PRODUCT DATA SHEET MX8 SINGLE BOARD COMPUTER +12V Connector DDR266/333/400 Memory Ultra160 SCSI Interface Floppy Drive Interface Dual USB Interfaces Dual Ultra ATA/100 Serial Ports (From ATX12V) Up to 2GB (Optional) (Rev 2.0) EIDE Interfaces Enhanced Bi-Directional Parallel Interface Dual Serial ATA/150 Interfaces PS/2 Mouse and Keyboard Interface Video Interface LAN - 10/100/1000 Base-T Ethernet Interface ® ® ® ® Intel Pentium 4 Processor PCI-X/PCI PICMG Connector Memory Controller Hub I/O Controller Hub ISA Bus ATI Video Controller AMI Flash BIOS Trenton’s MX8 represents a quantum leap in CHIPSET: 10/100/1000BASE-T ETHERNET INTERFACE (DUAL): processor, network communications and I/O ® ® The 875P chipset features Intel Performance Acceleration The MX8’s Gigabit Ethernet Controller (Intel 82547GI) uses the new ® ® ® ® ® functionality. The SBC offers new Intel Pentium Technology (Intel PAT). Intel PAT provides a faster path between Communication Streaming Architecture (CSA) feature on the Intel 4 processor options that provide faster processing the processor cache memory and DDR system memory that increases 875P MCH to provide a high-speed 10/100/1000Base-T Ethernet and system bus speeds, along with a larger cache overall system performance while taking full advantage of the interface. Connecting directly to the MCH via CSA approximately processor’s 800MHz Front Side Bus (FSB). The MX8 features a dual doubles the peak available bandwidth and provides a low-latency memory. The SBC’s chipset supports a 533/800MHz channel DDR266/333/400 memory interface, 533MHz or 800MHz path to memory that increases network performance. The second system bus, Gigabit Ethernet, PCI-X, Serial ATA ® FSB support, an AGP 3.0 video interface with 4x data transfers and 10/100/1000Base-T Ethernet interface is provided by the Intel and DDR266/333/400 memory. Combining new dual Serial ATA/150. Additional chipset capabilities include USB 2.0, 82540 PCI-based controller. RJ-45 connectors, located on the I/O ® technology with legacy system architecture support PCI-X/PCI, ATA/100, Intel Communications Streaming Architecture bracket, provide the physical interface to the Ethernet network. enables the MX8 for a wide variety of applications. (CSA) support for direct-connect Gigabit Ethernet and a 266MB/s ® BUS SPEEDS: Hub Interface to the Intel E6300ESB I/O Controller Hub. PROCESSOR: ISA * - 16-bit/8MHz DDR266/333/400 MEMORY: ® ® PCI - 32-bit/33MHz, 32-bit/66MHz Intel Pentium 4 processor at speeds of 2.4GHz to 3.4GHz* The two available DIMM sockets on the MX8 support a total memory 64-bit/33MHz, 64-bit/66MHz Processor Package: mPGA 478 capacity of 2GB. The 875P has an Intelligent Memory Manager feature PCI-X - 64-bit/33MHz, 64-bit/66MHz ® ® The latest version of the Intel Pentium 4 processor uses Intel’s that automatically detects the speed and placement of the DDR DIMMs System or FSB - 533MHz or 800MHz and applies the appropriate memory frequency and speed to the new 90 nanometer process technology to enhance processing *Contact Trenton for details on the MX8’s ISA implementation. efficiency while increasing performance and providing additional DDR266/333/400 interface. The interface can operate as either a single-channel or dual-channel DDR interface. With one DIMM installed, processor features. BIOS (FLASH): the interface operates as a single-channel interface supporting a Processor options are available to support either a 533MHz or ® ® PC2100, PC2700 or PC3200 unbuffered 184-pin ECC or non-ECC ® The MX8 uses AMIBIOS8 . The flash BIOS resides in the Intel 800MHz system bus. All processors utilize the Enhanced Intel DDR DIMM. Installing one DIMM produces an interface bandwidth 82802AC Firmware Hub (FWH). AMIBIOS8 contains features such as: ™ NetBurst micro-architecture. These processor features combine to of either 2.1GB/s, 2.7GB/s or 3.2GB/s. Dual-channel DDR interface provide optimum system performance and fast program execution in • Support for flash devices for BIOS upgrading via floppy interface operation occurs by installing two identical DIMMs, which doubles single board computer applications. Additional processor features include: • Integrated support for USB mass storage devices such as USB the interface bandwidth to 4.2GB/s, 5.4GB/s or 6.4GB/s. • Hyper-Pipelined technology CD-ROM, CD-RW, etc. SERIAL ATA/150 PORTS (DUAL): • Streaming SIMD Extensions 2 (SSE2) • Boot from network, USB mass storage devices, IDE or ATAPI • Advanced Dynamic Execution • Serial port console redirection to support headless operation The primary and secondary Serial ATA (SATA) ports on the MX8 • Hyper-Threading technology •SATA/ATA/ATAPI support includes 48-bit LBA addressing to comply with the SATA 1.0 specification and support two independent ® • Enhanced Intel SpeedStep Technology support SATA/ATA/IDE hard drive capacities over 137GB SATA storage devices such as hard disks and CD-RW devices. SATA *Higher speeds as available technology provides lower pin counts, reduced signaling voltages, simplified cabling, CRC error detection and hot-plug support. SATA CACHE MEMORY (L2 & L1): produces higher performance interfacing by providing data transfer rates up to 150MB per second on each port. The processor’s level two (L2) cache memory is an integrated on-die Advanced Transfer Cache memory that is 8-way set associative and ULTRA XGA VIDEO INTERFACE: runs at the full processor core frequency. Processor options are avail- ® able that provide either a 512K or 1M L2 cache memory. The level The ATI M6-C16H video controller enables 2D/3D video acceleration and one (L1) cache memory is a 12K Execution Trace Cache and an 8K provides 16MB of integrated video DDR memory. The video controller data cache. supports pixel resolutions up to 1600 x 1200 (UXGA). Software drivers are available for most popular operating systems. Dependable, always. TRENTON Technology Inc. • 2350 Centennial Drive, Gainesville, Georgia 30504 • Sales: (800) 875-6031 • Phone: (770) 287-3100 • Fax: (770) 287-3150 E-mail: Sales@TrentonTechnology.com • Web: www.TrentonTechnology.com PRODUCT DATA SHEET Channel 1 ADDR DIMM Module Socket 1 DDR-A MCH DDR266/333/400 ® 2100MB, Pentium 4 Memory 2700MB or DATA Processor Controller Hub 3200MB Socket 478 Bandwidth* ® Intel 875P CNTL DIMM Module Socket 2 DDR-B DDR266/333/400 Channel 2 Hub Link 1.5 CSA AGP 4X *Single channel operations. Video Memory bandwidth doubles SMBus in dual channel operations. Ultra XGA Controller Monitor ® ATI M6-C16H FWH Firmware 10/100/1000 Base-T Ethernet Hub Ethernet Hardware LAN External Controller Monitor Monitor ® Intel Port ® Winbond 82802AC Intel Hub Link W83783S 82547EI SMBus 32-bit/33MHz PCI Bus LPC Bus Super LPC PCI Mouse/ I/O Keyboard Port Speaker Header Parallel E6300ESB SCSI Ethernet Port IDE I/O Controller Controller Primary Controller Floppy ® Adaptec Intel Port Hub IDE AIC-7892 82540 Secondary Ultra160 Serial LPC-ISA Port 1 LAN Serial ATA Bridge 10/100/1000 Primary Base-T Ethernet Serial SMSC Port 2 Serial ATA LPC47B272 Winbond Ultra160 SCSI Interface Secondary W83626F ® Intel PCI/PCI-X Bus USB 0 To FW8000IESB USB 1 Backplane ISA Bus To Backplane ULTRA160 SCSI INTERFACE (OPTIONAL): MX8 APPLICATION CONSIDERATIONS: AGENCY APPROVALS: The Ultra160 SCSI interface uses an Adaptec AIC-7892 SCSI controller UL60950, CAN/CSA C22.2 No. 60950-00, EN55022:1998 Class B, Power Requirements: chip and supports SCSI device data transfer operations up to 160MB/s. EN61000-4-2:1995, EN61000-4-3:1997, EN61000-4-4:1995, Typical Values The interface supports up to 15 SCSI devices, complies with the SPI-3 EN61000-4-5:1995, EN61000-4-6:1996, EN61000-4-11:1994 PROCESSOR +5V* +12V** +3.3V* standard and is compatible with both single-ended and Low Voltage 3.0GHz 6.40A 8.80A 2.50A ORDERING INFORMATION: Differential (LVD) SCSI I/O. Software drivers are available for most 2.8GHz 4.95A 5.15A 2.50A popular operating systems. Model Name: MX8 2.4GHz 4.95A 4.63A 2.50A -12V @ <100mA ADDITIONAL MX8 FEATURES: Model # CPU Speed L2 Cache SCSI Option ® ® *From backplane via PICMG connector Pentium 4/800MHz FSB System Hardware Monitor: **From ATX12V power supply or equivalent via P24 connector 6240-410 3.4GHz 1M Yes • The Winbond W83783S chip supports hardware monitoring. 6240-408 3.0GHz 1M Yes The functions monitored are: The processor’s power requirements created the need for an 6240-430 3.4GHz 1M No - Voltage: +2.5V, +3.3V, +/-12V, +5V and VCORE additional on-board 4-pin power connector. This connector requires 6240-428 3.0GHz 1M No - Fan Speed +12V from an external power supply that conforms to the ATX12V ® - Temperature Pentium 4/533MHz FSB power specification. This external power supply should have a • The MX8 hardware monitor driver allows the user to program 6240-107 2.8GHz 512K Yes wattage rating of at least 250W. The MX8 also requires that the the monitor limits to provide a trigger point for the application 6240-104 2.4GHz 512K Yes power supply provide +3.3V to the backplane’s processor slot. software. The user’s application program can monitor these 6240-127 2.8GHz 512K No trigger points in order to send system alert messages or perform Temperature/Environment: 6240-124 2.4GHz 512K No corrective actions. Standard Operating Temperature: 0° to 45° C Standard Operating Temperature: 0° to 45° C with 250 LFM Intel, Pentium and NetBurst are trademarks or registered trademarks of Watchdog Timer: airflow (for processors with 800 MHz FSB/1M cache and 3.06GHz Intel Corporation. All other product names are trademarks of their respective owners. • The programmable watchdog timer is supported directly by the processors with 533MHz FSB/512K cache) I/O Controller Hub. Two operating modes, free-running and Copyright ©2004 by TRENTON Technology Inc. All rights reserved. one-shot, are available with this two-stage watchdog timer. Extended Operating Temperature: 0° to 55° C Stage one can generate IRQ, SMI or SCI, and stage two generates Storage Temperature: -40° to 70° C a programable watchdog timer reset with a total range of 1ms Humidity: 5% to 90% non-condensing to 10 minutes. ® ® The high-performance Intel Pentium 4 processor used on the I/O Features: MX8 may consume over 100Watts of power. The MX8’s cooling •Two high-speed serial ports system uses a high-reliability fan mounted to the SBC. •Enhanced Bi-Directional parallel interface Mechanical: • Dual Universal Serial Bus (USB, Rev. 2.0) An active cooling system is used on the MX8 to insure reliable processor • PS/2 mouse/keyboard interface operation at elevated temperatures. Overall dimensions for the MX8, • Floppy drive interface Dependable, always. including the active cooling system, are 13.3” L (338mm) x 4.8” H STANDARDS: (121.9mm) x 2.35” W (59.7mm). Trenton validates extended temper- ature operation for processor speeds 2.8GHz and below using a 2.35” • PCI Local Bus Specification 2.1 (59.7mm) tall active cooling system. Consult Trenton for details. ® • PICMG 1.0 Specification TRENTON Technology Inc. • 2350 Centennial Drive, Gainesville, Georgia 30504 • Sales: (800) 875-6031 • Phone: (770) 287-3100 • Fax: (770) 287-3150 E-mail: Sales@TrentonTechnology.com • Web: www.TrentonTechnology.com 8416240 04054 1.0