FTR-K1 SERIES POWER RELAY 1 POLE - 3, 5A Medium Load Control JY Series n FEATURES l UL, CSA, VDE recognized l High sensitivity and low power consumption l High insulation l Wide operating range l DIL pitch terminals l Plastic sealed type, RTIII l Socket mounting type and socket available l Compatible with solid state relays type SJ l RoHS compliant. Please see page 7 for more information n PARTNUMBER INFORMATION JY - 12 H E - K P* [Example] (a) (b) (c) (d) (e) (f) (a) Relay type JY : JY Series (b) Coil rated voltage 12 : 4.5....48VDC Coil rating table at page 3 (c) Contact style Nil : 3A (Single contact) H : 5A (Single contact) W : 3A (Bifurcated contact) (d) Contact material Nil : Gold-plate silver cadmium oxide (single contact type) Nil : Gold overlay silver alloy (bifurcated contact type) E : Silver cadmium oxide (single contact type) (e) Enclosure K : Plastic sealed type, RTIII (f) Terminal type Nil : PC board mounting type P : Socket mounting type (without JY-W) Note: Actual marking omits the hyphen (-) of (*) 1 FTR-K1 SERIES JY SERIES n SPECIFICATION Item 3A Type 5A Type JY - ( ) W JY - ( ) JY - ( ) E JY - ( ) H JY - ( ) HE Contact Configuration 1 form A (SPST-NO) Data Construction Bifurcated Single Gold-over- Gold-plate Silver Gold-plate lay silver silver Silver cad- Material cadmium silver cad- alloy cadmium mium oxide oxide mium oxide AgNi oxide Max. 100 Max. 30 Max. 100 Resistance (initial) (at 6 VDC, 1A) Max. 30 mOhm mOhm mOhm mOhm Contact rating 3A, 250VAC / 30VDC 5A, 250VAC / 30VDC Max. carrying current 5A Max. switching voltage 250VAC / 150 VDC Max. switching power 750VA, 90W 1,250VA, 150W Max. switching current 3A 0.1mA 10mA 100mA 10mA 100mA Min. switching load * 100 mVDC 5VDC 5VDC 5VDC 5VDC 6 Life Mechanical Min. 20 x 10 operations 3 Electrical Min. 100 x 10 operations (contact rating) Coil Data Rated power (at 20 °C) 200 mW (48V type: 360 mW) Operate power (at 20 °C) 100 mW (48V type: 170 mW) Operating temperature range -40 °C to +90 °C (no frost) (48V type: +80 °C) Timing Data Operate (at nominal voltage) Max. 6 ms (without bounce) Release (at nominal voltage) Max. 3 ms (no diode) Insulation Resistance (initial) Min. 1,000MOhm at 500VDC Dielectric strength Open contacts 750VAC, 1min Contacts to coil 2,000VAC, 1min Surge strength Coil to contacts 4,000V / 1.2 x 50µs standard wave Other Misoperation 10 to 55Hz double amplitude 1.5 mm Vibration resistance Endurance 10 to 55Hz double amplitude 4.5 mm Misoperation Min. 100m/s² (11 ± 1ms) Shock Endurance Min. 1,000m/s² (6 ± 1ms) Weight Approximately 5 g Sealing Plastic sealed, RTIII * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels. 2 JY SERIES FTR-K1 SERIES n COIL RATING Coil Coil Rated Coil Must Operate Must Release- Coil Resistance Rated Power Code Code Voltage Voltage Voltage +/- 10% (Ohm) (mW) (VDC) (VDC) * (VDC) * 5A type 3A type 4.5 4.5 4.5 100 3.1 0.23 5 5 5 125 3.5 0.25 6 6 6 180 4.2 0.3 200 9 9 9 405 6.3 0.45 12 12 12 720 8.4 0.6 18 18 18 1,620 12.6 0.9 24 24 24 2,880 16.8 1.2 48 48 48 6,400 32.6 2.4 360 101 - 23.5 2,760 15.5 1.18 200 105 - 12 720 8.4 0.6 107 - 5 125 3.5 0.25 Note: All values in the table are valid for 20°C and zero contact current. * Specified operate values are valid for pulse wave voltage. n SAFETY STANDARDS Type Compliance Contact rating UL UL 508 Flammability: UL 94-V0 (plastics) [JY-H, JY-HE] E56140 5A, 250 VAC / 30 VDC (resistive) CSA C22.2 No. 14 1/8 HP, 125VAC, 250 VAC LR 35579 Pilot duty code C150 [JY, JY-W, JY-E] 3A, 250 VAC / 30 VDC (resistive) 1/10 HP, 125VAC, 250 VAC Pilot duty: C150 VDE VDE 0435 part 201 3A, 250VAC, cos φ1, 100K (JY..W-K 3A, 30VDC, 0msec. 100K type) 3 FTR-K1 SERIES JY SERIES n CHARACTERISTIC DATA n REFERENCE DATA 4 FTR-K1 SERIES JY SERIES 5 FTR-K1 SERIES JY SERIES n DIMENSIONS 6 FTR-K1 SERIES JY SERIES RoHS Compliance and Lead Free Information 1. General Information l All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including amendments. l Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005. (Amendment to Directive 2002/95/EC) l All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf l Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. 2. Recommended Lead Free Solder Profile l Recommended solder Sn-3.0Ag-0.5Cu. Flow Solder condition: Pre-heating: maximum 120˚C Soldering: dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. Tin Whiskers l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 7 FTR-K1 SERIES JY SERIES Fujitsu Components International Headquarter Offices Japan Europe Fujitsu Component Limited Fujitsu Components Europe B.V. Gotanda-Chuo Building Diamantlaan 25 3-5, Higashigotanda 2-chome, Shinagawa-ku 2132 WV Hoofddorp Tokyo 141, Japan Netherlands Tel: (81-3) 5449-7010 Tel: (31-23) 5560910 Fax: (81-3) 5449-2626 Fax: (31-23) 5560950 Email: promothq@ft.ed.fujitsu.com Email: info@fceu.fujitsu.com Web: www.fcl.fujitsu.com Web: emea.fujitsu.com/components/ North and South America Asia Pacific Fujitsu Components America, Inc. Fujitsu Components Asia Ltd. 250 E. Caribbean Drive 102E Pasir Panjang Road Sunnyvale, CA 94089 U.S.A. #01-01 Citilink Warehouse Complex Tel: (1-408) 745-4900 Singapore 118529 Fax: (1-408) 745-4970 Tel: (65) 6375-8560 Email: components@us.fujitsu.com Fax: (65) 6273-3021 Web: http://us.fujitsu.com/components Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2010 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for gen- eral information purposes. The use of the contents, data and information provided in this datasheet is at the users’ own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehen- sive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. August 6, 2010. 8