Manufacturers
TAC MX41-7073
Description
MX41-7073 TAC TAC MX41-7073 Series Damper Actuators
Part Number
MX41-7073
Price
Request Quote
Manufacturer
TAC
Lead Time
Request Quote
Category
PRODUCTS - M
Datasheet
Extracted Text
™ TAC DuraDrive Mx41-7073 Series Spring Return Actuator 60 in-lb (7 Nm) minimum torque Torque: 60 lb-in (7 Nm) minimum. Connections: 3 ft. (0.9 m) cable, 1/2-in. conduit connectors. DuraD Rotation: CW or CCW spring return using reverse mounting. ® rive Control Action: Direct/reverse signal selection MS41 only. Shaft Size: 3/4-in. (19 mm) diameter, 1/2-in. (13 mm) square. NEMA1, NEMA 2 (IEC IP54) with conduit connector in the Housing: down position. Dimensions: 10-1/2 H x 4 W x 3-1/2 D in. (287 x 100 x 89 mm) Overload Protection: Throughout rotation. Angle of Rotation: 93° nominal. Position Indication: Pointer and scale. US Two SPDT 7A on MA41-7073-502, MF41-7073-502, Built-in Auxiliary Switches: MS41-7073-502 only. Override: Manual. Motor Type: All brushless DC except MA41-7073 -brush. Mx41- MA41-7073: Refer to F-26642. General Instructions: MF41-7073: Refer to F-26644. 7073 MS41-7073: Refer to F-26645. Series MA41-7073: Refer to Figure 12 on page 176. Wiring Diagrams: MF41-7073: Refer to Figures 21 to 24 on pages 179 to 181. Spring MS41-7073: Refer to Figure 55 to 57 on pages 194 to 195. Return UL-873. Agency Listing: EMC Directive (89/336/EEC). Low Voltage Directive Actuator (72/23/EEC). UL tested for Canadian Standards C22.2 No. 24-93. Australia C-Tick. Actuator Inputs Outputs Approximate Timing in Weight Seconds Part Number VA @ Auxiliary Control Voltage Feedback Spring lbs (kg) 60 Hz Switch Powered Return MA41-7073 No 6.8 (3.1) 60 in-lb (7 2-Position 4.8 <80 <40 MA41-7073-502 Two 7.0 (3.2) Nm) None MF41-7073 No 6.5 (2.9) minimum Floating 24 Vac ± 20% 6.2 torque 24 Vac MF41-7073-502 22-30 Vdc Two 7.0 (3.2) <195 <30 MS41-7073 2-10 Vdc No 6.5 (2.9) 4-20 5.8 2-10 Vdc a MS41-7073-502 Two 7.0 (3.2) mAdc a With the addition of a 500 ohm resistor. See Accessories section for compatible accessories. F-27411-2 © Copyright 2007 TAC. All Rights Reserved 13 Damper Actuators
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the MX41-7073 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods