Model CLN-1000 - SYPRIS

Description

SYPRIS CLN-1000 Current Sensor - Closed loop hall effect, dc, ac, up to 400A peak, solid core, 1000 A rms nominal current, dynamic performance sensor

Part Number

Model CLN-1000

Price

Request Quote

Manufacturer

SYPRIS

Lead Time

Request Quote

Category

PRODUCTS - M

Specifications

Aperture size

1.73 inch dia. (44 mm)

Bandwidth

0 to 150 kHz (-1 dB)

Coil Resistance

35 ohms (at 70°C)

Current drain (plus output current)

18 mA (at ± 18 V)

di/dt accurately followed

better than 50 A/ms

Dielectric strength

6 kV rms/50 Hz/1 min

Linearity

better than ±0.1%

Measuring range

0 to ±1500 A

Mounting

panel mount via 4 slots

Nominal analog output current

200 mA

Nominal current

1000 A rms

Offset current temperature drift

± 0.2 mA typ., ±0.3 mA max

Operating temperature

-40 °C to +85°C

Output connection

9 Pin ‘D’ Connector

Output reference

To obtain a positive output on the terminal marked “O/P”, aperture

Overall accuracy at 25°C

± 0.3%

Package

flame retardant plastic case

Response time

less than 1 ms

Sense resistor with ± 12 V at ± 1000 A peak

0-10 ohms

Sense resistor with ± 12 V at ±1200 A peak

0-3 ohms

Sense resistor with ± 18 V at ± 1000 A peak

5-40 ohms

Sense resistor with ± 18 V at ± 1500 A peak

5-15 ohms

Sense resistor with ±1 5 V a t ±1000 A peak

0-25 ohms

Sense resistor with ±1 5 V a t ±500 A peak

0-25 ohms

Storage temperature

-40°C to +90°C

Supply voltage (Vdc)

± 12 to ± 18 (± 5%)

Turns ratio

1:5000

Weight

680 grams

Zero current offset at 25°C

± 0.2 mA max

Features

Current sensing up to 400A peak
High overload capacity
Light duty industrial housing
Measure and control system
Measures DC, AC and impulse currents
Noncontact measurement of high current
Over current protection
Protection of power semiconductors
Solid core with aperture
Variable speed drives for motors
Very fast response and high accuracy
welding Equipment

