TAMURA OVS-15J
![](/sitefiles/eliteparts/image-not-avail.png)
Description
Tamura OVS-15J AC90-132VAC/AC180-264V (Automatic Voltage Selection), 15 V/0-25 A Single Output Power Supply with Optional Cover
Part Number
OVS-15J
Price
Request Quote
Manufacturer
TAMURA
Lead Time
Request Quote
Category
TBD
Datasheet
Extracted Text
REVISIONS REV DESCRIPTION DATE ISSUED BY / - ISSUE 1 A REVISIED OPERATING TEMP ON PAGE 4. 07/02/02 RJ OVP FOR 48V ON PAGE 2. REMOTE ON/OFF ON PAGE 2. B CHANGED CN4 ON PAGE 5 07/12/02 RJ C CHANGED D (MODELS – H & J ON PAGE 4 11/20/03 JC D REVISED NOTE D. FOR –H &J: SWITCHED WITH & WITHOUT COVER 06/26/06 YS TEMPS FILE NAME: CAD1:MSWORD:PA211242.DOC SCALE: NONE REV: D SH 1 OF 7 TITLE: DOCUMENT NUMBER: OVS-U (UNIVERSAL INPUT) SERIES SPECIFICATION P-A2-11242 PREPARED BY: K. BRENNAN 06/26/06 43352 BUSINESS PARK DRIVE • TEMECULA • CA • 92590 ENGINEERING: M. PITCHAI 06/26/06 TEL: (951) 699-1270 • FAX: 9516769482 APPROVED: Y. SEKIGUCHI 06/26/06 PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY ITEMS TO WHICH TAMURA RETAINS THE EXCLUSIVE RIGHT OF DISSEMINATION, REPRODUCTION, MANUFACTURE AND SALE. THIS DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING. A. Electrical Specifications (1) AC Input Voltage Rating AC100 - 230V, 50/60Hz (47 - 63Hz) AC90 - 264V ------E Series AC90 - 132VAC / AC180 - 264V ------F to J Series (Automatic voltage selection) DC Input Voltage Range DC115 - 372V ------E Series DC230 - 372V ------F to J Series with JW1 open (2) Input Surge Current 35A MAX for E Series at nominal line (115/230V) cold start 30A MAX for F to J Series at nominal line (115/230V) cold start (3) DC Output Adjustment Range ± 10% MIN 24V output: 22.8V to 29.2V (4) Line Regulation ± 0.5% MAX under specified input range (5) Load Regulation ± 0.5% MAX from no load to full rated load (6) Output Ripple and Noise 3/5 - 15V output 75mVp-p MAX 24V output 120mVp-p MAX DC to 20MHz BW 28, 48V output 240mVp-p MAX (7) Hold-up Time 20msec MIN under nominal line and rated load (8) Output Transient Response 1msec MAX over ±2% of rated voltage under 50 - 100% load change (9) Output Voltage Rise Time 100msec MAX, from 10% to 90% of rated output voltage (10) Efficiency 70% MIN at nominal line and rated load (11) Overload Protection 120% TYP of rated load, fold-back limiting type (12) OverVoltage Protection 3V output 3.8 - 4.6V 5V output 5.7 - 6.7V 12V output 14.25 - 15.75V 15V output 17.25 - 18.75V 24/28V output 31.0 - 34.5V 48V output 54.0 - 62.0V (13) Leakage Current 0.75mA rms MAX (14) Overshoot No overshoot during turn ON/OFF (15) Output Voltage Stability ± 0.1% MAX for 8 hours after 20 minute warm-up (16) Temperature Coefficient ±0.03% per deg. C MAX (17) Remote/Local Sensing Built-in (18) Remote ON/OFF Control Built-in F, G, H and J Series, 300uA MIN < 1V for inhibit, > 4.5V (or open) for ON FILE NAME: CAD1:MSWORD:PA211242.DOC SCALE: NONE REV: D DATE:06/26/06 SH 2 OF 7 TITLE: OVS-U (UNIVERSAL INPUT) SERIES DOCUMENT NUMBER: 43352 BUSINESS PARK DRIVE • TEMECULA • CA • P-A2-11242 92590 TEL: (951) 699-1270 • FAX: 9516769482 19) AC Power Fail Signal Built-in on 5V output models only, other voltages optional Power Good Logic “0” Power Fail Logic “1”, 5msec MIN pulse width, output 4.5V ±5% 20) Current Sharing Current sharing capability available by using CS terminal and external circuit 21) Surge Voltage Test Meets IEEE587 C62.41 test method with no damage to power supply 22) Withstand Voltage AC 3KV (Input - Output), AC 1.5KV (Input - Chassis ground) 23) Insulation Resistance 50Mohm MIN DC500V (Input - Output) 24) Part Number Description Model No. O V S - - U Series Name U: No cover (Standard) UC: With cover (Option) Output voltage Case size CASE SIZE MODEL VOLTS AMPS OVS-5E-UC 5 0-10 OVS-12E-UC 12 0-5 E OVS-15E-UC 15 0-4 OVS-24E-UC 24 0-2.5 OVS-48E-UC 48 0-1.2 OVS-5F-UC 3.2 * 2-20 * 5 * 0-20 * OVS-12F-UC 12 0-10 F OVS-15F-UC 15 0-8 OVS-24F-UC 24 * 0-5 * 28 * 0-3.8 * OVS-48F-UC 48 0-2.3 OVS-5G-UC 3.2 * 3-30 * 5 * 0-30 * OVS-12G-UC 12 0-15 G OVS-15G-UC 15 0-12 OVS-24G-UC 24 * 0-8 * 28 * 0-6 * OVS-48G-UC 48 0-3.7 OVS-5H-UC 3.2 * 4.5-45 * 5 * 0-45 * OVS-12H-UC 12 0-22 H OVS-15H-UC 15 0-18 OVS-24H-UC 24 * 0-12 * 28 * 0-9.2 * OVS-48H-UC 48 0-5.5 OVS-5J-UC 3.2 * 6-60 * 5 * 0-60 * OVS-12J-UC 12 0-30 J OVS-15J-UC 15 0-25 OVS-24J-UC 24 * 0-16 * 28 * 0-12.2 * OVS-48J-UC 48 0-7.3 * INDICATES A DUAL RATING FILE NAME: CAD1:MSWORD:PA211242.DOC SCALE: NONE REV: D DATE:06/26/06 SH 3 OF 7 TITLE: OVS-U (UNIVERSAL INPUT) SERIES DOCUMENT NUMBER: 43352 BUSINESS PARK DRIVE • TEMECULA • CA • 92590 P-A2-11242 TEL: (951) 699-1270 • FAX: 9516769482 Note 1. Output ripple and noise to be measured with a 4.7uF +0.1 uF film or ceramic capacitor measured at points A as shown below. Note 2. Output voltage to be measured at output terminals, Points B as shown below. Note 3. OVS-5*-U has a dual rating of 3.2V and 5V. The unit is shipped from the factory set to 5V. To obtain 3.2V, the unit must be modified according to the instructions. Note 4. OVS-24*-U has a dual rating of 24V and 28V. The unit is shipped from the factory set to 24V. To obtain 28V, customer must readjust the output voltage potentiometer. POINT B POINT A OUTPUT Measuring Points A: Output Ripple and Noise + + 0.1 uF LOAD B: Output Voltage POWER SUPPLY 4.7uF Capacitors - 4.7uF: Low ESR Electrolytic OUTPUT 0.1uF: Polyester film or ceramic POINT B POINT A 150mm +/-10mm (5.9” +/-0.4”) B. Safety Meets UL1950, C22.2 No. 234, EN60950, VDE0805 C. EMI Meets FCC20780 Part 15J Class B E, F Series Class A G, H, J Series VDE 0871 Class B E, F Series Class A G, H, J Series VCC1 Class 2 E, F Series Class 1 G, H, J Series Note 1. Models OVS-48E-UC and -48F-UC meet Class A for FCC and VDE and meet Class 1 with VCC1 D. Environmental (1) Operating Temperature MODELS –E, F & G: 0 to +40 deg. C with cover, 0 to +50 deg. C without cover* In either case, the temperature at the center portion on the side of the chassis should be +60 deg. C MAX. For operation above +40 with cover (+50 deg. C without cover) derate linearly to 50% load at +55 deg. C with cover (+65 deg. C without cover). In either case, the temperature at the center portion on the side of the chassis should be +70 deg. C MAX. * Ambient temperature to be measured at 1” above the main transformer. MODELS –H & J: 0 to +40 deg. C with cover, 0 to +50 deg. C without cover* In either case, the temperature at the center portion on the side of the chassis should be +60 deg. C MAX. For operation above +40 deg. C without cover (+50 deg. C with cover) derate linearly to 50% load at +55 deg. C without cover (+65 deg. C with cover). In either case, the temperature at the center portion on the side of the chassis should be +70 deg. C MAX. *Ambient temperature to be measured at 1” above the main transformer (2) Storage Temperature -20 to +85 deg. C FILE NAME: CAD1:MSWORD:PA211242.DOC SCALE: NONE REV: D DATE: 06/26/06 SH 4 OF 7 TITLE: OVS-U (UNIVERSAL OUTPUT) SERIES DOCUMENT NUMBER: 43352 BUSINESS PARK DRIVE • TEMECULA • CA • 92590 P-A2-11242 TEL: (951) 699-1270 y FAX: 9516769482 (3) Operating Humidity 10 - 90% RH, non