SYPRIS Model CLN-300
Specifications
Aperture size
0.900 inch dia. (23 mm)
Bandwidth
0 to 150kHz (-1 dB)
Coil resistance
25 ohms (at 70 °C)
Current drain (plus output current)
10 mA (at ±1 5 V)-14 mA (at ± 18 V)
di/dt accurately followed
better than 50 A/ms
Dielectric strength
7.5 kV rms / 50 Hz / 1 min.
Linearity
better than ±0.1%
Measuring range
0 to ±6 00 A
Mounting
Panel mount via 2 holes
Nominal analog output current
100 mA-150ma
Nominal current
300 A rms
Offset current temperature drift
± 0.3 mA typ., ± 0.5 mA max.
Operating temperature
-40 °C to +85°C
Output connection
3 Faston terminals 0.248” x 0.031” (6.30 mm x 0.80 mm)
Output reference
To obtain a positive output on the terminal marked “O/P”, aperture
Overall accuracy at 25 °C
± 0.5%
Package
flame retardant plastic case
Response time
less than 500 ns
Sense resistor with ± 12 V at ± 200 A peak
0-30 ohms
Sense Resistor with ± 12 V at at ± 600 A peak
0-5 ohms
Sense resistor with ± 15 V at ± 200 A peak
5-50 ohms
Sense resistor with ± 15 V at ± 300 A peak
5-50 ohms
Sense Resistor with ± 15 V at at ± 600 A peak
5-15 ohms
Sense Resistor with ± 18 V at ± 200 A peak
20-70 ohns
Sense Resistor with ± 18 V at ± 300 A peak
20-70 ohms
Sense Resistor with ± 18 V at ± 600 A peak
20-25 ohms
Sense resistor with with ± 12 V at ± 300 A peak
0-30 ohms
Storage temperature
-40°C to +90°C
Supply voltage (Vdc)
±1 5 (±5 %)-±1 2 to ± 18 (± 5%)
Turns ratio
1:2000
Weight
180-340 grams
Zero current offset at 25°C
± 0.3 mA max.
Features
- Current sensing up to 400A peak
- High overload capacity
- Light duty industrial housing
- Measure and control system
- Measures DC, AC and impulse currents
- Noncontact measurement of high current
- Over current protection
- Power supply Equipment
- Protection of power semiconductors
- Solid core with aperture
- Variable speed drives for motors
- Very fast response and high accuracy
- Welding Equipment
Datasheet
Extracted Text
Current Sensors Closed Loop Hall Effect Model CLN-200/300 Description Models CLN-200 and CLN-300 are closed loop Hall effect current sensors that accurately measure DC and AC currents and provideelectrical isolation between the current carrying conductor and the output of the sensor. Features • High overload capacity • Noncontact measurement of high current • Light duty industrial housing • Measures DC, AC and impulse currents • Solid core with aperture • Current sensing up to 400A peak • CLN-300: integrated bus bar • Very fast response and high accuracy Applications • Variable speed drives for motors • Welding Equipment • Power supply Equipment • Measure and control system • Over current protection • Protection of power semiconductors Electrical Specifications CLN-200 CLN-300 Nominal current (I ) ................................. 200 A rms 300 A rms N Measuring range ...................................... 0 to ±300 A 0 to ±600 A Sense resistor .......................................... R. min. R. max. R. min. R. max. with ± 12 V at ± 200 A peak .......... n/a n/a 0 ohm 30 ohm at ± 300 A peak .......... n/a n/a 0 ohm 30 ohm at ± 600 A peak .......... n/a n/a 0 ohm 5 ohm with ± 15 V at ± 200 A peak .......... 20 ohm 90 ohm 5 ohm 50 ohm at ± 300 A peak .......... 20 ohm 50 ohm 5 ohm 50 ohm at ± 600 A peak .......... n/a n/a 5 ohm 15 ohm with ± 18 V at ± 200 A peak .......... n/a n/a 20 ohm 70 ohm at ± 300 A peak .......... n/a n/a 20 ohm 70 ohm at ± 600 A peak .......... n/a n/a 20 ohm 25 ohm Nominal analog output current .................. 100 mA 150 mA Turns ratio ............................................... 1:2000 Overall accuracy at 25 °C........................... ± 0.5% of I N Supply voltage (VDC) .................................. ±15 (±5%) ±12 to ± 18 (± 5%) Dielectric strength .................................... 7.5 kV rms / 50 Hz / 1 min. (between the current carrying conductor and the output of the sensor) Accuracy-Dynamic Performance Zero current offset at 25°C ....................... ± 0.3 mA max. Offset current temperature drift.................. ± 0.3 mA typ., ± 0.5 mA max. (between 0°C and +70°C ) Linearity .................................................. better than ±0.1% Response time.......................................... less than 500 ns di/dt accurately followed ........................... better than 50 A/m m ms Bandwidth ................................................ 0 to 150kHz (-1 dB) General Information Operating temperature .............................. -40° C to +85°C Storage temperature ................................ -40°C to +90°C Current drain (plus output current) ............. 10 mA (at ±15 V) 14 mA (at ± 18 V) Coil resistance ......................................... 25 ohms (at 70 °C) Package ................................................... flame retardant plastic case Weight ..................................................... 180 grams 340 grams Mounting ................................................ Panel mount via 2 holes Aperture size ........................................... 0.900 inch dia. (23 mm) Output connection ................................... 3 Faston terminals 0.248” x 0.031” (6.30 mm x 0.80 mm) Output reference...................................... To obtain a positive output on the terminal marked “O/P”, aperture current must flow in the direction of the arrow (conventional flow) Notes: o 1. The temperature of the current carrying conductor should not exceed 100 C 2. Due to continuous process improvement, all specifications are subject to change without notice. 6120 Hanging Moss Road • Orlando, Florida 32807 Phone (407) 678-9748 • Fax (407) 677-5765 • www.fwbell.com Current Sensors Mechanical Dimensions All dimensions are in inches (millimeters) Model CLN-200/300 3.150 (80.00) MOUNTING HOLES (2) 0.217 DIA (5.50) 0.500 2.087 (12.70) (53.00) 1.043 (26.50) 2.756 (70.00) FASTON TERMINALS (3) C 0.248 x 0.031 L 0.908 DIA. 0.236 (6.30mm X 0.80mm) (23.06) (6.00) + .394 (10.00) _ 2.283 .394 (10.00) (58.00) O/P 1.142 (29.00) .935 0.264 (23.75) 3.661 (6.70) (93.00) Connection Schematic + BIPOLAR +12 TO +18V CLN-200 _ DC SUPPLY -12 TO -18V CLN-300 GND O/P R SENSE Vout Note: Due to continuous process improvement, all specifications are subject to change without notice. 6120 Hanging Moss Road • Orlando, Florida 32807 Phone (407) 678-9748 • Fax (407) 677-5765 • www.fwbell.com Rev. date 04/2003
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the Model CLN-300 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods