TEXAS MICRO CP16
Features
- Floppy drive interface
- Programmable watchdog timer
- PS/2 mouse/keyboard interface via J5
- Two high-speed serial ports
Datasheet
ProductDataSheet_CP16_613-1431700117.pdf
670 KiB
Extracted Text
PRODUCT DATA SHEET ® CP16 CompactPCI SINGLE BOARD COMPUTER DDR200/266 Memory Up to 2GB PMC Card Connectors ® ® Intel Pentium M Processor IPMI Controller (optional) Local Storage Option IDE Connector Video Controller 32/64-bit, 33/66MHz Full-Speed 10/100/1000Base-T UXGA Interface USB Interfaces Serial Port 1 Reset Switch Status LEDs PMC Card Slot Ethernet Interfaces The flexible design features of Trenton's CP16 PACKET SWITCHING BACKPLANE SUPPORT: BIOS (FLASH): enable the SBC to excel in a wide variety of The CP16’s BIOS is AMIBIOS8 with optional IPMI extensions. The Channel B of each Ethernet controller provides a redundant applications. Optional plug-in local storage, flash BIOS resides in the 82802 Firmware Hub (FWH). Some of 10/100/1000Base-T Ethernet interface via connector J3 to the ® the ability to switch off the CompactPCI bus, the key features of the BIOS are: CompactPCI backplane. This allows Ethernet communication and ® • Boot from network, USB mass storage devices, IDE, ATAPI or SCSI PICMG Packet Switching Backplane, Hot Swap control between the CP16 and other boards in the CompactPCI • Serial port console redirection to support headless operation chassis. The interface implementation is fully compatible with the and IPMI support enable the CP16 for use in ® PICMG 2.16, R1.0 specification. • Optional IPMI v1.5 Baseboard Management Controller (BMC) CompactPCI system board or server blade support computing applications. ® CompactPCI BUS: •BMC console (text) redirection ® • Intel SpeedStep support The CP16 provides direct support for up to seven expansion • Optional CompactPCI bus support PROCESSOR: CompactPCI slots at 32-bit/33MHz and up to four expansion slots • Supports either system board or blade card applications at 64-bit/66MHz. Each slot provides support for PCI Bus mastering. ® ® Intel Pentium M processor at speeds of 1.3GHz to 1.8GHz* The CompactPCI bus can be turned off via the CP16’s CompactPCI DUAL ETHERNET INTERFACES - 10/100/1000BASE-T: Processor Package: Micro-FCPGA bus switches for server blade applications. *Higher speeds as available An internal 64-bit/100MHz PCI-X bus connects to the Intel 82546EB Ethernet controllers, ensuring full-speed Gigabit Ethernet in applications ® ® LOCAL STORAGE OPTION: The Intel Pentium M processor combines micro-architecture using 1000Base-T Ethernet communications. Channel A on each enhancements with innovative power management techniques A Compact Media Daughter Card (CMDC) plugs into connector controller supports 10/100/1000Base-T Ethernet connectivity to the to produce a processor ideal for CompactPCI applications. These ™ P11A on the CP16 and provides support for either a CompactFlash RJ-45 connectors located on the CP16’s front panel. Channel B on enhancements and innovations include: or Microdrive storage device. In server blade applications this option each controller enables the SBC’s Packet Switching Backplane •A 2MB Level 2 (L2) cache memory is available on processor is useful for storing the operating system and application. capability. speeds 1.8GHz and above. Processors below 1.8GHz have an L2 cache of 1MB. HOT SWAP & IPMI SUPPORT: REAR TRANSITION MODULE (OPTIONAL): ® • Enhanced Intel SpeedStep Technology (EIST) ® The CP16 offers standard support for the Hot Swap (PICMG 2.1, The RTM25 is available for use in CP16 applications where rear •Processor speeds of 1.8GHz and above are produced using ® access I/O panel connectors are required. The RTM25 is not R2.0) and Hot Swap Infrastructure (PICMG 2.12, R2.0) specifications Intel’s 90nm process technology. Processors below 1.8GHz required for the CP16 to function. The RTM25’s optional with optional support available for the Intelligent Platform Management use the .13 micron process. ® Ultra320 SCSI interfaces utilize the high-speed, 1GB/s Hub Link Interface (IPMI, PICMG 2.9, R1.0). Consult Trenton for ordering details. • New micro-op engine (Micro-op fusion) 2.0 interface from the CP16’s E7501 Memory Controller Hub. • Demand Based Switching (DBS) BUS SPEEDS: • Advanced branch prediction unit CompactPCI Bus - 32-bit/33MHz, 32-bit/66MHz, CHIPSET: 64-bit/33MHz, 64-bit/66MHz PCI-X Local Bus - 64-bit/100MHz The CP16 uses Intel’s E7501 chipset which provides support for PCI Local Bus - 32-bit/33MHz & 64-bit/66MHz DDR200/266 memory with ECC and a high-speed Hub Link 2.0 ® ® interface. Intel Pentium M processors support a 400MHz FSB. Hub Link 2.0* - 1GB/s System or FSB - 400MHz PMC OPTION CARD SLOT: *Hub Link D is routed to J4 for high-speed interface usage on the optional RTM25. PMC 32/64-bit, 33/66MHz option cards are supported by the Dependable, always. CP16 via an access slot in the SBC’s front panel. TRENTON Technology Inc. • 2350 Centennial Drive, Gainesville, Georgia 30504 • Sales: (800) 875-6031 • Phone: (770) 287-3100 • Fax: (770) 287-3150 E-mail: Sales@TrentonTechnology.com • Web: www.TrentonTechnology.com PRODUCT DATA SHEET LEGEND ADDR MCH DIMM Module Socket ® DDR-A Pentium M Memory CP16 Backplane DDR200/266 DATA Processor 1600 MB/s Controller Hub Connector Bandwidth ® DDR-B Intel E7501 CNTL mPGA479M Socket Front Panel Optional IPMI Hub A Hub B Hub C Hub D Port FWH Hardware Firmware Monitor Hub P64H2 B J3 National PCI/PCI-X ® Intel 82802 ® Semiconductor 64-bit Hub PC87435 A 64-bit/66MHz ® Optional Intel J4 LPC Bus 82870P2 On-board PCI Bus Voltage PMC Card To RTM25 Temp Fans IPMB for optional Ultra320 SCSI Ethernet ® PICMG 2.16 CH A Hub Link B J3 Controller J4 J1 ® LAN 1 PCI-X Intel 10/100/1000 A P1A P64H2 B Bus 82546EB Super LPC Base-T PCI/PCI-X 64-bit/ I/O 100MHz 64-bit Hub J5 Mouse/ Ethernet ® B J3 PICMG 2.16 CH B J5 IDE Keyboard ® A Intel Primary Controller Port 82870P2 ICH3 LAN 2 ® Intel A P1B I/O 10/100/1000 J5 IDE Serial 82546EB Base-T Secondary Compact PCI Bus Port 1 Controller 64-bit/66MHz Hub ® J5 USB 2 J5 Serial Compact PCI To USB 3 J1 & J2 Port 2 Backplane Bus Switches P11A J5 Floppy Compact J4 Video Port ™ Flash or ® 32-bit/33MHz Controller Ultra XGA Microdrive PCI Monitor ® ATI ® On-board PCI Bus Intel SMSC M6-C16H USB 0 82801CA LPC47B272 USB 1 ULTRA XGA INTERFACE: CP16 APPLICATION CONSIDERATIONS: AGENCY APPROVALS: ® The ATI M6-C16H video controller enables 2D/3D video acceleration Power Requirements: Designed for UL 1950, CAN/CSA C22.22 Number 950-95, and provides 16MB of integrated video DDR memory. The video Typical Values EN55022:1994/A2:1997, CLASS A, EN55024, EN6100-6-2:1999, controller supports pixel resolutions up to 1600 x 1200 (UXGA). EN61000-3-2:2001 PROCESSOR +5V +12V +3.3V Software drivers are available for most popular operating systems. 