Hall Effect GAUSSMETERS Model 7010 GAUSS/TESLA METER Description The Model 7010 single-channel GAUSS/TESLA METER from F.W. Bell leads the way for Advanced Hall Effect Magnetic measuring technology. The easy-to-use front panel programming feature incorporates the latest in user control operations. And the 7010 is capable of simultaneously measuring and displaying seven different parameters, including flux density, frequency, temperature, min, max, peak and valley. This high accuracy instrument is fully equipped to meet most magnetic measuring applications. Bell’s exclusive dynamic probe correcting software increases the 7010 measurement capabilities to make it the most versatile magnetic measuring tool in the world. Key features include high-resolution, high-accuracy and high-speed with a large graphic electroluminescent display. The 7010 features 50 kHz frequency response, temperature and frequency measurements, Auto Zero, Auto Range, Hold functions for Peak, Valley, Min and Max, corrected and uncorrected outputs. The Model 7010 provides the user with gauss, tesla, Oe, A/m, IEEE-488 and RS-232 communications ports and Classifier output. The 7010 operates with Bell’s fifth generation Hall Effect probes. These probes provide temperature compensation and measurement readings (0°C to +75°C) while monitoring the magnetic field. The easy-to-read 1/4 VGA display is easily viewable in most light conditions and can be customized to meet a user’s specific needs. Applications range from basic magnetic measuring to sensitive complicated three- axis vector summing requirements. The F. W. Bell Model 7010 is fully CE compliant. Features • Fully menu-driven for easy operation • Bright 1/4-VGA Readout • Auto Zero and Auto Calibration • Large electroluminescent graphic display • IEEE-488 and RS-232 interface • Over 100 standard probes available • CE Compliant • Automatic probe coefficient correction • Manufactured to ISO 9000 standards • Displays in Gauss, Tesla, Amp/meter or Oe • Comprehensive Technical Support • Relative Mode 6120 Hanging Moss Road • Orlando, Florida 32807 Phone (407) 678-9748 • Fax (407) 677-5765 • www.fwbell.com Rev. date 04/2003 Hall Effect GAUSSMETERS Model 7010 Specifications SPECIFICATIONS Ranges 300mG (30µT)* 3kG(300mT) 3G (300µT)* 30kG (3T) 30G (3mT) 300kG(30T)† * Low field probe 300G (30mT) † High field probe Resolution 1 µG (0.1nT) to 1G (0.1mT) Accuracy (Displayed Reading) DC basic ±0.05% of reading AC basic ±2% of reading Frequency Range DC mode dc to 250Hz AC mode 20Hz to 50kHz Accuracy (Corrected Analog Output) DC basic ±0.1% of range AC basic ±2% of range Frequency Range dc to 500Hz Frequency Range (Uncorrected Analog Output) DC mode dc to 100Hz AC mode 20Hz to 50kHz Analog Output Output Voltage ±3V F . S. or ±10V F.S. or adjustable from 0.1 - 9.9V Source Impedance <100 ohms Connector Standard BNC Additional Influences Temperature Coefficient ±(0.02% of reading ±1 count)/ ºC Temperature Range Operating 0ºC to +50ºC Storage -20ºC to +60ºC Front Panel Display 1/4 VGA, 320 x 240 pixels Electroluminescent graphic display with 4 shades of amber 4.7” (119 mm) W x 3.5” (89mm) H Communication Ports RS-232 Standard 9-pin “D” connector Baud Rate 300,600,1200,2400,4800,9600,19200,38400 bits/sec IEEE-488 Standard 24-pin GPIB connector Protocol IEEE-1987.2 and SCPI-1999 Power Volts: 100/120 or 220/240 Frequency: 50-60 Hz or 50-60 Hz Current: 1.0 A (max) or 0.5 A (max) Size 16.3” (414 mm) Width 5.2” (132mm) Height 13.5” (343mm) Depth Weight 19.6 lbs. (8.9 kg) Net 25.8 lbs. (11.6 kg) Shipping Note: Due to continuous process improvement, specifications subject to change without notice. Sypris Test & Measurement, Inc. • 6120 Hanging Moss Road • Orlando, Florida 32807 • Phone (407) 678-9748 • Fax (407) 677-5765 • www.fwbell.com Rev. date 04/2003