TRANSMITTER COMBINERS 1 TRANSMITTER COMBINERS 30 - 88 MHz LOWBAND COMBINERS 1 Telewave Lowband and Midband Combiners offer high performance with industry-standard Telewave reliability. Telewave is one of the few remaining manufacturers of full size, high-”Q” cavity filters between 30 and 88 MHz. These filters can be deployed in a number of configurations for low band combining and receiver filtering. The M101-030-5T8R series uses 16 cavities to combine 5 transmitters in the 37 MHz band and 8 receivers between 47-49 MHz, with transmitter spacing of only 100 KHz. Telewave has also designed a unique system to combine 2 transmitters in the 45 MHz band with 100 KHz separation, which employs custom designed Telewave hybrid couplers and a dual-cavity sideband filter. Lowband systems present a number of operational challenges, but Telewave has the tools to custom design a complete filtering system for any requirement. M101-030-5T8R All specifications subject Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 5 TWDS-1010 Rev. 8/09 148 - 170 MHz M104-150-4TPC 4 CHANNEL LOW LOSS COMBINER The M104-150-4TPC Low Loss VHF Combiner offers the same high performance as our standard low loss combiners, in a much smaller package. State of the art technology allows us to create one of the world's smallest low loss combiners. The M104-150-4TPC combines up to 4 channels per unit, with 300 M104-150-4TPC Combiner Unit KHz separation, in only 8.75" of standard rack space. The modular combining units can be grouped for TPMC-1543 up to 16 channels to accommodate system expansion. The optional receiver system utilizes the Telewave TPMC-1543 multicoupler for enhanced receiver performance, and distribution to 4 receivers. M104-150-4TPC in 19” rack SPECIFICATIONS Frequency range 148-170 MHz Channels 1-4 channels into 1 antenna Channel separation (min) 300 KHz Input power (max) 100 watts per channel Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 Insertion loss per ch. (typ.) 3.4 dB - 4 ch. at 300 KHz spacing TX-to-TX isolation (typ.) 75 dB Antenna to TX isolation (typ.) 70 dB 2nd harmonic suppression (typ.) 90 dB Cavity size 4” square / 1/4 wave Operating temperature -30°C to +60°C Mounting / Connectors 19” rack mount / N Female Panel dimensions (HWD) in. / cm 8.75 x 19 x 12.5 (21.6 x 48.3 x 31.75) Weight lb. (kg) 32 (14.5) All specifications subject 6 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice TWDS-1023 Rev. 7/09 TRANSMITTER COMBINERS 148 - 174 MHz M108-150-TRM SERIES 1 LOW LOSS VHF COMBINER The M108-150-TRM series uses up to ten 8”, high “Q” low-loss cavities mounted on a standard EIA 19” x 72” rack. These combiners are available in a vertical or horizontal configuration, depending on customer requirements. Up to 8 cavities can be mounted vertically in two groups, or up to 10 cavities can be mounted horizontally on two 5-channel panels. The vertical configuration is useful for installation in limited space or direct wall mounting. Each cavity also contains internal support for the tuner assembly specifically to enable horizontal mounting. Optional power monitoring for each channel is available, as well as remote keying for each transmitter. The PM10C2S-1C wattmeter panel uses only 1.75” of rack space. An optional receiver system can be M108-150-5TRM built around the Telewave compact M108-150-8TRM with preselector, power vertical mounting monitoring, and RX panel preselector series, or full-size cavities as needed. Depending on SPECIFICATIONS the application, the TPCP-1544C Frequency range 148-174 MHz or TPCP-1556 preselector may be mounted in the upper portion Channels 1-10 channels into 1 or 2 antennas of a 72” or 84” rack, along with Channel separation (min) 125 KHz a 1RU receiver panel for up to 16 Input power (std. / opt.) 100 / 150 watts per channel channels. Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 As frequency “re-farming” Insertion loss per ch. (typ.) 3.25 dB - 5 ch. at 250 KHz spacing continues, and new narrowband 4.0 dB - 5 ch. at 150 KHz spacing channel assignments become TX-to-TX isolation (typ.) 75 dB more common, channel spacing Antenna to TX isolation (typ.) 70 dB is even more critical. The M108- 2nd harmonic suppression (typ.) 90 dB 150-TRM series allows operators of high-density VHF systems to Cavity size 8” diameter / 1/4 wave take advantage of new technology, Operating temperature -30°C to +60°C while preserving and enhancing Mounting / Connectors 19” rack mount / N Female the performance of existing Panel dimensions (HWD) in. / cm 24.5 x 19 x 26 / 62 x 48.3 x 66 equipment. Weight lb. (kg) 150 (68.1) 5 ch. All specifications subject Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 7 TWDS-1029 Rev. 7/09 148 - 174 MHz M101-150-8TRM19 LOW LOSS VHF COMBINER FOR CLOSE SPACING The M101-150-8TRM19 uses up As frequency “re-farming” to eight 10”, high “Q” low-loss continues, and new narrowband cavities mounted on a standard channel assignments become EIA 19” x 72” rack. This combiner more common, isolation between provides as much as 75 dB isolation close-spaced channels is even more for each transmitter, with spacing critical. The M101-150-8TRM19 as close as 105 KHz. Each channel allows operators of high-density has a separate isolator with 60 Watt VHF systems to take advantage of load (standard), and all tuning is new technology, while preserving accessible from the front panel. and enhancing the performance of existing equipment. Optional power monitoring for each channel is available, as well as remote keying for each transmitter. The PM10C2S-1C wattmeter panel uses only 1.75” of rack space. The optional receiver system is built around the Telewave compact preselector series. Depending on the application, the TPCP-1544C or 1546C preselector may be integrated directly into the upper portion of the M101-150 84” rack. The 1RU receiver panel also mounts straight into the rack, preserving valuable site floor space. SPECIFICATIONS Frequency range 148-174 MHz OPTIONAL 100 WATT Channels 1-8 channels into 1 or 2 antennas LOADS SHOWN Channel separation (min) 105 KHz Input power (std. / opt.) 100 / 150 watts per channel Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 Insertion loss per ch. (typ.) 3.0 dB - 5 ch. at 250 KHz spacing 3.8 dB - 5 ch. at 150 KHz spacing TX-to-TX isolation (typ.) 75 dB Antenna to TX isolation (typ.) 70 dB 2nd harmonic suppression (typ.) 90 dB Cavity size 10” diameter / 1/4 wave Operating temperature -30°C to +60°C Mounting / Connectors 19” rack mount / N Female Rack dimensions (HWD) in. (cm) 84 x 20 x 26 (214 x 51 x 66) Weight lb. (kg) 250 (113.5) All specifications subject 8 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice TWDS-1011 Rev. 7/09 TRANSMITTER COMBINERS 148 - 174 MHz M101-150-8TRM 1 LOW LOSS VHF COMBINER The Telewave M101-150 Low Loss FEATURES VHF Combiner is a unique, fully self- • ALL TUNING FROM FRONT contained transmitter and receiver • 8 TRANSMITTERS INTO combining system. The custom ONE ANTENNA welded 24” steel frame provides a rugged enclosure for all system • UP TO 64 RECEIVERS FROM components. This integrated ONE ANTENNA design allows channels to be added, • SELF-CONTAINED, BUILDING retuned, or removed in the field at BLOCK CONCEPT any time, without disrupting other • LESS THAN 3 dB INSERTION active channels. The standard 24” LOSS WITH PROPER x 48” rack handles up to 8 channels FREQUENCY SELECTION and 1 or 2 antennas. • ALL CONNECTIONS AT 10-inch High-”Q” cavities with dual TOP OF RACK isolators provide 75 dB isolation • 75 dB TX TO TX PROTECTION between channels, and the optional receiver panel can drive as many as • 130 dB RX INTERMOD 64 receivers from a single antenna. PROTECTION WITH RX PNL. The PM8C2S wattmeter panel • RF POWER MONITORING allows forward or reverse power FOR ALL CHANNELS AND monitoring for each channel, or ANTENNA total power to each antenna. Up • REMOTE TX KEYING to 8 transmitters can be remotely • FIELD TUNABLE keyed with front panel switches. All components in this system are passive, except the optional receiver amplifier. SPECIFICATIONS Frequency range 148-174 MHz Channels 1-8 channels into 1 or 2 antennas Channel separation (min) 105 KHz Input power (std. / opt.) 100 / 150 watts per channel Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 Insertion loss per ch. (typ.) 3.0 dB - 5 ch. at 250 KHz spacing 3.8 dB - 5 ch. at 150 KHz spacing TX-to-TX isolation (typ.) 75 dB Antenna to TX isolation (typ.) 70 dB 2nd harmonic suppression (typ.) 90 dB Cavity size 10” diameter / 1/4 wave Operating temperature -30°C to +60°C Mounting / Connectors 24” rack mount / N Female Rack dimensions (HWD) in. (cm) 48 x 24 x 31 (122 x 61 x 79) Weight lb. (kg) 250 (113.5) All specifications subject Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 9 TWDS-1014 Rev. 7/09 400 - 512 MHz M106-450-4/8TPC COMPACT TRANSMITTER COMBINER PANELS The Telewave M106-450-4TPC and FEATURES 8TPC Compact Low Loss Combiner • ULTRA COMPACT - Panels are designed for new, 4 CH. ONLY 12.25" HIGH narrow-band technologies. Six-inch • 1-8 TRANSMITTERS INTO ONE diameter high “Q” cavities and ANTENNA horizontal mounting dual isolators • LESS THAN 3 dB provide high performance in only INSERTION LOSS (4 CH.) 7RU (12.25”). • MODULAR PANELS All components in these field- SIMPLIFY EXPANSION expandable combiners are • COMPLETELY SELF- completely passive. This design CONTAINED allows for front panel tuning, • LOW COST PER CHANNEL simplif ing ins tallation and maintenance, and allows for • FULLY FIELD TUNABLE addition of channels without any • 80 dB TX TO TX PROTECTION disruption of service. These combiners are shipped without racks, for mounting in existing installations. MAJOR OPTIONS • HEAVY DUTY 19” RACKS • POWER MONITORING • WATTMETER PANEL • RECEIVER MULTICOUPLER SPECIFICATIONS - COMBINER • EXPANSION KITS TO 8 CHANNELS (M106-450-1T) Frequency range 400-512 MHz Channels 1-8 channels into 1 or 2 antennas Channel separation (min) 300 KHz Input power (max) 150 watts per channel Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 Insertion loss per ch. (typ.) 2.9 dB - 4 ch. at 300 KHz spacing 3.4 dB - 8 ch. at 300 KHz spacing TX-to-TX isolation (typ.) 80 dB Antenna to TX isolation (typ.) 75 dB 2nd harmonic suppression (typ.) 90 dB Cavity size 6” diameter / 1/4 wave Operating temperature -30°C to +60°C Mounting / Connectors 19” rack mount / N Female Panel dimensions (HWD) in. (cm) 12.25 x 19 x 17 (31.1 x 48.3 x 43.2) Weight lb. (kg) 4 ch. 60 (27.2) All specifications subject 10 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice TWDS-1031 Rev. 7/09 TRANSMITTER COMBINERS 200 - 512 MHz M107-250-TP 200-300 MHz M107-350-TP 300-400 MHz M107-450-TP 400-512 MHz M107-250, 350, 450 TP SERIES 1 LOW LOSS TRANSMITTER COMBINER PANELS Telewave M107-250, -350, and FEATURES -450 Low Loss Combiner panels • ALL TUNING FROM are designed for new, narrow-band THE FRONT technologies. • 4 OR 6 CHANNELS PER PANEL All components in these field- INTO ONE ANTENNA expandable combiners are • LESS THAN 3 dB INSERTION completely passive. This design LOSS allows front panel tuning, simplifies • MODULAR PANELS SIMPLIFY installation and maintenance, and EX PAN SION allows for addition of channels • LOW COST PER CHANNEL without any disruption of service. • FULLY FIELD TUN ABLE Each panel fits a standard 19” rack, • 80 dB TX TO TX PROTECTION and allows up to 4 or 6 channels. Additional channels can be added M107 TP 4 to a panel without disrupting CHANNELS existing users. These combiners are shipped without racks, for mounting in existing installations. The actual height and depth of each panel can vary with frequency. Lower frequencies require longer cavities. SPECIFICATIONS Frequency ranges 200-512 MHz Channels 4 or 6 channels into one antenna Channel separation (min) 250 KHz Input power (std. / opt.) 100 / 150 watts per channel Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 Insertion loss per ch. (typ.) 3.25 dB at 275 KHz spacing TX-to-TX isolation (typ.) 80 dB Antenna to TX isolation (typ.) 75 dB M107 TP 6 CHANNELS 2nd harmonic suppression (typ.) 90 dB Cavity size 7” diameter / 1/4 wave Operating temperature -30°C to +60°C Mounting / Connectors 19” rack mount / N Female Panel dim. typ. (HWD) in. (cm) 4 ch. 17.5 x 19 x 26 (44.5 x 48.3 x 66) (Panel height varies with freq.) 6 ch. 24.5 x 19 x 26 (62.2 x 48.3 x 66) Weight lb. (kg) 4 ch. 42 (19.1) / 6 ch. 58 (26.3) All specifications subject Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 11 TWDS-1007 Rev. 7/09 200 - 512 MHz M107-250-8TRM 200-300 MHz M107-350-8TRM 300-400 MHz M107-450-8TRM 400-512 MHz M107-250, 350, 450 TRM SERIES EXPANDABLE LOW LOSS TRANSMITTER COMBINERS Telewave M107-250, -350, and FEATURES -450 Low Loss Combiners are • ALL TUNING FROM designed for new, narrow-band THE FRONT technologies. All components in • UP TO 14 TRANSMITTERS these field-expandable combiners INTO ONE ANTENNA are completely passive, with the • LESS THAN 3 dB exception of the optional solid-state INSERTION LOSS receiver distribution amplifier. The • ALL CONNECTIONS AT compact layout is enclosed in a TOP OF RACK rugged steel frame. • COMPLETELY SELF Optional power monitoring for CONTAINED each channel is available, as well as • LOW COST PER CHANNEL remote keying for each transmitter. The PM10C2S-1C wattmeter panel • FULLY FIELD TUNABLE uses only 1.75” of rack space. • 80 dB TX TO TX PROTECTION An optional receiver system can be built around the Telewave To meet international require- compact preselector series, or full- ments, special configurations and size cavities as needed. Depending expansion kits are available. A Pass- on the application, a 4 or 6 cavity Reject duplexer, and Pass-Cavity preselector are also available. compact preselector may be mounted in the upper portion of a 72” or 84” rack, and a 1RU receiver panel with 8 or 16 channels. SPECIFICATIONS Frequency ranges 200-512 MHz Channels 1-14 channels into 1 or 2 antennas Channel separation (min) 250 KHz Input power (std. / opt.) 100 / 150 watts per channel Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 Insertion loss per ch. (typ.) 3.25 dB at 275 KHz spacing Shown with Optional Receiver TX-to-TX isolation (typ.) 80 dB Distribution Panel Antenna to TX isolation (typ.) 75 dB 2nd harmonic suppression (typ.) 90 dB Cavity size 7” diameter / 1/4 wave Operating temperature -30°C to +60°C Mounting / Connectors 19” rack mount / N Female 72 x 20 x 26 (183 x 51 x 66) Rack dimensions (HWD) in. (cm) (Depth varies with frequency) Weight lb. (kg) 200 (91) All specifications subject 12 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice TWDS-1001 Rev. 7/09 TRANSMITTER COMBINERS 400 - 512 MHz M108-450-TRM SERIES 1 LOW LOSS UHF COMBINER The M108-450-TRM series uses up to ten 8”, high “Q” low-loss cavities mounted on a standard EIA 19” x 72” rack. Optional power monitoring for each channel is available, as well as remote keying for each transmitter. The PM10C2S- 1C wattmeter panel uses only 1.75” of rack space. An optional receiver system can be built around a Telewave UHF preselector. Depending on the application, the TPCP-4544 or TPCP-4546 preselector may be mounted in the upper portion of a 72” or 84” rack, and a 1RU receiver panel with 8 or 16 channels. With new narrowband channel M108-450-5TRM with preselector, power assignments, channel spacing monitoring, and RX panel is even more critical. The M108- 450-TRM series allows operators of high-density UHF systems to take advantage of new technology, while preserving and enhancing the performance of existing equipment. SPECIFICATIONS Frequency range 400-512 MHz Channels 1-10 channels into 1 or 2 antennas Channel separation (min) 250 KHz Input power (max) 150 watts per channel Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 Insertion loss per ch. (typ.) 3.5 dB - 5 ch. at 250 KHz spacing TX-to-TX isolation (typ.) 80 dB Antenna to TX isolation (typ.) 75 dB 2nd harmonic suppression (typ.) 90 dB Cavity size 8” diameter / 1/4 wave Operating temperature -30°C to +60°C Mounting / Connectors 19” rack mount / N Female Panel dimensions (HWD) in. (cm) 24.5 x 19 x 14 (62 x 48.3 x 35.6) Weight lb. (kg) 150 (68.1) 5 ch. All specifications subject Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 13 TWDS-1036 Rev. 7/09 400 - 512 MHz M108-450-TRM3Q SERIES LOW LOSS UHF COMBINER The M108-450-TRM3Q series uses up to ten 8-inch, high “Q” 3/4-wave low-loss cavities mounted on a standard EIA 19” x 72” rack. These combiners are available in a vertical or horizontal configuration, d e p e n d i n g o n c u s t o m e r requirements. Up to 8 cavities can be mounted vertically in two groups, or up to 10 cavities can be mounted horizontally on two 5-channel panels. The vertical configuration is useful for installation in limited space or direct wall mounting. Each cavity also contains internal support for the tuner assembly specifically to enable horizontal mounting. Optional power monitoring for each channel is available, as well as remote keying for each transmitter. The PM10C2S-1C wattmeter panel uses only 1.75” of rack space. An optional receiver system can M108-450-5TRM3Q be built around the Telewave M108-450-8TRM3Q with preselector, power vertical mounting compact preselector series, or full- monitoring, and RX panel size cavities as needed. Depending SPECIFICATIONS on the application, the TPCP-4544 or TPCP-4546 preselector may be Frequency ranges 400-512 MHz mounted in the upper portion of a Channels 1-10 channels into 1 or 2 antennas 72” or 84” rack, and a 1RU receiver Channel separation (min) 175 KHz panel with 8 or 16 channels. Input power (max) 150 watts per channel As new narrowband channel Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 assignments become more common, Insertion loss per ch. (typ.) 3.6 dB - 5 ch. at 200 KHz spacing channel spacing is even more TX-to-TX isolation (typ.) 80 dB critical. The M108-450-TRM series Antenna to TX isolation (typ.) 75 dB allows operators of high-density 2nd harmonic suppression (typ.) 90 dB UHF systems to take advantage of new technology, while preserving Cavity size 8” diameter / 3/4 wave and enhancing the performance of Operating temperature -30°C to +60°C existing equipment. Mounting / Connectors 19” rack mount / N Female Panel dimensions (HWD) in. (cm) 24.5 x 19 x 26 (62 x 48.3 x 66) Weight lb. (kg) 150 (68.1) 5 ch. All specifications subject 14 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice TWDS-1037 Rev. 07/09 TRANSMITTER COMBINERS 400 - 512 MHz M101450-TRM193Q SERIES 1 LOW LOSS UHF COMBINER FOR CLOSE SPACING The M101450-8TRM193Q is a high portion of the M101450 84” rack. power, high capacity UHF combining A 1RU receiver panel with 8 or 16 system. The system combines up to channels also mounts straight into eight transmitters using 10-inch, the rack, preserving valuable site high “Q”, 3/4 -wave low-loss cavities floor space. mounted on a standard EIA 19” x As frequency “re-farming” 72” rack. This new design provides continues, and new narrowband as much as 75 dB isolation for each channel assignments become more transmitter, with spacing as close as common, channel spacing will be 175 KHz. Each channel has a even more critical. The M101450- separate dual isolator, and all tuning 8TRM193Q allows operators of is accessible from the front panel. high-density UHF systems to take Optional power monitoring for advantage of new technology, each channel is available, as well as while preserving and enhancing remote keying for each transmitter. the performance of existing The PM10C2S-1C metering panel equipment. uses only 1.75” of vertical rack space. The optional receiver system is built around Telewave UHF preselectors. Depending on the application, the TPCP-4544, 4546, or 4548 preselector may be integrated directly into the upper OPTIONAL 100 WATT SPECIFICATIONS LOADS SHOWN Frequency range 400-512 MHz Channels 1-8 channels into 1 or 2 antennas Channel separation (min) 175 KHz Input power (max) 150 watts per channel Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 Insertion loss per ch. (typ.) 3.25 dB - 5 ch. at 250 KHz spacing 3.75 dB - 5 ch. at 200 KHz spacing TX-to-TX isolation (typ.) 80 dB Antenna to TX isolation (typ.) 75 dB 2nd harmonic suppression (typ.) 90 dB Cavity size 10” diameter / 3/4 wave Operating temperature -30°C to +60°C Mounting / Connectors 19” rack mount / N Female Rack dimensions (HWD) in. (cm) 84 x 20 x 26 (214 x 51 x 66) Weight lb. (kg) 250 (113.5) All specifications subject Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 15 TWDS-1020 Rev. 7/09 400 - 512 MHz M101-450-8TRM LOW LOSS UHF COMBINER The Telewave M101-450 Low Loss FEATURES UHF Combiner is a unique, fully self- • ALL TUNING FROM FRONT contained transmitter and receiver • 8 TRANSMITTERS INTO combining system. The custom ONE ANTENNA welded 24” steel frame provides • UP TO 64 RECEIVERS FROM a rugged enclosure for all system ONE ANTENNA components. This integrated design allows channels to be added, • SELF-CONTAINED, BUILDING retuned, or removed in the field at BLOCK CONCEPT any time, without disrupting other • LESS THAN 3 dB INSERTION active channels. The standard 24” LOSS WITH PROPER x 48” rack handles up to 8 channels FREQUENCY SELECTION and 1 or 2 antennas. • ALL CONNECTIONS AT TOP OF RACK 10-inch High -”Q” cavities with dual • 80 dB TX TO TX PROTECTION isolators provide 80 dB isolation between channels, and the optional • 130 dB RX INTERMOD receiver panel can drive as many as PROTECTION WITH RX PNL. 64 receivers from a single antenna. • RF POWER MONITORING The PM8C2S wattmeter panel FOR ALL CHANNELS AND allows forward or reverse power ANTENNA monitoring for each channel, or • REMOTE TX KEYING total power to each antenna. Up • FIELD TUNABLE to 8 transmitters can be remotely M101-450-8TRM-8R (with optional preselector keyed with front panel switches. and receiver panel) All components in this system are passive, except the optional receiver amplifier. SPECIFICATIONS Frequency range 400-512 MHz Channels 1-8 channels into 1 or 2 antennas Channel separation (min) 250 KHz Input power (max) 150 watts per channel Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 Insertion loss per ch. (typ.) 2.8 dB at 275 KHz spacing TX-to-TX isolation (typ.) 80 dB Antenna to TX isolation (typ.) 75 dB 2nd harmonic suppression (typ.) 90 dB Cavity size 10” diameter / 1/4 wave Operating temperature -30°C to +60°C Mounting / Connectors 24” rack mount / N Female Dimensions (HWD) in. (cm) 48 x 24 x 24 (122 x 61 x 61) Weight lb. (kg) 150 (68.1) All specifications subject 16 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice TWDS-1016 Rev. 7/09 TRANSMITTER COMBINERS 746 - 806 MHz 800 - 869 MHz M108-760-10TRM3Q 1 LOW LOSS 700-800 MHz COMBINER The Telewave M108-760-TRM An optional receiver system can transmitter combiner covers be built around the Telewave 746-806 and 800-869 MHz. This compact preselector series, or full- combiner features 8-inch, 3/4-wave size cavities as needed. Depending cavities for close channel spacing, on the application, the TPCP-7644 and allows 700 and 800 MHz preselector may be mounted in the channels to be provisioned in the upper portion of a 72” or 84” rack, same rack. and a 1RU receiver panel with 8 or 16 channels. Each combiner covers a single band, and is a modular unit on a The release of 760 MHz spectrum 24.5-inch panel. Each 19-inch rack provides system operators with new combines up 10 channels into a channels for capacity expansion. common antenna, with optional The M108-760-TRM3Q series duplexer, preselector, and receiver allows operators to flexibly deploy distribution. Individual channels spectrum resources in both bands, are field-replaceable within the at new or existing sites. applicable band without causing downtime to other channels. Optional power monitoring for each channel is available, as well as remote keying for each transmitter. The PM10C2S-1C wattmeter panel uses only 1.75” of rack space. SPECIFICATIONS Frequency ranges 746-806, 800-869 MHz Channels 1-10 channels into 1 or 2 antennas Channel separation (min) 250 KHz Input power (max) 150 watts per channel Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 Insertion loss per ch. (typ.) 4.25 dB - 5 ch. at 250 KHz spacing 4.8 dB - 10 ch. at 250 KHz spacing TX-to-TX isolation (typ.) 80 dB Antenna to TX isolation (typ.) 75 dB 2nd harmonic suppression (typ.) 90 dB Cavity size 8” diameter / 3/4 wave Operating temperature -30°C to +60°C Mounting / Connectors 19” rack mount / N Female Panel dimensions (HWD) in. (cm) 24.5 x 19 x 16 (62 x 48.3 x 40.6) Weight lb. (kg) 150 (68.1) All specifications subject Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 17 TWDS-1034 Rev. 7/09 851 - 869 MHz M106-860-5TP/10TP COMPACT EXPANDABLE TRUNKING COMBINER PANELS The Telewave M106-860 Compact The advanced mechanical design Trunking Combiner is the industry of Telewave high “Q” cavities leader for excellence in low-loss assures maximum long-term system combiner technology. performance. The completely passive combining Heavy duty 19” racks, duplexers, technique with front panel tuning and receiver multicoupler systems access simplifies installation and are available as upgrades. maintenance, and allows for the addition of new channels without CLOSE-UP OF REAR PANEL (10 CH.) any disruption of service. Each combiner panel is field expandable up to five channels. Additional pre-tuned combiner panels can be added at any time. (Rack not included) Valuable site space is conserved when using efficient Telewave combiners. The modular building-block construction means no specialized test equipment is required. SPECIFICATIONS Frequency range 851-869 MHz Channels 1-10 channels into 1 or 2 antennas Channel separation (min) 500 KHz Input power (max) 100 watts per channel Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 Insertion loss per ch. (typ.) 2.0 dB - 5 ch. at 1 MHz spacing 3.2 dB - 10 ch. at 500 KHz spacing TX-to-TX isolation (typ.) 80 dB Antenna to TX isolation (typ.) 65 dB 2nd harmonic suppression (typ.) 90 dB Cavity size 6” diameter / 1/4 wave Operating temperature -30°C to +60°C Mounting / Connectors 19” rack mount / N Female Panel dimensions (HWD) in. (cm) 12.25 x 19 x 17 (31 x 48.3 x 43.2) Weight lb. (kg) 75 (34) 5 ch. All specifications subject 18 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice TWDS-1003 Rev. 8/09 TRANSMITTER COMBINERS 851 - 869 MHz M107-860-5TRM-HP, 10TRM-HP 1 COMPACT HIGH POWER TRUNKING COMBINER The Telewave M107-860-5TRM-HP FEATURES Low Loss High Power Combiner is • FIELD TUNABLE designed for trunking applications • 10 TRANSMITTERS INTO up to 175 watts per channel, with ONE ANTENNA up to 10 channels per rack. • POWER MONITORING The combiner uses 7-inch, 3/4 wave FOR ALL CHANNELS AND cavities, and channel expansion or ANTENNA maintenance can be performed • -50 dB RF OUTPUT POWER without disruption of the system. SAMPLER - EACH CHANNEL RF power metering is switchable for forward and reverse directions OPTIONS for each transmitter and antenna. • RECEIVER PANEL - 1RU Convenient remote transmitter keying is included on the RF • 500 WATT DUPLEXER - 15 MHz wattmeter panel. PASSBAND w/ 7-16 DIN • RG-393 PHASING HARNESS All high power trunking combiners WITH 7-16 DIN CONNECTORS are shipped complete in a 19” FOR (2) 5-CHANNEL PANELS x 72” EIA Rack, with power monitoring, wattmeter panel with • HIGH POWER 5-WAY remote keying, 175 watt isolator, 7-16 DIN JUNCTION and -50 dB sampler on 2nd stage isolator load port (75 watt load). Input connectors are N Female and output is 7-16 DIN-F. Standard cabling is high-temp RG-393. SPECIFICATIONS Frequency range 851-869 MHz Channels 1-10 channels into 1 or 2 antennas Channel separation (min) 250 KHz Input power (max) 175 watts per channel Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 Insertion loss per ch. (typ.) 2.2 dB - 5 ch. at 1 MHz spacing 4.25 dB - 5 ch. at 250 KHz spacing 3.2 dB - 10 ch. at 500 KHz spacing TX-to-TX isolation (typ.) 85 dB Antenna to TX isolation (typ.) 80 dB 2nd harmonic suppression (typ.) 90 dB Cavity size 7” diameter / 3/4 wave Operating temperature -30°C to +60°C Mounting / Connectors 19” rack mount / N Female, 7-16 DIN Panel dimensions (HWD) in. (cm) 17.5 x 19 x 17 (44.5 x 48 x 43) Weight lb. (kg) 150 (68.1) 5 ch. All specifications subject Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 19 TWDS-1002 Rev. 8/09 806 - 869 MHz M101-860-10TRM LOW LOSS 800 MHz COMBINER The Telewave M101-860 Trunking Convenient remote transmitter Combiner is an industry leader in keying is included on the RF low-loss combiner technology. Ease wattmeter panel. of installation and maintenance All rack-mount five channel is accomplished by front panel combiners are field expandable tuning. to 10 channels by the addition These trunking combiners are of pre-tuned combiner panels. complete packages, including The modular building-block 19 inch rack or heavy duty steel construction means no specialized cabinet with front and rear locking test equipment is required. doors, receiver distribution system, The advanced mechanical design preselector, and power monitoring of the Telewave 8-inch high “Q” package. cavities assures maximum long- The completely passive combining term system performance. All technique allows for maintenance cables are easily accessible from and addition of channels without the front panel. There are no hidden disruption of the system. cables. Valuable site space is conserved when using efficient Telewave designed combiners, and RF power metering is a standard feature. All forward and reverse power measurements are switchable for each transmitter and antenna. SPECIFICATIONS Frequency range 806-869 MHz Channels 1-10 channels into 1 or 2 antennas Channel separation (min) 500 KHz (250 KHz with 3Q cavities) Input power (max) 150 watts per channel Impedance / Input VSWR (typ.) 50 ohms / 1.25:1 Insertion loss per ch. (typ.) 2.0 dB - 5 ch. at 1 MHz spacing 3.2 dB - 10 ch. at 500 KHz spacing TX-to-TX isolation (typ.) 85 dB Antenna to TX isolation (typ.) 80 dB 2nd harmonic suppression (typ.) 90 dB Cavity size 8” diameter / 1/4 wave Operating temperature -30°C to +60°C Mounting / Connectors 19” rack mount / N Female Panel dimensions (HWD) in. (cm) 24.5 x 19 x 16 (62 x 48.3 x 40.6) Weight lb. (kg) 75 (34) 5 ch. All specifications subject 20 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice TWDS-1017 Rev. 7/09