High-Speed Connectorized Terminal Blocks Support Advanced DSL Build-Outs; Various Configurations Available Overview Primary Benefits Telect’s new high-speed connectorized terminal • High performance enables the maximum use of existing blocks support advanced DSL build-out by reducing copper loop and huts rather than re-installing fiber, reduc- insertion loss and crosstalk—all in a standard front-facing ing overall deployment expenses and providing quicker design that’s simple to deploy and highly cost-effective. revenue generation • Specialized cabling, connectors and wiring enable These innovative main distribution frame (MDF) blocks higher-speed signals to help you cost-effectively serve address a simple limitation that faces service providers more customers over a greater distance today: as DSL speeds increase, any weak point in the network reduces the distance, and therefore the number • Internal wiring structure enables the use of standard telco of homes, where service providers can deploy DSL. wiring, rather than the custom cable required in alterna- tive systems With improved electrical characteristics, these new blocks • Category 5-style wiring ensures high performance allow the DSL signal to reach farther into neighborhoods, increasing the potential to serve more customers without • Vast number of configurations available to fit a variety of more costly additional infrastructure (i.e., fiber backbone). standards and practices Telect’s High-Speed Blocks handle bit-rates up to ADSL2+, enabling you to provide customers with the high data Applications speeds they demand without a major capital investment. • DSL Deployment At the same time, existing central office locations can serve more homes within the maximum DSL range by • Central office minimizing signal rate loss. • Conventional MDF • Improved performance characteristics are also available for Telect’s DF and CommScope Cosmic® frame connectorized teminal blocks • Remote locations (using Telect’s TCCS products) ® Telect, Inc. • USA 509.926.6000 • Mexico +52.3338.36.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved High-Speed Connectorized Terminal Blocks Support Advanced DSL Build-Outs; Various Configurations Available Specifications HS+ Terminal Blocks Built to Cat 5 wiring specifications ≤ 0.1 dB, DC to 10 MHz Insertion Loss: ≤ 0.3 dB, DC to 20 MHz Connector View ≤ -26 dB, DC to 10 MHz Return Loss: ≤ -18 dB, DC to 20 MHz ≤ -60 dB, DC to 10 MHz Crosstalk: ≤ -55 dB, DC to 20 MHz Note—Require the use of Telect’s Cat 5-wired 25-pair or 32-pair connectorized cable Mounting Bracket HS Terminal Blocks Insertion Loss: ≤ 0.1 dB, DC to 3 MHz Return Loss: ≤ -26 dB, DC to 3 MHz Crosstalk: ≤ -60 dB, DC to 3 MHz Voice Frequency Terminal Blocks Insertion Loss: ≤ 0.1 dB, DC to 772 KHz End View Return Loss: ≤ -26 dB, DC to 772 KHz Crosstalk: ≤ -60 dB, DC to 772 KHz Ordering Information Connectors 50- and 64-pin connectorized blocks Numerous connectorized terminal block configurations are available available. Telect can supply all connectorized cable assemblies. Dimensions 4.75 in. and 6 in. blocks available Contact Telect for details. Labeling Standard and custom stenciling available • Triple-play defined as 3 simultaneous video channels plus data plus voice. • Latest ADSL2+ designed for >25Mbps for about a mile. ® Telect, Inc. • USA 509.926.6000 • Mexico +52.3338.36.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved