. The AMC's chipset implementation also supports the following: card slots on an ATCA blade. The LAN interfaces provided by • Trusted Platform Module (TPM) the MCP6792 are designed to provide robust Ethernet ® ® communications in MicroTCA and AdvancedTCA system • Intel Trusted Execution Technology (Intel TXT) Dependable, always. applications. • Module Management Controller (MMC) TRENTON Technology Inc. 2350 Centennial Drive, Gainesville, Georgia 30504 Sales: (800) 875-6031 Phone: (770) 287-3100 Fax: (770) 287-3150 E-mail: Sales@TrentonTechnology.com Web: www.TrentonTechnology.com TQ9 PRODUCT DATA SHEET M MC CP P6 67 79 92 2 MCP6792 MCP6792 SO-DIMM Socket ® Intel 1A DDR-A GMCH 1066MHz Front Side Bus Core™ 2 Duo DDR3-1066* Channel A Graphics Memory Controller Hub Also supports 800MHz FSB Processor Small Form Factor (SFF) processors Small Form Factor (SFF) SO-DIMM Socket GS45 PCIe DDR-B Video 1B Video DMI x16 Channel B (I/O Bracket) DDR3-1066* *Also supports DDR3-800 SO-DIMMs. The maximum memory supported is 4GB. Ethernet LAN 1 x4 PCI ® PCI Express x4 Trusted Controller Express 1000Base-BX Platform Intel Module LAN 2 82571EB Atmel DMI AMC Edge AT97SC3203-X9A10 PCI Express one x4 or four x1links PCIe[0:3] Connector PCI Express x1 PCIe[4] LPC SATA 0 SATA0 SATA 1 SPI SATA1 SPI Flash SIO ICH9M I/O Controller Hub Serial Port 1 Serial Port 2 (SFF) Ethernet Ethernet Interface Module Management Optional PHY LCI LAN 3 Intel Solid State 10/100/1000Base-T (I/O Bracket) Controller G_Tx\Rx 82567 Storage Voltage Monitoring USB 0 Drive USB3 USB0 Temperature Monitoring (I/O Bracket) Payload Monitor 2 USB1 USB 1* Front Panel LEDs To I C Watchdog Timer Intel IPMB on AMC AM82801UX COM* Actel Card Edge AFS600-FGG256 *Full Size Serial Port Out Card Only STANDARDS: UNIVERSAL SERIAL BUS INTERFACES (USB 2.0): MCP6792 APPLICATION CONSIDERATIONS: ® • PCI Express Base Specification 1.1 Power Requirements: Two USB 2.0 interfaces are supported in the full-size front panel ® Typical Values - CPU Idle State: • PCI Industrial Computer Manufacturers Group (PICMG ) configuration of the MCP6792 and one USB port is available in ® AMC.0, R2.0 Specification CPU Speed Intel No. +12V +3.3V* the mid-size front panel. ® • PICMG AMC.1, R2.0 Specification (PCI Express Implementation) 2.26GHz SP9300 1.17A 0.15A ® BIOS (FLASH): 1.86GHz SL9400 1.09A 0.15A • PICMG AMC.2 Specification (Ethernet Implementation) ® ® 1.2GHz SU9300 1.16A 0.15A • PICMG AMC.3 Specification (Storage Implementation) The MCP6792 uses AMIBIOS8 . The BIOS resides in the AMC’s two ® SPI flash modules. AMIBIOS8 contains features such as: • PICMG MTCA.0, R1.0 Specification (MicroTCA) ® Typical Values - 100% CPU Stress State: • Support for flash devices for BIOS upgrading • PICMG 3.0, R3.0 Specification (AdvancedTCA) ® CPU Speed Intel No. +12V +3.3V* • Integrated support for USB mass storage devices such 2.26GHz SP9300 2.70A 0.15A as USB flash drives, DVD-RW, CD-ROM, CD-RW, etc. ORDERING INFORMATION: 1.86GHz SL9400 2.08A 0.15A • Boot from network, USB mass storage devices or SATA Model Name: MCP6792 ® 1.2GHz SU9300 1.98A 0.15A drives Model # CPU Speed Intel No./FSB Embedded CPU Tolerance for all voltages is +/- 5% • SATA support includes 48-bit LBA addressing to support Single Width, Full Size Configuration All processors listed are dual core CPUs 4GB of system memory was installed during power testing SATA hard drives capacities over 137GB 6792-005-xM 2.26GHz* SP9300/1066MHz Yes *Management Power current draw is typically less than 150mA 6792-103-xM 1.86GHz SL9400/1066MHz Yes OPTIONAL ON-BOARD STORAGE: 6792-201-xM 1.2GHz SU9300/800MHz Yes Temperature/Environment: The card supports compact, fast access, local data storage via a plug-in 0 0 Operating Temperature: -10 to 55 C. USB solid state drive or SSD. The common file access times for these 0 0 Single Width, Mid Size Configuration Storage Temperature: -20 to 70 C. latest generation SSDs frequently outperforms the file access times of 6792-153-xM 1.86GHz SL9400/1066MHz Yes Humidity: 5% to 90% non-condensing many HDDs. These optional solid state drives are available in several 6792-251-xM 1.2GHz SU9300/800MHz Yes different storage densities up to a maximum of 8GB. (xM = Memory) Mechanical: *2.26GHz CPU option available on full size configuration only A standard low profile, passive cooling solution is used on the MCP6792 card. This passive heat sink complies with the height The stated bus speed, memory and communication interface speeds are AGENCY APPROVALS: component maximums; actual system performance may vary. and space restrictions defined in various AMC, ATCA and uTCA Designed for UL60950, CAN/CSA C22.2 No. 60950-00, Intel and Intel Core 2 Duo are trademarks/registered trademarks of Intel Corporation. industry specifications. The AMC’s overall card dimensions are EN55022:2006 Class B, EN61000-4-2:2001, EN61000-4-3:2005, All other product names are trademarks of their respective owners. 7.11” (18.05cm) L x 2.89” (7.34cm) H. The single-width, EN61000-4-4:2006, EN61000-4-5:2006, EN61000-4-6:2006, full-size, front panel height dimension is 1.103” (28.00mm) and Copyright © 2009 by TRENTON Technology Inc. All rights reserved EN61000-4-11:2004 the height of the single-width, mid-size front panel is 0.709” Designed for NEBS compliant systems testing. (18.00mm). TRENTON Technology Inc. 2350 Centennial Drive, Gainesville, Georgia 30504 Sales: (800) 875-6031 Phone: (770) 287-3100 Fax: (770) 287-3150 E-mail: Sales@TrentonTechnology.com Web: www.TrentonTechnology.com 8416792 11259 1.1