+ 1 - 9 72 - 234 - 4343 info@voxtechnologies.com PRODUCT DATA SHEET ™ NLT (SHB Express ) SYSTEM HOST BOARD ® ™ Dual Intel Xeon Processors Dual USB Ports Interfaces Dual Ultra ATA/100 Dual Channel DDR2-400 Memory Interface (Rev. 2.0) Interfaces Up to 8GB Dual Serial ATA/150 Interfaces Dual USB Ports (Rev. 2.0) UXGA Interface Dual Full-Speed 10/100/1000Base-T Ethernet Interfaces ™ ™ Power & Backplane I/O Connector C PCI Express Connector B PCI Express Connector A TM TM Trenton Technology’s NLT system host board turns PCI EXPRESS INTERFACES: PCI EXPRESS CONFIGURATION AND BUS SPEEDS: TM the promise of PCI Express into a reality. The High-speed serial links that make up PCI Express interfaces typically PCI Express - Edge Connectors A & B - Two x8 links, one x4 link high-speed SHB-to-backplane PCI Express links have data rates twice that of PCI interfaces. A basic PCI Express link - Five reference clocks employed on the NLT strip away parallel bus band- consists of at least one pair of differentially driven transmit and receive PCI Express - (on-board only) - One x4 link signal lines. PCI Express link bandwidth is increased linearly by adding PCI-X (on-board only) - 64-bit/66MHz width limitations while unleashing the processing ® TM signal pairs to form multiple lanes or wider lane widths. The most PCI (on-board only) - 32-bit/33MHz power of the next generation Intel Xeon proces- common PCI Express links used today are configured to have lane Hub Link 1.5 - 266MB/s ® sors. The NLT features the Intel E7520 chipset, widths of x1, x4, x8 or x16. Trenton’s NLT system host board provides System or FSB - 800MHz an 800MHz system bus, dual DDR2-400 memory two x8 PCI Express links, one x4 PCI Express link and five PCI Express SERIAL ATA/150 PORTS (DUAL): interfaces, dual Gigibit Ethernet ports and advanced reference clocks on edge connectors A and B. These PCI Express links TM are used on SHB Express backplanes to support PCI Express option video. PCI Express, PCI and PCI-X option card The primary and secondary Serial ATA (SATA) ports on the NLT boards cards and bridge chips that provide PCI/PCI-X option card support. support makes the NLT an ideal choice for current comply with the SATA 1.0 specification and support two independent During system initialization the NLT automatically negotiates with the as well as future industrial computing applications. SATA storage devices such as hard disks and CD-RW devices. SATA PCI Express cards connected to the PCI Express links in order to set up technology provides lower-pin counts, reduced signaling voltages, communication between the devices. The net result is that the NLT PROCESSORS: simplified cabling, CRC error detection and hot-plug device support. system host board supports communication to x1, x4, x8, x16 PCI SATA produces higher performance interfacing by providing data transfer ® TM Express boards as well as PCI/PCI-X cards via PCI Express-to-PCI/PCI-X Dual Intel Xeon Processors at 2.8GHz to 3.6GHz* rates up to 150MB per second on each port. Processor Package: FC-mPGA4 (604-pin) bridge chip technology on the backplane. DUAL ETHERNET INTERFACES - 10/100/1000BASE-T: *Higher speeds as available DDR2-400 MEMORY: ® The NLT uses an internal PCI-X bus to connect the I/O Controller hub The Intel Xeon processors used on the NLT support an 800MHz system The DDR2-400 interface is a dual channel interface originating at the ® to the Ethernet controller chip. This design feature provides high-speed bus as well as the Intel NetBurst™ micro-architecture. These new Memory Controller hub with each channel terminating at two DIMM ® dual Gigabit Ethernet on LAN ports 1 and 2. The SHB also supports processors support both 64-bit and 32-bit applications. Intel Extended module sockets, for a total of four memory sockets. The NLT uses ECC ® 10Mb/s or 100Mb/s Ethernet networks. RJ-45 connectors on the Memory 64 Technology (Intel EM64T) is the processor feature that registered PC2-3200 DIMMs and supports a maximum memory I/O bracket provide the mechanical interface to the Ethernet networks. allows 64-bit application support. Other processor features: capacity of 8GB and a minimum memory interface bandwidth of • Hyper-Threading Technology 3.2GB/s per channel. The total effective memory interface bandwidth • Streaming SIMD Extensions 2 & 3 (SSE2 & SSE3) increases to 6.4GB/s when at least one PC2-3200 DIMM is used in • Hyper-Pipelined technology each of the channels. • 1M Advanced Transfer Cache (L2) (2M L2 Cache - Future) STANDARDS: • 16K Level 1 data cache (L1) TM • PCI Express Base Specification 1.0a CHIPSET: TM • SHB Express System Host Board PCI Express Specification - ® ® Increased system performance is made possible by the Intel E7520 PCI Industrial Computer Manufacturers Group (PICMG ) 1.3 chipset's ability to support an 800MHz system bus. The chipset configuration on Trenton's NLT board supports two registered DDR2-400 memory channels. Data bottlenecks are reduced by the three PCI TM Express interfaces that provide high bandwidth (4GB/s) connections Dependable, always. between the ports on the Memory Controller Hub (MCH) and external I/O devices or option cards. V ox Technologies Corporation - 1180 Commerce Drive, Richardson, Texas 75081 - www.voxtechnologies.com Telephone: + 1 - 9 72 - 234 - 4343 - Fax: + 1 - 9 72 - 234 - 429 5 - Email: info@voxtechnologies.com + 1 - 9 72 - 234 - 4343 info@voxtechnologies.com PRODUCT DATA SHEET DIMM Module Sockets ® ® Intel Intel 1B & 2B DDR-B MCH ™ ™ Channel B Xeon Xeon DDR2-400 Memory Controller Hub Processor 1 Processor 2 3200MB Bandwidth* ® Socket 604 Socket 604 Intel DIMM Module Sockets E7520 DDR-A 1A & 2A Channel A Hub Link 1.5 800MHz Front Side Bus DDR2-400 PCI Express x8 *Single Channel operations. SMBus Memory bandwidth typically doubles Edge Connectors PCI Express x8 in dual channel operations. A and B Controlled Impedance PCI Express x4 Connector Hub Link 1.5 PCI Express x4 Video PCI 32-bit/33MHz Controller Ultra XGA IOB30 LPC Bus PCI LPC ATI Monitor Optional M1 FWH I/O FirmwareHub ® Intel Board LAN 1 82802 Ethernet PCI-X Controller PCI-X 64-bit/66MHz 10/100/1000 SMBus SMBus Base-T Intel To Edge 82546EB LAN 2 Connector A IDE Serial ATA E6300ESB Primary Primary I/O Controller IDE Serial ATA Optional Hub Secondary Secondary Backplane Routing NLT Edge Connector C I/O USB 0 USB 2 Headers USB 1 USB 3 USB Ports Bracket Intel FW80001ESB ULTRA XGA INTERFACE: NLT APPLICATION CONSIDERATIONS: ADDITIONAL NLT FEATURES: ® TM TM The NLT is equipped with the third generation ATI RAGE MOBILITY Power Requirements: I/O Features: M1 video controller. The M1 enables 2D/3D video acceleration and Typical Values • Two EIDE Ultra ATA/100 interfaces provides 8MB of integrated video memory. In 2D mode the video CPU +5V +12V +3.3V • Optional IOB30 I/O plug-in expansion board includes: controller supports pixel resolutions up to 1600 x 1200, and in 3D 3.6GHz 3.75A 17.00A 3.50A - Enhanced bi-directional parallel interface mode the maximum resolution provided is 1280 x 1024. The 3.2GHz 3.75A 15.40A 3.50A - PS/2 mouse and keyboard interface (mini DIN connector) maximum color depth supported at these extremes is 16.7 million 2.8GHz* 3.75A 9.70A 3.50A - Floppy drive interface colors. Software drivers are available for popular operating systems. -12V @ <100mA - Two high-speed serial ports Tolerance for all voltages is +/- 5% Watchdog Timer: QUAD UNIVERSAL SERIAL BUS INTERFACES (USB 2.0): Temperature/Environment: • The programmable watchdog timer is supported directly by the I/O Two USB 2.0 interface ports are located on the I/O bracket of the NLT. Operating Temperature: 0˚ to 45˚ C. Controller Hub. Two operating modes, free-running and one-shot, Two additional USB 2.0 headers are available on the SHB. Ask Trenton *LV Xeon operating temperature: 0˚ to 55˚ C. are available with this two-stage watchdog timer. Stage one can about optional USB routing to the backplane via NLT edge connector C. Storage Temperature: - 40˚ to 70˚ C. generate IRQ, SMI or SCI. Stage two generates a programmable Humidity: 5% to 90% non-condensing watchdog timer reset with a total range of 1ms to 10 minutes. BIOS (FLASH): Mechanical: The stated bus speed, memory and communication interface speeds are component ® The NLT uses AMIBIOS8 ; the flash BIOS resides in the SHB's In a typical backplane, the NLT's cooling solution enables placement maximums; actual system performance may vary. Firmware Hub (FWH). AMIBIOS8 contains features such as: of option cards approximately 2.3" (58.4mm) away from the top Intel, Intel EM64T, NetBurst and Xeon are trademarks or registered trademarks of Intel component side of the SHB. The NLT's overall dimensions are Corporation. All other product names are trademarks of their respective owners. • Support for flash devices for BIOS upgrading 13.330" (33.858cm) L x 4.976" (12.639cm) H in accordance • Integrated support for USB mass storage devices such as Copyright ©2005 by TRENTON Technology Inc. All rights reserved. with the SHB Express full-length SHB dimension specification. The USB, CD-ROM, CD-RW, etc. TM SHB Express board height specification is .176" (.447cm) taller • Boot from network, USB mass storage devices, IDE or ATAPI than the PICMG 1.0 SBC height specification; however, relative • Serial port console redirection to support headless operation PICMG 1.3 SHB height off the backplane is the same due to the (requires optional IOB30, part number 6391-000) shorter PCI Express backplane connectors. • SATA/ATA/ATAPI support includes 48-bit LBA addressing to support SATA/ATA/IDE hard drive capacities over 137GB ORDERING INFORMATION: AGENCY APPROVALS: Model Name: NLT Model # CPU Speed Designed for UL60950, CAN/CSA C22.2 No. 60950-00, 6313-006-xM 3.6GHz EN55022:1998 Class B, EN61000-4-2:1995, EN61000-4-3:1997, Dependable, always. 6313-003-xM 3.2GHz EN61000-4-4:1995, EN61000-4-5:1995, EN61000-4-6:1996, 6313-501-xM 2.8GHz EN61000-4-11:1994 (xM = Memory) V ox Technologies Corporation - 1180 Commerce Drive, Richardson, Texas 75081 - www.voxtechnologies.com 8416313 05125 1.0 Telephone: + 1 - 9 72 - 234 - 4343 - Fax: + 1 - 9 72 - 234 - 429 5 - Email: info@voxtechnologies.com