Datasheet

Sypris=CLN500=datashee-1083546806t.pdf

1474 KiB

Download

Extracted Text

Curren t Sensors Closed Loop Hall Effect M odel CLN-500/1000 Description Models CLN-500 and CLN-1000 are closed loop Hall effect current sensors that accurately measure DC and AC currents and provide electrical isolation between the current carrying conductor and the output of the sensor. Features • Noncontact measurement of high current • High overload capacity • Measures DC, AC and impulse currents • Light duty industrial housing • Current sensing up to 400A peak • Solid core with aperture • Very fast response and high accuracy Applications • Variable speed drives for motors • Measure and control system • Welding Equipment • Over current protection • Power supply Equipment • Protection of power semiconductors Electrical Specifications CLN-500 CLN-1000 Nominal current (I ) 500 A rms 1000 A rms .................................... N Measuring range 0 to ± 1200 A 0 to ±1500 A ......................................... Sense resistor ............................................. R. min. R. max. R. min. R. max. with ±12 V at ±1000 A peak ......... n/a n/a 0 ohm 10 ohm at ±1200 A peak ......... n/a n/a 0 ohm 3 ohm with ±15 V at ±500 A peak ......... 0 ohm 50 ohm 0 ohm 25 ohm at ± 1000 A peak ......... 0 ohm 5 ohm 0 ohm 25 ohm at ± 1500 A peak ......... n/a n/a 0 ohm 5 ohm with ± 18 V at ± 1000 A peak ......... n/a n/a 5 ohm 40 ohm at ± 1500 A peak ......... n/a n/a 5 ohm 15 ohm with ± 24 V at ±500 A peak ......... 10 ohm 130 ohm n/a n/a at ± 1200 A peak ......... 10 ohm 25 ohm n/a n/a Nominal analog output current ..................... 100 mA 200 mA Turns ratio .................................................. 1:5000 Overall accuracy at 25°C............................. ± 0.5% of I ± 0.3% of I N N Supply voltage (VDC) .................................... ± 15 to ± 24 (± 5%) ± 12 to ± 18 (± 5%) Dielectric strength....................................... 6 kV rms/50 Hz/1 min. (between the current carrying conductor and the output of the sensor) Accuracy-Dynamic Performance Zero current offset at 25°C ......................... ± 0.2 mA max. Offset current temperature drift.................... ± 0.2 mA typ., ±0.3 mA max. (between 0°C and +70°C ) Linearity ..................................................... better than ±0.1% Response time ............................................ less than 1 ms di/dt accurately followed ............................. better than 50 A/ms Bandwidth .................................................. 0 to 100 kHz (-1 dB) 0 to 150 kHz (-1 dB) General Information Operating temperature ................................ -40 °C to +85°C Storage temperature .................................... -40°C to +90°C Current drain (plus output current) ................ 22 mA (at ± 24 V) 18 mA (at ± 18 V) Coil resistance ............................................ 50 ohm (at 70°C) 35 ohms (at 70°C) Package ..................................................... flame retardant plastic case Weight ....................................................... 340 grams 680 grams Mounting .................................................... Panel mount via 4 slots Aperture size............................................... 1.02 inch dia. (26 mm) 1.73 inch dia. (44 mm) Output connection ....................................... 3 Faston terminals 9 Pin ‘D’ Connector 0.248" x 0.031" (6.30mm x 0.80mm) Output reference ........................................ To obtain a positive output on the terminal marked “O/P”, aperture current must flow in the direction of the arrow (conventional flow) Notes: o 1.The temperature of the current carrying conductor should not exceed 100 C. 2.Due continuous process improvement, all specifications are subject to change without notice. 6120 Hanging Moss Road • Orlando, Florida 32807 Phone (407) 678-9748 • Fax (407) 677-5765 • www.fwbell.com Current Sensors Mechanical Dimensions All dimensions are in inches (millimeters) Model CLN-500/1000 CLN-500 2.756 2.087 (53.01) (70.00) 3.307 (84.00) .512 (13.00) Connection Schematic .260 (6.60) R SENSE 1.378 +15 TO +24V + (35.00) BIPOLAR .260 (6.6) -15 TO -24V DC SUPPLY CLN-500 MOUNTING SLOT (4) 2.756 GND O/P (70.00) Vout 2.992 (76.00) FASTON TERMINALS (3) .248" x .031" (6.3mm x .80mm) .394 1.023 DIA (10.01) (25.98). + 3.464 (87.98) .394 (10.01) O/P 1.496 1.024 (38.00) (26.00) 3.543 .236 (90.00) (6.00) CLN-1000 3.31 Connection Schematic (84.0) R SENSE +12 TO +18V + 1.38 BIPOLAR (35.0) -12 TO -18V CLN-1000 DC SUPPLY 3.94 2.76 (100.0) GND O/P (70.0) Vout MOUNTING SLOTS (4) 0.26 (6.60) 2.76 (70.0) PIN 1 of SUB D 9-PIN 2.05 3.94 Connection Chart SOCKET (52.0) (100.0) Connector Signal Pin 1 +V 0.71 Pin 2 NC (18.0) Pin 3 O/P 4.33 Pin 4 NC (110.0) Pin 5 -V Pin 6 NC 0.24 1.73 DIA. Pin 7 NC 2.17 (6.0) (44.0) (55.0) Pin 8 NC Pin 9 NC Note: Due to continuous process improvement, all specifications are subject to change without notice. 6120 Hanging Moss Road • Orlando, Florida 32807 Phone (407) 678-9748 • Fax (407) 677-5765 • www.fwbell.com Rev. date 04/2003

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products