DS1L5DJ***K Series (Published) Page 1 of 3 3 Pin 50-Ohm Delay Lines (Patent Pending) DS1L5*J***K Series Description This family of delay lines features high bandwidth performance with high reliability for timing control applications with ±25 ps tolerances for time delays up to 0.8 nanoseconds. They feature microstrip transmission line construction on ceramic with equally distributed capacitance for superior high frequency performance. These high-efficiency delay lines are used for clock and data deskew in single-ended circuit design requiring precise timing control. Products are offered in a SIP solder leaded three pin package and they provide space savings when compared to 6-pin SIP products. This product is currently available with solder finishes of Sn63/Pb37, as well as a RoHS compliant solder finish of Sn95.5/Ag3.8/Cu0.7. For the RoHS compliant part, the customer must specify this upon ordering by following the instructions in the part numbering section of this specification. Electrical Time delay values: 0.1 to 0.8ns: 0.05ns steps 0.9 to 1.3ns: 0.10ns steps Above 1.3ns: in development - call factory Time delay tolerance 0.1 to 0.8ns: ±25ps 0.9 to 1.3ns: ±50ps DC Resistance: 0.1 - 1.0ns: less than 1.0 Ω over 1.0ns: less than 1.0 Ω / ns Impedance: 50 Ω +/- 10% Typical rise time: (20-80% max) 0.1ns: 75ps 0.5ns: 80ps 0.6ns: 80ps 1.3ns: 140ps Other values: in development - call factory Typical insertion loss (-3dB): 0.1ns: 3.5 GHz 0.5ns: 3.5 GHz 0.6ns: 3.5 GHz 1.3ns: 2.4 GHz Other values: in development - call factory Rated current: 100mA Temp. coef. of Td: less than 150 ppm/°C Insulation resistance: >100 MΩ @ 50V Isolation resistance: 100 MΩ @ 110V Operating temperature: -40 to +85 °C Storage temperature: -55 to +125 °C Electrical Performance Characteristics: Nominal Time Time Delay Typical Rise Time Typical Insertion Typical Return http://www.thin-film.com/web/tft.nsf/68cd5f6ca5fdd54585256a7b001a7466/98fad98059a... 7/21/2006 DS1L5DJ***K Series (Published) Page 2 of 3 Part Number Delay Tolerance (20%-80%) Loss (-3dB) Loss (-15dB) DS1L5DJ010K 0.10 ns ± 0.025 ns 0.075 ns 3500 MHz 2200 MHz DS1L5DJ020K 0.20 ns ± 0.025 ns 0.057 ns 5450 MHz 1530 MHz DS1L5DJ030K 0.30 ns ± 0.025 ns 0.058 ns 3950 MHz 1220 MHz DS1L5DJ040K 0.40 ns ± 0.025 ns 0.067 ns 3200 MHz 1280 MHz DS1L5DJ050K 0.50 ns ± 0.025 ns 0.068 ns 2770 MHz 1170 MHz DS1L5DJ060K 0.60 ns ± 0.025 ns 0.078 ns 3450 MHz 1940 MHz DS1L5DJ070K 0.70 ns ± 0.025 ns 0.092 ns 3070 MHz 1490 MHz DS1L5DJ080K 0.80 ns ± 0.025 ns 0.102 ns 2620 MHz 1480 MHz DS1L5DJ090K 0.90 ns ± 0.050 ns 0.107 ns 2350 MHz 2140 MHz DS1L5DJ100K 1.00 ns ± 0.050 ns 0.100 ns 2100 MHz 2000 MHz DS1L5DJ110K 1.10 ns ± 0.050 ns 0.106 ns 2010 MHz 1840 MHz DS1L5DJ120K 1.20 ns ± 0.050 ns 0.111 ns 2530 MHz 1740 MHz DS1L5DJ130K 1.30 ns ± 0.050 ns 0.112 ns 2370 MHz 1650 MHz Mechanical Dimensions in mm Marking Marking shall include: a three digit time delay value a "K" representating the "K" series the TFT "don't stop" logo the TFT one digit monthly date code Example: 010K ØM = 0.10 ns part Packaging Requirements z Material -Antistatic Bag with tagboard insert support. z Quantity - 100 pieces per bag. Part Number DS --------------------------------------------- Product designator 1 ---------------------------------------- Element factor L ------------------------------------ Tolerance/Circuit 5 ------------------------------- Impedance D -------------------------- Height Code http://www.thin-film.com/web/tft.nsf/68cd5f6ca5fdd54585256a7b001a7466/98fad98059a... 7/21/2006 DS1L5DJ***K Series (Published) Page 3 of 3 J --------------------- Lead frame type *** --------------- Time Delay K --------- Serial Code -C ------ RoHS Compliant Designator (add only if ordering RoHS compliant part - leave blank if ordering non- RoHS part) 1980 Commerce Drive, North Mankato, MN. 56001 (507) 625-8445 http://www.thin-film.com/web/tft.nsf/68cd5f6ca5fdd54585256a7b001a7466/98fad98059a... 7/21/2006