Elite.Parts

Image of SWITCHING POWER INC SPXL-750Q-P

Description

Power Switching SPXL-750 Series V1: 5 @ 120A V2: 24 @ 10A V3: 3.3 @ 10A V4: 12 @ 5A

Part Number

SPXL-750Q-P

Price

Request Quote

Manufacturer

SWITCHING POWER INC

Lead Time

Request Quote

Category

PRODUCTS - S

Specifications

Cooling

Integral fans provide a min. 50 CFM of air.

Efficiency

80% typical.

EMI

Meets FCC Class A and EN55022 Level A

Frequency

47-63 Hz 400Hz. available.

Fusing

15Ampere, 250 VAC, Internal ceramic body fuse.

Humidity

Up to 95% non-condensing.

Input/Output

Isolation 4242 VDC, SELV construction.

Inrush Current

Less than 50 A for 5 msec. @ 115 VAC, or 80 amperes @ 230 VAC.

Line Regulation

± 0.5% over operating line range, all outputs.

Load Regulation

1% for 0% to 100% load changes, V2-V4outputs.

Nominal Input Voltage

115-240 VAC.

Operating Temperature

-20°C to 50°C, Full Output

Operational Input

115-240 VAC

Overshoot

No turn-on or turn-off overshoot.

Overtemperature Protection

Unit shuts down if overheated. Automatic recovery.

Overvoltage Protection

V1 voltage clamp factory set at 20% to 30% above output voltage. V2, V3, V4 failsafe design.

Power Fail

Provides a logic "0", TTL ,5msec before loss of output.

Power Good

Provides a logic "1", TTL, for output V1 above 4.75Volts.

Remote On/Off,shuts

Standard-Open to operate, closure to v1 return unit down.

Remote Sense(V1& V2 output)

Up to 0.5 volts total in load.

Ripple & Noise

1% ripple, 1% noise or 150MV which ever is greater.

Short Circuit and Overload Protection

All outputs are protected from short circuit and overload. Automatic recovery.

Size

5.0"x2.5"x12.92"

Stability

All outputs 0.5% for 8 hrs. after 1 hour warm-up.

Transient Response

Output maximum excursion of ± 5% for 25% load step. Recovery less than 500 µsec.

Turn on time

Less than 500 msec.

Voltage Range

90-264 VAC

Weight

7 lbs.

Features

0.99 PFC Typical
100 KHz Operation
80% Efficiency Typical
Active Current Sharing
All Outputs Adjustable
All Outputs Monotonically Increasing
Meets EN55022 Level A / FCC Class A
Sizes 5"x2.5"x12.92"

Datasheet

spxl-750_DATASHEE-1950862719T.pdf

167 KiB

Download

Extracted Text

SPXL-750 SERIES 750 WATTS ONE TO FOUR OUTPUTS / POWER FACTOR CORRECTED UNIVERSAL INPUT 90-264 VAC LOW PROFILE -2.5 INCH HEIGHT HIGH RELIABILITY GREATER THAN 120,000 HRS. MTBF TYPICAL MODELS AND THEIR OUTPUT RATINGS: MODEL NO. V1 V2 V3 V4 SPXL-750Q-P 5 @ 120A 12 @ 12/20Apk -12 @ 10A 3.3 @ 10A SPXL-750Q-P 5 @ 120A 3.3 @ 12/20Apk -12 @ 10A 5.2 @ 5A FEATURES: SPXL-750Q-P 5 @ 120A 15 @ 12/20Apk -5.2 @ 10A 24 @ 5A SPXL-750Q-P 5 @ 120A 24 @ 10A 3.3 @ 10A 12 @ 5A 100 KHz Operation or conﬁgure your own output requirements from the chart below: Sizes 5"x2.5"x12.92" 80% Efﬁciency Typical OUTPUT OUTPUT OUTPUT Meets EN55022 Level A / FCC Class A VOLTAGE (VDC) AMPERS (MAX) POWER (WATTS) Active Current Sharing V1 2 to 48 120 750 0.99 PFC Typical V2 2 to 48 20 240 All Outputs Adjustable V3 2 to 48 10 120 All Outputs Monotonically Increasing V4 2 to 48 10 120 Remote Sense On outputs 1 and 2 3601 VETERANS HIGHWAY VISIT US ON THE WEB: RONKONKOMA, NEW YORK 11779 http://www.switchpwr.com TEL (631) 981-7231 FAX (631) 981-7266 SPXL-750 SERIES 750 WATT COMPACT SIZE POWER FACTOR CORRECTED *IN PDF FORMAT, PRINT OR ZOOM TO SEE DRAWING Nominal Input Voltage 115-240 VAC. Overtemperature Unit shuts down if overheated. Automatic recovery. Frequency 47-63 Hz 400Hz. available. Protection Operational Input 115-240 VAC Cooling Integral fans provide a min. 50 CFM of air. Voltage Range 90-264 VAC Input/Output Isolation 4242 VDC, SELV construction. Inrush Current Less than 50 A for 5 msec. @ 115 VAC, or 80 amperes @ 230 VAC. Remote Sense Up to 0.5 volts total in load. Fusing 15Ampere, 250 VAC, Internal ceramic (V1& V2 output) body fuse. Efﬁciency 80% typical. Remote On/Off Standard-Open to operate, closure to v1 return ,shuts Turn on time Less than 500 msec. unit down. Load Regulation 1% for 0% to 100% load changes, V2-V4outputs. Power Good Provides a logic "1", TTL, for output V1 above 4.75Volts. 10% min. load required on V1 for max load reg. Power Fail Provides a logic "0", TTL ,5msec before loss of output. on outputs V2 to V4. Line Regulation ± 0.5% over operating line range, all outputs. Operating -20°C to 50°C, Full Output Temperature 50°C to 75°C derate 2% per °C Ripple & Noise 1% ripple, 1% noise or 150MV which ever is greater. 20MHz bandwidth. Transient Response Output maximum excursion of ± 5% for 25% load Stability All outputs 0.5% for 8 hrs. after 1 hour warm-up. step. Recovery less than 500 µsec. Humidity Up to 95% non-condensing. Short Circuit and All outputs are protected from short circuit and EMI Meets FCC Class A and EN55022 Level A Overload Protection overload. Automatic recovery. Size 5.0"x2.5"x12.92" Overshoot No turn-on or turn-off overshoot. Overvoltage V1 voltage clamp factory set at 20% to 30% above Weight 7 lbs. Protection output voltage. V2, V3, V4 failsafe design. SERIES BREAKDOWN: SPXL-750X1-P where X1= S for Single output, D for Dual output, T for Triple output or Q for Quad output REV:F 06/29/05

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products