1.8GHz* 6.25A 0.20A 4.10A ORDERING INFORMATION: 1.8GHz** 4.03A 0.20A 5.96A DUAL ULTRA ATA/100 INTERFACES: 1.6GHz* 6.20A 0.20A 3.99A Model Name: CP16 1.6GHz** 4.00A 0.20A 5.80A Dual high-performance PCI EIDE interfaces are capable of supporting Model # CPU Speed FSB Speed -12V @ <100mA with IPMI up to two IDE disk drives each in a master/slave configuration. The 6137-206-xM 1.8GHz With J4 I/O *5V(I/O) configured backplane interfaces support Ultra ATA/100 with synchronous ATA mode 6137-004-xM 1.6GHz With J4 I/O **3.3V(I/O) configured backplane transfers up to 100MB per second. The interfaces are routed 6137-246-xM 1.8GHz Without J4 I/O Temperature/Environment: 6137-044-xM 1.6GHz Without J4 I/O through backplane connector J5. Dual EIDE connectors are available Operating Temperature: 0° to 55° C. with 350 LFM of airflow without IPMI on the optional RTM25 rear transition module. 6137-706-xM 1.8GHz With J4 I/O Storage Temperature: -20° to 70° C. with 350 LFM of airflow 6137-504-xM 1.6GHz With J4 I/O DDR200/266 MEMORY: Humidity: 5% to 90% non-condensing 6137-746-xM 1.8GHz Without J4 I/O Cooling Solution: Passive Heat Sink 6137-544-xM 1.6GHz Without J4 I/O The CP16 provides a single channel DDR memory interface (xM = Memory) terminating at a DIMM socket. The memory interface supports up STANDARDS: Rear Transition Module to 2GB of memory and has an interface bandwidth of 1600MB/s. with SCSI • PCI Local Bus Specification 2.1 The SBC accepts a single ECC, registered PC1600 or PC2100 DIMM. 6142-000 RTM25 With J4 I/O ® ® • CompactPCI Core Specification, PICMG 2.0, R3.0 without SCSI UNIVERSAL SERIAL BUS (USB): ® ® 6142-020 RTM25-NS With J4 I/O • CompactPCI Hot Swap Specification, PICMG 2.1, R2.0 6142-040 RTM25-NJ Without J4 I/O ® A total of four (4) USB ports are available on the CP16. USB ports • CompactPCI Hot Swap Infrastructure Specification, Model Name: CMDC ® 0 and 1 are located on the CP16’s front panel and USB ports 2 and PICMG 2.12, R2.0 Model # Description 3 are available at connector J5. The CP16’s E7501 chipset supports ® 6245-000 With Type 2 media connector • CompactPCI PCI Telecom Mezzanine Card (PTMC) USB revision 1.1. ® Specification, PICMG 2.15, R1.0 Intel, Pentium and SpeedStep are trademarks or registered trademarks of ® ® ADDITIONAL CP16 FEATURES: Intel Corporation. All other product names are trademarks of their respective owners. • CompactPCI System Management Specification, PICMG 2.9, R1.0 (Intelligent Platform Management Interface (IPMI) Copyright ©2004 by TRENTON Technology Inc. All rights reserved. •Two high-speed serial ports support) • PS/2 mouse/keyboard interface via J5 ® • Floppy drive interface • CompactPCI Packet Switching Backplane Specification, •Programmable watchdog timer PICMG∆ 2.16, R1..0 FORM FACTOR: The CP16 is a single-slot module (4HP width) with a 6U height ® and is fully compliant with the CompactPCI Core Specification: ® PICMG 2.0, R3.0. Dependable, always. TRENTON Technology Inc. • 2350 Centennial Drive, Gainesville, Georgia 30504 • Sales: (800) 875-6031 • Phone: (770) 287-3100 • Fax: (770) 287-3150 E-mail: Sales@TrentonTechnology.com • Web: www.TrentonTechnology.com 8416137 04145 1.1
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the CP16 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods