Multiformat Generator TG2000 Features & Benefits Multiformat Analog and Digital Test Signal Generation Reference Generator Performance Level Conforms to Analog and Digital, Video and Audio Industry Standards Modular Expandable Platform Designed for the Requirements of Today and the Future Fully Supports VM700T Video Measurement Routines RAM-based Test DVG1 Digital The TG2000 is a multiformat, analog and Signal Generators with Video Generator Nonvolatile Storage digital, precision signal generation platform. Test Signal Libraries The DVG1 is a multiformat digital test signal Designed for the most demanding test for All Formats generator. The DVG1 supports NTSC com- applications, the TG2000 provides reference Variable Analog and posite and 525 and 625 component digital quality test signals, stressing functions in Digital Video Parameters sampled at 13.5 and 18 MHz. Parallel and both the analog and digital domains and the Applications serial outputs are provided. flexibility to address user-defined testing Research and Development requirements. Comprehensive test signal Full field and active picture CRC generation Studio Reference Generator libraries are supplied in all formats and are is supported on the serial digital outputs Manufacturing Test supplemented by a Windows-based test and may be turned on and off from the Equipment Design signal development program. The modular front panel. Up to 16 channels of 20-Bit Maintenance architecture, RAM-based test signal gener- audio sampled at 48 kHz and locked to the Post-production and ators, and programmable system clocks video sampling clock may be embedded on Broadcast Facilities ensure the TG2000 will meet future needs the serial digital video output. Frequency Automated Manufacturing Test as well as today’s requirements. and level for each channel may be set from the front panel. AVG1 Analog Video Generator AWVG1 Analog Wideband Video Generator The AVG1 is a high accuracy, multiformat analog test signal generator. The AVG1 The AWVG1 is a 30 MHz bandwidth test supports NTSC, PAL, PAL-D, PAL-M, PAL-N, signal generator intended primarily for SECAM, RGB, YC, and Y, B-Y, R-Y. Signal generation of wide band frequency and generation architecture is 12-Bit, 27 MHz transient response test signals. The AWVG1 component with digital modulation for can be used as a source of tri-level sync. composite signals. This ensures high accu- Signal generation is 12 Bits with 72 MHz racy, distortion free signals within a 6 MHz sampling that ensures very low distortion video bandwidth and signals suitable for T pulse generation for bandwidths up to many applications up to 8 MHz. 6 MHz. A fully programmable zone plate generator is included. AWVG1 output is analog composite. • 1 Signal Generators www.tektronix.com/video Multiformat Generator TG2000 HDVG1 Digital HDTV Generator The HDVG1 is a high-accuracy, multiformat, high-definition test signal module that pro- vides three 1.485 Gbps serial digital video test signal outputs in 1080i/60, 59.94, 1080p/25, and 24 Hz rates and 720p formats in 60 and 59.94 field rates. It is program- mable with the included SDP2000 PC-based signal development software. HDST1 Stress Test Module The HDST1 is a HD-SDI Stress Test module that supports stress test capability for 1.485 and 1.485/1,001 Gbps HD-SDI signals. The HDST1 takes in a single HD-SDI signal and outputs a stressed HD-SDI signal. HD TG2000 configured to supply signals in several formats simultaneously. signals from test signal generators (including the HDVG1 module), as well as from HD cameras, VTRs, or switchers, can be used Internal and External AVG1 Analog Video Generator Reference Operation Standards Conformance – EBU N10, as the input signal. Signal stressing options ITU-R BT.624, SMPTE 170M. include jitter (amplitude or frequency), The TG2000 has a high stability internal Frequency Response – Within 0.5% to 6 MHz. amplitude, duty cycle, and random error reference making it suitable as the master Typically within 5% to 8 MHz. insertion. The HDVG1 is recommended as a house reference for most broadcast and Differential Gain Error – ≤0.1%. signal source, since it is capable of providing 1 production/post-production applications. A Differential Phase Error – ≤0.1º* . a signal with low residual jitter, as well as black burst output, selectable for NTSC or S/N Ratio – ≥67 dB unweighted to 6 MHz, measured on a quiet line. the ability to incorporate its frequency offset PAL, is provided with the TG2000 mainframe. 1 SCH Phase Error – ≤2º* . stress feature. Remote Control DVG1 Digital Video Generator SDP2000 Signal Standards Conformance – EBU Tech. The TG2000 provides a versatile and com- Development Program 3267: ITU-R BT.601, BT.656, BT.801; prehensive remote control system. All front SMPTE 125M, 244M, 259M, 267M, 272M, The SDP2000 is a Windows-based software RP 165, RP 178. panel functions and controls are available program that provides facilities to edit signals Maximum Clock Frequency – 36 MHz. via the RS-232 and optional GPIB ports. A in the factory-supplied test signal libraries Resolution – 8- or 10-Bit. subset of those functions is available via and to create new signals for special appli- Serial Output – ground closure control. cations. Line and frame editing functions Amplitude: 800 mV ±10% into 75Ω. Overshoot:≤10%. permit fast, easy changes to full field test Characteristics Rise and Fall times: 0.4 to 1.5 ns. signals and composition of multi-segment Jitter:≤0.2 UI total for all jitter frequencies TG2000 Mainframe p-p above 10 Hz. matrix signals for automated testing appli- Black Burst Output – Standards Conformance: EBU N14, SMPTE RP154. cations. Modified and new signals may be Frequency: named and stored in the factory test signal NTSC or PAL F . SC Long-term Stability:≤1 ppm per year drift. libraries or in new user-created libraries. • 2 Signal Generators www.tektronix.com/video Multiformat Generator TG2000 Embedded Audio – HDST1 HD-SDI AGL1 Analog Genlock Module Stress Test Module Number of Channels: 16 channels in 4 groups; Inputs – Two 75Ω loopthrough; 8 AES/EBU audio pairs. one 75Ω terminating. Input Audio Tones: Loopthrough Inputs – Connector – 75 Ω BNC Connector. Frequency: silence to 16 kHz; Input Range: ±6 dB from nominal black burst. Input Signal – HD-SDI signal. 28 discrete settings. Return Loss:≥40 dB to 5 MHz. Level: 0 to –60 dBFS in 2 dB steps. Bit Rate – 1.485 Gbps, 1.485/1,001 Gbps. Burst Lock Stability: Pre-emphasis: none. Amplitude Changes:≤1 ns change over a Amplitude – 800 mV ±10%. p-p ±3 dB input level. AWVG1 Analog Wideband Standards Conformance – SMPTE 292M. Jitter:≤1 ns with ≥50 dB S/N ratio on a nominal Video Generator Return Loss – ≤15 dB to 742.5 MHz, amplitude reference input. Frequency Response – Within 1% to 20 MHz, ≤10 dB to 1.485 GHz. Typically ≤1º. 2% to 30 MHz. CW Input – Delay Errors – Group Delay:≤3 ns to 20 MHz, Stress Output 1 Input Range: 1 to 2.25 V . ≤5 ns to 25 MHz* . Connector – 75 Ω BNC Connector. p-p Frequencies: NTSC and PAL F ; 1, 5, and 10 MHz. sc Pulse Distortions – Pulse Ringing: 2T:≤0.5% Output Signal – HD-SDI signal. Return Loss:≥30 dB to 10 MHz. peak; T:≤1% peak. Amplitude – 80 to 1040 mV ±5% Lock Stability: p-p Pulse to Bar Ratio – Unity within 0.5% (measured at 4.64 MHz Square Wave). Amplitude Changes:≤1 ns over the valid for T and 2T. input range. Amplitude Setting – 1% step. Jitter:≤1 ns with ≥50 dB S/N ratio for S/N Ratio – ≥60 dB unweighted to 30 MHz, Duty Cycle – 40% to 60%. a 2 V reference input. Typically ≤0.5º. measured on a quiet line. Rise/Fall Time – ≤270 ps (20% to 80%). Timing Adjustment (Black Burst Reference) – 1 * Denotes a typical performance characteristic. Range: Anywhere within the color frame. Return Loss – ≤15 dB to 1.485 GHz. Resolution:≤0.5º. HDVG1 Test Signal Jitter Color Framing – Correct for up to ±45º SCH error Generator Module on the reference input. HF Jitter Standards Compliance – SMPTE 272M, 292M. Jitter Waveform – Sine Wave. Power Source Electrical Characteristics – Mains Range – Connector (serial): (3) BNC. Frequency – 0.1 Hz to 10 MHz. Voltage: 87 to 132 or 174 to 250 VAC. Bit Rate: 1.485 Gbps, 1.485/1,001 Gbps. Amplitude – 0.01 to 1 UI. Frequency: 50 to 60 Hz. Formats: Amplitude Setting – 0.01 UI. 1080i/60 Hz, 59.94, 50, 25, and 24 Hz. Power Consumption – Typically 220 W for 720p/60 Hz and 59.94 Hz. a fully loaded TG2000 mainframe. Amplitude Error – Amplitude: 800 mV ±10%. ≤0.1 UI (≤1 MHz, at 1 UI setting). Environmental Overshoot:≤10%. ≤0.1 UI ±5% (≤5 MHz, at 1 UI setting). Temperature – Rise and Fall Times:≤270 ps (20% to 80%) ≤0.1 UI ±10% (≤10 MHz, at 1 UI setting). Operating: 0 ºC to +40 ºC. difference less than 100 ps. Nonoperating: –40 ºC to +65 ºC. LF Jitter DC Offset (AC coupled): 0.0 V ±0.5 V. Jitter:≤135 ps (alignment jitter). Jitter Waveform – Sine Wave. Certifications Return Loss: EMC – Frequency – 0.1 Hz to 10 kHz. ≤15 dB from 5 MHz to 742.5 MHz. Certified to the EMC Directive 89/336/EEC. Amplitude – 0.01 to 20 UI. ≤10 dB from 742.5 MHz to 1.485 GHz. Safety – Amplitude Setting – 0.01 UI. Audio Signal (Embedded) – Approved to: CSA1010.1, ANSI S82.01. Channels Active: 1,2,3,4,5,6,7,8. Amplitude Error – Complies with: EN61010-1, IEC1010-1. Audio Sampling Frequency: 48 kHz. ≤0.1 UI ±1% (≤1 kHz, at 8 UI setting). Sampling Alignment: Asynchronous, ≤0.1 UI ±5% (≤5 kHz, at 8 UI setting). Physical synchronous without frame numbers, ≤0.1 UI ±10% (≤10 kHz, at 8 UI setting). Characteristics synchronous with frame numbers. Dimensions mm in. Error Insertion Sample Bits: 24, 20. Height 133 5.23 Error Rate – 0 to 120 Errors/second. For Each Channel: Width 483 19.0 Audio Amplitude: 0 to –60 dBFS Error Rate Setting – 0.1 Error/second. Depth 584 23.0 in 1 dB increments. Weight kg lbs. Cable Simulator Audio Frequency (Hz): 50, 100, 150, 200, 250, Net 17.3 38.0 Connector – 75 Ω BNC Connector. 300, 400, 500, 600, 750, 800, 1000, 1200, Shipping 23.7 52.0 1500, 1600, 2000, 2400, 3000, 3200, 4000, Cable Type – L-5CFB. 4800, 6000, 8000, 9600, 12000, 16000. Return Loss – ≤15 dB to 1.485 GHz. Length – 20 m, 100 m. • Signal Generators www.tektronix.com/video 3 Contact Tektronix: Multiformat Generator ASEAN / Australasia / Pakistan (65) 6356 3900 TG2000 Austria +43 2236 8092 262 Belgium +32 (2) 715 89 70 Brazil & South America 55 (11) 3741-8360 TG2000 Ordering Information Canada 1 (800) 661-5625 Generator Mainframe with BG1 Black Central Europe & Greece +43 2236 8092 301 When Ordering, Please Observe Burst Generator. These Simple Guidelines: Denmark +45 44 850 700 AVG1 Finland +358 (9) 4783 400 At least one signal generation module must Analog Video Generator. accompany each TG2000 mainframe France & North Africa +33 (0) 1 69 86 80 34 DVG1 Germany +49 (221) 94 77 400 Only one AGL1 Genlock Module per Digital Video Generator. Hong Kong (852) 2585-6688 TG2000 mainframe Opt. S1 – SDI Test. India (91) 80-2275577 Only one GP1 GPIB Interface Module per AWVG1 Italy +39 (02) 25086 1 each TG2000 mainframe Analog Wideband Video Generator. Japan 81 (3) 3448-3010 Signal generator modules (AVG1, DVG1) Tri-level Sync Generator. Mexico, Central America & Caribbean 52 (55) 56666-333 may be combined in any mix desired up AGL1 The Netherlands +31 (0) 23 569 5555 to the TG2000 mainframe limit of 8. The mainframe may contain a maximum of Analog Genlock Module. Norway +47 22 07 07 00 4 of any combination of HDVG1 and People’s Republic of China 86 (10) 6235 1230 GP1 AWVG1 modules Poland +48 (0) 22 521 53 40 GPIB interface. Only one HDST1 module per TG2000 Republic of Korea 82 (2) 528-5299 HDVG1 mainframe. Additional limitations may Russia, CIS & The Baltics +358 (9) 4783 400 High Definition Video Generator. apply, depending upon other modules South Africa +27 11 254 8360 loaded in a mainframe configured with HDST1 Spain +34 (91) 372 6055 an HDST1. Contact Tektronix Technical HD-SDI Stress Test Module. Sweden +46 8 477 6503/4 Support for details Support Options Taiwan 886 (2) 2722-9622 The performance of the TG2000 is degraded Opt. C3 – Calibration Service 3 Years. United Kingdom & Eire +44 (0) 1344 392400 to the E4 environment for radiated emissions Opt. R3 – Repair Service 3 Years. USA 1 (800) 426-2200 only when operating with a combination of HDVG1 and HDST1 in HD-SDI stress USA (Export Sales) 1 (503) 627-1916 testing applications For other areas contact Tektronix, Inc. at: 1 (503) 627-7111 Updated 20 September 2002 Add Opt. 88 to each item ordered. This will ensure your TG2000 package will come assembled and calibrated as a single unit Modules ordered to add to an existing Our most up-to-date product information is available at: TG2000 package do not require Opt. 88 www.tektronix.com Product(s) are manufactured in ISO registered facilities. Copyright © 2003, Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks or regis- tered trademarks of their respective companies. 04/03 HB/SFI 20W-07270-5 4 Signal Generators • www.tektronix.com/video