Product data sheet ZB4BH02 Characteristics black flush pushbutton head Ø22 push-push unmarked Main Range of product Harmony XB4 Product or component Head for non-illuminated pushbutton type Device short name ZB4 Bezel material Chromium plated metal Mounting diameter 22 mm Sale per indivisible 1 quantity Shape of signaling unit Round head Type of operator Push-push Operator profile Black flush unmarked Complementary CAD overall width 29 mm CAD overall height 29 mm CAD overall depth 28 mm Mechanical durability 500000 cycles Electrical composition code C9 for <= 3 contacts using single blocks in front mounting C15 for 1 contacts using single blocks in front mounting C11 for <= 3 contacts using single blocks in front mounting Environment Protective treatment TH Ambient air temperature for storage -40...70 °C Ambient air temperature for operation -25...70 °C Class of protection against electric shock Class I conforming to IEC 60536 IP degree of protection IP66 conforming to IEC 60529 NEMA degree of protection NEMA 4X NEMA 13 IK degree of protection IK03 conforming to IEC 50102 Standards CSA C22-2 No 14 EN/IEC 60947-1 EN/IEC 60947-5-1 EN/IEC 60947-5-4 EN/IEC 60947-5-5 JIS C 4520 UL 508 Product certifications BV CSA DNV GL LROS (Lloyds register of shipping) RINA UL listed Vibration resistance 5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6 Shock resistance 50 gn for 11 ms half sine wave acceleration conforming to IEC 60068-2-27 30 gn for 18 ms half sine wave acceleration conforming to IEC 60068-2-27 Mar 9, 2013 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Product data sheet ZB4BH02 Dimensions Drawings Dimensions 2 Product data sheet ZB4BH02 Mounting and Clearance Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation) Connection by Screw Clamp Terminals or Plug-in Connectors or on Connection by Faston Connectors Printed Circuit Board (1) Diameter on finished panel or support (2) 40 mm min. / 1.57 in. min. (3) 30 mm min. / 1.18 in. min. +0.4 +0.016 (4) Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm / 0.88 in. ) 0 0 (5) 45 mm min. / 1.78 in. min. (6) 32 mm min. / 1.26 in. min. Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection Panel Cut-outs (Viewed from Installer’s Side) A: 30 mm min. / 1.18 in. min. B: 40 mm min. / 1.57 in. min. 3 Printed Circuit Board Cut-outs (Viewed from Electrical Block Side) Dimensions in mm A: 30 mm min. B: 40 mm min. Dimensions in in. A: 1.18 in. min. B: 1.57 in. min. General Tolerances of the Panel and Printed Circuit Board The cumulative tolerance must not exceed 0.3 mm / 0.012 in: T1 + T2 = 0.3 mm max. Installation Precautions ● Minimum thickness of circuit board: 1.6 mm / 0.06 in. ● Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004 ° ● Orientation of body/fixing collar ZB4 BZ009: ± 2 30’ (excluding cut-outs marked a and b). ● Tightening torque of screws ZBZ 006: 0.6 N.m (5.3 lbf.in) max. ● Allow for one ZB4 BZ079 fixing collar/pillar and its fixing screws: ○ every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y). ○ with each selector switch head (ZB4 BD•, ZB4 BJ•, ZB4 BG•). The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5. 4 (1) Panel (2) Printed circuit board Mounting of Adapter (Socket) ZBZ 01• ● 1 2 elongated holes for ZBZ 006 screw access ● 2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ 01• ● 3 8 × Ø 1.2 mm / 0.05 in. holes ● 4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a) ● 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b) ● 6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ 01• Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ 01•. 5 Product data sheet ZB4BH02 Technical Description Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1 Electrical Composition Corresponding to Code C15 1 N/O 1 N/C 1 N/O + N/C or 1 N/O + N/O or 1 N/C + N/C Legend Single contact Double contact Light block Possible location 6