TEXAS MICRO LS486DX2/66
Features
- 128KB of Flash memory for BIOS and user application field upgrades
- 3.5" and 5.25" floppy disk controller (360K, 720K, 1.2MB and 1.44MB)
- 66MHz 486DX2 processor or 33MHz 486SX processor
- Asynchronous bus clock of 8, 10, 12MHz
- Auxiliary boot ROM for instances of Flash programming error or failure
- Hardware programmable (via jumpers) Watchdog Timer; three time-out periods: 150 ms, 600 ms, or 1.2 sec
- IDE and SCSI (Adaptec 6360) hard drive interfaces (BIOS support for large capacity IDE)
- Internal 8KB cache
- Meets FCC Class A and CISPR 22 Class B specifications
- One RS-232 serial port and one RS-232/422/485 configurable serial port
- One software configurable parallel port (uni-directional and bi-directional)
- Optional extended VGA video controller with support for 800 x 600 resolution and 16 of 256 colors; 256KB non-upgradeable video memory
- Texas Micro extended Phoenix™ BIOS with SETUP program stored in BIOS ROM
- Up to 32MB of on-board DRAM
- Video is register and BIOS-level compatible with the IBM VGA™ adapter, and maintains downward register-level compatibility with existing EGA/CGA/MDA graphics standards
Datasheet
Extracted Text
MODEL L486, LS486 SINGLE-BOARD COMPUTERS FOR ISA PASSIVE BACKPLANE SYSTEMS DOC# 1875 Socketed 80486DX2 Optional SCSI IDE Hard Floppy Serial Port #2 Processor Controller Drive Controller Drive Controller (configurable as RS232C, RS422 or RS485) Serial Port #1 Parallel Port AT Keyboard TM Socketed SIMM AT Bus Interface (accepts 1MB x 36, Flat Pack (S)VGA Daughter and 4MB x 36) 80486SX Card Socket 128KB Processor Flash EPROM FULL SIZE 80486 EMBEDDED SBC � Auxiliary boot ROM for instances of Flash programming error Texas Micro's Models L486 and LS486 are single-board or failure IBM AT® compatible computers designed and built for reliable, low cost operation in industrial, medical and embedded control applications. � Hardware programmable (via jumpers) Watchdog Timer; Highly integrated, the single-slot design of the L(S)486, either 66MHz three time-out periods: 150 ms, 600 ms, or 1.2 sec 486DX2™ or 33MHz 486SX™, features multifunction I/O control � Texas Micro extended Phoenix™ BIOS with SETUP program including flex/floppy diskette and IDE hard disk control, one RS-232 stored in BIOS ROM serial port, one RS-232/422/485 configurable serial port, a bi-directional parallel port, and up to 32MB of DRAM. It is socketed to support an � IDE and SCSI (Adaptec 6360) hard drive interfaces optional field upgradeable extended VGA (SVGA) video graphics (BIOS support for large capacity IDE) daughter card. The LS486 includes an integrated 8-bit “fast” SCSI � 3.5" and 5.25" floppy disk controller (360K, 720K, 1.2MB and controller as well as IDE. 1.44MB) To enable future performance upgrades, the L(S) 486/33 provides TM � One RS-232 serial port and one RS-232/422/485 configurable a PGA socket supporting available Intel 486DX33 or DX2 CPUs, serial port standard or “OverDrive.” With 1Mb of Flash memory, speaker and keyboard ports, and � One software configurable parallel port (uni-directional and 8KB internal cache, the Models L486/LS486 make excellent economic bi-directional) sense in CPU price/performance/function as an embedded CPU in a � Optional extended VGA video controller with support for wide variety of card cage or full chassis applications. 800 x 600 resolution and 16 of 256 colors; 256KB non-upgradeable video memory KEY FEATURES � 66MHz 486DX2 processor or 33MHz 486SX processor � Video is register and BIOS-level compatible with the IBM VGA™ adapter, and maintains downward register-level � Up to 32MB of on-board DRAM compatibility with existing EGA/CGA/MDA graphics standards � Internal 8KB cache � Meets FCC Class A and CISPR 22 Class B specifications � Asynchronous bus clock of 8, 10, 12MHz � Two year limited warranty � 128KB of Flash memory for BIOS and user application field upgrades Texas Microsystems, an ISO 9001 certified manufacturer, has been designing and manufacturing industrial computers and components since 1975. A founding member of PICMG, they developed the industry’s first PC compatible computers using passive backplanes. The company offers a full line of rugged rackmount, benchtop, and mobile computer systems, CPU cards and add-on peripherals; and SPARC telecommuications/internetworking servers. Texas Microsystems' products are manufactured in the USA specifically for industrial automation, computer telephony integration, and other mission critical, high reliability applications. MODEL L(S)486 CPU FAMILY OF SINGLE-BOARD AT COMPATIBLE COMPUTERS SPECIFICATIONS � BIOS Features: Built-in extended set-up � CPU: 66MHz 80486DX2 socketed Programmable bus and I/O speeds 33MHz 80486SX flat pack Programmable CPU and memory wait states � Co-processor: Not supported AT compatible Phoenix™ BIOS with � Upgrade PGA socket: Supports 33MHz 80486DX extensions for diskless, keyboardless and and 33/66MHz 80486DX2 processors videoless operation System and video BIOS shadowing � Form Factor: 13.25" (33.66 cm) x 4.75" (12.45 cm) � Clock/Calendar: Real-time clock backed by an on-board � Memory Architecture: lithium battery From 4MB to 32MB on board 2 banks of 1 SIMM socket each using any mix of 1M � External Connection: or 4M x 36-bit SIMM DRAM IDE and flex/floppy (shrouded headers) Near zero wait states using 70ns SIMMs @ 33MHz SCSI (shrouded header) Fast page mode DRAM Serial port 1 (DB9 on slot bracket) Supports LIM EMS 4.0 memory drivers Configurable Serial port 2 (header) Bi-directional parallel port (DB25 on slot bracket) � Bus Interface: AT bus (98 pin) fully buffered AT keyboard (locking header) 20 bus slot drive Speaker (locking header) � Addressing: Real and protected mode supported Reset (locking header) Real address mode - 20-bit Optional keyboard (header) Protected address mode - 16-bit on bus � Optional VGA daughter card with support for 800 x 600 access resolution (selected drivers available). � Data Path: 32-bit internal; 16-bit on bus access � Operating systems compatibility: � Interrupts: 15 level available TM TM TM LS486 & L486: PC and MS-DOS , OS/2 , Windows � DMA Channels: Four 8-bit, three 16-bit TM TM and Windows NT , SCO XENIX , � Cache: 8KB internal TM TM TM TM UNIX , QNX , PICK ; Novell Netware and other NOS environments � Flash Memory: 1Mb (128KB) TM TM L486 Only: iRMX for PCs, iRMX for Windows � Power Requirements: Input power 16.5W +5V 1.6 - 2.8A +12V 0.1A -12V 0.1A OPERATING NON-OPERATING ENVIRONMENTAL 0° to 60°C (32° to 140°F) -40° to 70°C (-40° to 158°F) Temperature 0% to 95%, non-condensing 0% to 95%, non-condensing Humidity ORDERING GUIDE MODEL NUMBER 66MHz 486DX2 Single-board computer with 8KB cache L486DX2/66 66MHz 486DX2 Single-board computer with 8KB cache and SCSI controller LS486DX2/66 33MHz 486SX Single-board computer with 8KB cache L486/33 33MHz 486SX Single-board computer with 8KB cache and SCSI controller LS486/33 1MBx36x70ns DRAM SIMM TMM-10036/70 4MBx36x70ns DRAM SIMM TMM-40036/70 VGA daughter card for L486/33 & LS486/33 CPUs L386VGA 12-inch serial cable for configurable port for CPU SCF1 6-inch video cable for video card (15 pin in D sub 9 pkg. on slot bracket) VCF1 12-inch video cable for video card (15 pin in D sub 9 pkg. on slot bracket) VCF2 Dual, 12-inch combo serial video cable (DB 9 and 15 pin in D sub 9 pkg. on slot bracket) SVCF1 All trademarks referenced are the service mark, trademark or registered trademark 1996 Texas Microsystems, Inc. of the respective manufacturer. Specifications subject to change without notice. 06/01/96 © Printed in the USA. Rev. 1.01
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the LS486DX2/66 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods