DATA SHEET ® Tellabs 7100 Optical Transport System: Fully Integrated Transport and Services Delivery Platform Advanced packet-optical transport system to reduce total cost of ownership and increase revenue. Overview ® The Tellabs 7100 Optical Transport System combines the most advanced optical networking and services layer technologies on one seamless packet-optical transport platform. Supporting up to 88 channels, with interfaces ranging from 100 Mbps to 40 Gbps, the Tellabs 7100 OTS offers you the scalability, service flexibility and cost effectiveness that enable true next-generation transport networking. The Tellabs 7100 OTS features an integrated dynamic optical core and intelligent services interfaces that together deliver Add/ Drop Multiplexer (ADM) capability, Layer 2 packet switching on a single blade, and OTN multiplexing and switching. Dynamic optical networking enables you to meet today’s network needs while supporting the ability to effortlessly deploy additional nodes for future expansion via a multi-degree Reconfigurable Optical ADM (ROADM) and optical switching technologies. One of the intelligent services interfaces mimics currently installed ADM rings with a simple pair of modules, eliminating the costly implementation of stacked ADM rings. Coupled with software-configurable ports supporting SONET/SDH, Ethernet and Storage Area Network (SAN) interfaces, the Tellabs 7100 OTS supports the service flexibility required in today’s rapidly evolving networks. The Tellabs 7100 OTS not only addresses traditional network The Tellabs 7100 OTS requirements in a cost-effective, efficient manner, but also supports strategic deployment of native packet-based solutions. Ethernet n ASON/GMPLS control plane for connection management and modules support efficient packet aggregation switching and service mesh restoration delivery while enabling cost-effective transport of IP. The Tellabs ® n Managed by Tellabs 8000 Intelligent Network Manager 7100 OTS offers a single, flexible platform that can support current ADM Wavelength Division Multiplexing (WDM) ring capabilities and packet-based services over mesh networks. Features that Deliver Immediate and Future Benefits Leveraging the many advantages of OTN technology solutions over traditional SONET/SDH, the Tellabs 7100 OTS also supports Increased Network Flexibility and Service Delivery OTN multiplexing and switching. It can transparently carry many The Tellabs 7100 OTS overcomes the shortcomings of point-to-point services, like native video signals, which may be corrupted when Wavelength Division Multiplexer (DWDM) systems by introducing a carried over SONET/SDH. The OTN also transparently carries multi-degree ROADM architecture based on Wavelength Selective SONET/SDH links, preserving the SONET/SDH OAM and protection Switching (WSS) technology. This architecture simplifies network schemes for existing topologies or customer circuits. engineering, solves the stranded capacity issues that can occur as a result of channel banding and eliminates re-engineering to n Integrated Multiservice Provisioning Platform (MSPP), Multiservice accommodate moves and changes. Transport Switch (MSTS), Layer 2 switch, and Optical Cross Connect (OXC) n Multiservice 100 Mbps through 40 Gbps interfaces with a seamless migration to 100 Gbps interfaces See tellabs.com for more information about Tellabs Solutions ® 2 TELLABS 7100 OPTICAL TRANSPORT SYSTEM Simplified Engineering & Planning network elements, transponders that tune across 88 different channels and an intelligent transport control plane, the Tellabs 7100 New services can be added on a “point and click” basis through OTS offers significantly lower operational costs. the Tellabs 8000 intelligent manager, enabling rapid service rollout ® and the quick addition of new revenue streams. Using the Tellabs The ADM on a single blade functionality of the 7100 OTS 7196 Optical Subnet Planner, both initial network design and future means that a separate ADM no longer needs to be installed and additions of new services can be easily planned and implemented. provisioned, shrinking both costs and physical footprint. Utilizing The planning tool can also be used to perform “what if” scenarios the packet interface module means that a standalone switch is no ahead of time, giving the network planner greater confidence that longer needed to support packet aggregation, switching and service the most cost-effective solution will be deployed from the outset. delivery. Line side interfaces on point-to-point, ADM and packet modules are all DWDM channels into the ROADM for maximum The Tellabs 7100 OTS supports hitless migration from a low-cost utilization of transport fibers. Optical Line Amplifier (OLA) node to a full add/drop system. OLA nodes can be placed in a span either to extend the span length or to These savings grow significantly when a common TDM/packet provide a low-cost method of pre-positioning for future traffic growth. switch fabric is deployed to inter-connect traffic across multiple Expansion of an OLA node to a full add/drop system is accomplished interface modules, eliminating the need for a separate cross-connect by simply adding a ROADM module and output amplifier for each of element or switch. For nodes in which there is less traffic demand, the two fiber directions of the node. The addition of new shelves at ® TM the Tellabs 7100 Nano Optical Transport System (OTS) offers existing nodes to support greater add/drop capacity and the addition a low-cost alternative that fits into the same architecture and uses of new nodes to a network can both be accomplished without the same interface modules. Extensive use of pluggable interface impacting existing traffic. All of these features contribute to the transceivers (SFPs and XFPs) further reinforce the “pay as you tremendous flexibility and scalability of the Tellabs 7100 OTS. grow” architecture of the Tellabs 7100 OTS product family. CapEx/OpEx Savings Most important is the significant capital and operational savings that are achievable with the Tellabs 7100 OTS. With the use of ROADM Access Metro Regional/Long Haul NMS/OSS 7100 7100 NANO NANO 7100 Enterprise 8000 INM Network 7100 7100 7100 NANO NANO Caching Server Broadcast 7100 Video Content VoD Server NANO 7100 7100 Residential Broadband VoIP SIP Server ISP Media Gateway 7100 NANO 7325 Ethernet Mobile 7100 Backhaul 7345 PSTN/Mobile 7345 The Tellabs 7100 OTS seamlessly integrates ADM and Layer 2 functionality onto a single unified optical transport platform See tellabs.com for more information about Tellabs Solutions ® 3 TELLABS 7100 OPTICAL TRANSPORT SYSTEM Interfaces Management & Planning Key Applications n n 100BaseFX Dynamic control plane for connection n Metro/Regional packet-optical transport management and protection n OC3, OC12, OC48, OC192, OC768 n Residential triple play services aggregation ® n Tellabs 8000 Intelligent Network Manager n STM-1, STM-4, STM-16, STM-64, STM- n Mobile backhaul for 2G/3G/4G ® n 256 Tellabs 7191 Craft Station n Business and enterprise services transport ® n n ESCON/SBCON, FC/2, FC/4, FC/8 Tellabs 7196 Optical Subnet Planning tool & delivery n DVB-ASI n Next generation ADM for SONET/SDH Certifications n transport 1G/2G/4G/10G FC, 1G/2G FICON, 1G/2G n MEF9 and MEF14 certified for EPL, EVPL ISC n Digital cross-connect for aggregation and and E-LAN service delivery n grooming of TDM traffic 1 GbE, 10 GbE (LAN/WAN) n SAN: Brocade certified, EMC qualified, n n Layer 2 aggregation and switching for OTU1, OTU2, OTU3 IBM qualified optimized Ethernet and IP service delivery n Any generic rate 100 Mbps to 3.4 Gbps n All-optical cross connect n SD-SDI, HD-SDI, Dual Link, 3G-SDI Physical n Data Center connectivity Network n Shelf Dimension: n OTN multiplexing and switching for – 600 x 475 x 300mm, tunneling of all services Network or 19.5 x 18.7 x 12 inches (W x H x D) n Up to 88 wavelengths at 10 Gbps and 40 n Power: -48 V DC nominal (-40 V DC to Gbps Key Technical Features n – 75 V DC) voltage Up to eight degree ROADM Topologies n All-optical pass-through for transit n Ring Environmental wavelengths n n Multi-ring interconnect Operating Temperature: 5° C to 40° C n Cost optimized variable gain amplifier (41° F to 104° F) normal; -5° C to 50° C n options for different fiber span losses and Mesh (23° F to 122° F) temporary distances n Linear add/drop n Relative Humidity: 5%–85%, non- n Transponders widely tunable across entire condensing 88 waves n Multiple protection & restoration options North America Asia Pacific Europe, Middle East & Africa Latin America & Caribbean Tellabs Tellabs Tellabs Tellabs 1415 West Diehl Road 3 Anson Road Abbey Place Rua James Joule No. 92 Naperville, IL 60563 #14–01 Springleaf Tower 24–28 Easton Street EDIFÍCIO PLAZA I U.S.A. Singapore 079909 High Wycombe, Bucks São Paulo – SP +1 630 798 8800 Republic of Singapore HP11 1NT 04576-080 Fax: +1 630 798 2000 +65 6215 6411 United Kingdom Brasil Fax: +65 6215 6422 +44 871 574 7000 +55 11 3572 6200 Fax: +44 871 574 7151 Fax: +55 11 3572 6225 ® ® ® ® The following trademarks and service marks are owned by Tellabs Operations, Inc., or its affiliates in the United States and/or in other countries: TELLABS , TELLABS and T symbol , T symbol , and SMARTCORE . Statements herein may contain projections or other forward-looking statements regarding future events, products, features, technology and resulting commercial or technological benefits and advantages. These statements are for discussion purposes only, are subject to change and are not to be construed as instructions, product specifications, guarantees or warranties. Actual results may differ materially. The information contained herein is not a commitment, promise or legal obligation to deliver any material, code, feature or functionality. It is intended to outline Tellabs’ general product direction. The development, release and timing of any material, code, feature or functionality described herein remains at Tellabs’ sole discretion. © 2011 Tellabs. All rights reserved. 74.1693E Rev H 06/11