condensing (4) Storage Humidity 10 - 95%, non condensing (5) Vibration 10 - 55Hz, 2G (All axis, 1 hour) (6) Shock 20msec, 20G (All axis, 3X ea.) E. Power Factor Correction Use Tamura Part Number PFC-500 as an external active filter power supply for OVS-E through J Series F. Input and Output terminals Input Output *I/O Terminal Screws: M4 CN1 (Remote sense) Pin Assignment #1 pin +Sense #2 pin -Sense CN2 (Input / Output Signal) Pin Assignment #1 pin CS (Current sharing, external circuit required) #2 pin AC Power Fail signal output (+5V only, other voltages optional) #3 pin SG (Signal Ground) #4 pin Remote ON/OFF (not available on E Series) CN3, CN4 Jumper Tip Position CN3 +OUT CN4 -OUT #1 Front side of Short for Remote Sensing (Use CN1) Power Supply Short for Local Sensing (CN1 not used) CN1 Part No: 5273-02A/Molex Mating Part No: 5195-02 or 5239-02/Molex FILE NAME: CAD1:MSWORD:PA2112421.DOC SCALE: NONE REV: D DATE: 06/26/06 SH 5 OF 7 TITLE: OVS-U (UNIVERSAL OUTPUT) SERIES SPECIFICATION DOCUMENT NUMBER: 43352 BUSINESS PARK DRIVE y TEMECULA y CA y 92590 P-A2-11242 TEL: (951) 699-1270 y FAX: 9516769482 CN2 Part No: 5045-03A/Molex ----E Series 5045-04A/Molex ----F through J Series Mating Part No: 5102-03 or 5051-03/Molex ---- E Series 5012-04 or 5051-04/Molex ----F through J Series CN3, 4 Part No: 5548-03A/Molex Tip Part No: 90059-0013/Molex G. Mechanical Specifications dimensions shown in mm (inches). See sheet 7 for drawing representations MODEL A B C D E F G H R S T 117.3 12.7 76.29 12.7 104.6 124 25.4 50.8 12.7 76.2 2.00 OVS-E (4.62) (0.50) (3.00) (0.50) (4.12) (4.88) (1.00) (2.00) (0.50) (3.00) (0.079) 180.3 38.1 114.3 12.7 104.6 124 30.2 60.2 38.1 114.3 2.00 OVS-F (7.10) (1.50) (4.50) (0.50) (4.12) (4.88) (1.19) (2.37) (1.50) (4.50) (0.079) 218.4 12.7 177.8 12.7 104.6 124 30.2 60.2 12.7 177.8 2.00 OVS-G (8.60) (0.50) (7.00) (0.50) (4.12) (4.88) (1.19) (2.37) (0.50) (7.00) (0.079) 269.2 12.7 228.6 12.7 104.6 124 33.3 66.0 12.7 228.6 3.00 OVS-H (10.60) (0.50) (9.00) (0.50) (4.12) (4.88) (1.31) (2.60) (0.50) (9.00) (0.116) 304.8 12.7 254 12.7 104.6 124 34.8 69.9 12.7 279.4 3.00 OVS-J (12.00) (0.50) (10.00) (0.50) (4.12) (4.88) (1.37) (2.75) (0.50) (11.00) (0.118) ±1.016 ±0.508 ±0.254 ±0.508 ±0.254 ±1.016 ±0.508 ±1.016 ±0.508 ±0.254 N/A TOLERANCES (±0.04) (±0.02) (±0.01) (±0.02) (±0.01) (±0.04) (±0.02) (±0.04) (±0.02) (±0.01) Material List ITEM # PART NAME QTY MATERIAL 1 CHASSIS 1 ALUMINUM SHEET 2 COVER 1 ALUMINUM SHEET 3 LABEL 1 PAPER 4 LABEL 1 PAPER FILE NAME: CAD1:MSWORD:PA211242.DOC SCALE: NONE REV: D DATE:06/26/06 SH 6 OF 7 TITLE: OVS-U (UNIVERSAL OUTPUT) SERIES DOCUMENT NUMBER: 43352 BUSINESS PARK DRIVE y TEMECULA y CA y 92590 P-A2-11242 TEL: (951) 699-1270 y FAX: 9516769482 FILE NAME: CAD1:MSWORD:PA211242.DOC SCALE: NONE REV: D DATE:06/26/06 SH 7 OF 7 TITLE: OVS-U (UNIVERSAL OUTPUT) SERIES SPECIFICATION DOCUMENT NUMBER: 43352 BUSINESS PARK DRIVE y TEMECULA y CA y 92590 P-A2-11242 TEL: (951) 699-1270 y FAX: 9516769482
Frequently asked questions
What makes Elite.Parts unique?
![chervon down](/assets/images/chervon-down.png)
What kind of warranty will the OVS-15J have?
![chervon down](/assets/images/chervon-down.png)
Which carriers does Elite.Parts work with?
![chervon down](/assets/images/chervon-down.png)
Will Elite.Parts sell to me even though I live outside the USA?
![chervon down](/assets/images/chervon-down.png)
I have a preferred payment method. Will Elite.Parts accept it?
![chervon down](/assets/images/chervon-down.png)
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods