Near (Sub) EQ-30 SERIES Amplifier Built-in Adjustable Long Range & Fixed-focus Reflective Photoelectric Sensor PNP output Interference type available prevention Unaffected by color or material, 2 m (6.562 ft) distance adjustable fixed-focus sensing Conforming to EMC Directive Not affected by object color or background Long sensing range 2 m 6.562 ft As the EQ-30 series is incorporated EQ-34: Correlation between material (200�200 mm The EQ-30 series can detect an object 7.874�7.874 in) and sensing range (typical) with a 2-segment photodiode as the 2 m 6.562 ft away. receiving element with a unique It is suitable for various applications, circuitry, it detects an object at the such as, sensing objects or positioning 2 6.562 same distance regardless of its color objects traveling on a wide assembly or the background beyond the ad- line, etc. justed sensing range. However, when the background is specular, it may 1 ( ) 3.281 be necessary to change the angle of the sensor. 0 2 m 6.562 ft 2 m These bars indicate the sensing range ··· 6.562 ft with the respective objects when the distance adjuster is set at the sensing 1 m ··· 3.281 ft range of 2 m 6.562 ft, 1 m 3.281 ft and 0.2 m 0.656 ft long, each, with white non- 0.2 m ··· glossy paper. 0.656 ft EQ-34W Two distances (far and near) can be set Compact Insusceptible to contamination on lens With EQ-34W, two sensing distances, It saves space, since a miniaturized The fixed-focus sensing keeps the Far (Main) and Near (Sub), can be set. housing of W20�H68�D40 mm detectability better than diffuse Hence, one sensor can suffice where, W0.787�H2.677�D1.575 in has reflective type sensors even if the lens earlier, two were required. been designed for the fixed-focus is contaminated by dirt, dust, mist, or sensing sensor even though the smoke under an unclean environment. adjustable sensing range is 2 m 6.562 ft long. EQ-34W 20 mm 0.787 in 40 mm 1.575 in 68 mm 2.677 in Far (Main) Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com RX-LS200 RX EX-40 EQ-30 EQ-20 EX-10 EX-20 EX-30 CX-400 PHOTOELECTRIC SENSORS Amplifier Built-in Sensing range L (m ft) White non- glossy paper Black non- glossy paper (Lightness: 5) Cardboard Plywood Black rubber EQ-30 APPLICATIONS Detecting traveling cardboard boxes Detecting people in front of Detecting level in hopper automatic door EQ-34W Upper limit Lower limit Automatic interference prevention Mechanical 2-turn adjuster with indicator Waterproof The EQ-30 series is the first fixed- It features a mechanical 2-turn dis- It has IP67 protection. It can be used focus sensing reflective type sensor to tance adjuster with an indicator that in places splashed with water. incorporate an automatic interference shows the set distance at a glance. prevention function so that two sets of sensors can be installed close together or facing each other. Adjuster indicator NEAR FAR Note: However, take care that if it is exposed Distance adjuster (2-turn) to water splashes during operation, it may detect a water drop itself. Plug-in connector type is available Principle of fixed-focus sensing with 2-segment photodiode Plug-in connector type, which can be Normal reflective type sensors easily disconnected for replacement is operate by sensing the variation in available. In case a problem occurs, the amount of incident beam. 2-segment anyone can replace the sensor in a photodiode However, the fixed-focus reflective minute. (Excluding EQ-34W) sensing type sensor incorporating the 2-segment photodiode operates by sensing the variation in the incident Emitting LED beam angle. Thus, the output is Plug-in connector type activated according to the distance of EQ-34-J the object from the sensor. EQ-34-PN-J Sensing is based on the difference in the This system helps the EQ-30 series in incident beam angle of the dotted line and the being unaffected by object color or a M12 connector solid line in the above figure. background, enabling stable sensing. (IEC conforming) Mating cable CN-24�-C2 (Cable length: 2 m 6.562 ft) CN-24�-C5 "14 mm "0.551 in (Cable length: 5 m 16.404 ft) Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com 257 Amplifier Built-in PHOTOELECTRIC SENSORS RX-LS200 RX EX-40 EQ-30 EQ-20 EX-10 EX-20 EX-30 CX-400 EQ-30 ORDER GUIDE Type Appearance Adjustable range (Note) Model No. Output NPN NPN open-collector EQ-34 output transistor 0.2 to 2 m PNP PNP open-collector EQ-34-PN 0.656 to 6.562 ft output transistor Two Two NPN open-collector EQ-34W outputs transistor outputs NOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets (two types). Note: The adjustable range stands for the maximum sensing range which can be set with the adjuster. Non-detectable 0.1 m The sensor can detect an object 0.1 m 0.328 ft, or more, away. range Actual sensing 2 m 0.328 ft 6.562 ft range of the sensor However, the detectable range of Near (Sub) type of EQ-34W begins at 0.2 m 0.656 ft. 0.2 m 0.656 ft Adjustable range Sensing object Plug-in connector type, 5 m 16.404 ft cable length type Plug-in connector type (standard: cable type) and 5 m 16.404 ft cable length type (standard: 2 m 6.562 ft) are also available. • Table of Model Nos. Type Standard Plug-in connector type (Note) 5 m 16.404 ft cable length type NPN output EQ-34 EQ-34-J EQ-34-C5 PNP output EQ-34-PN EQ-34-PN-J Two outputs EQ-34W EQ-34W-C5 Note: Please order the suitable mating cable separately. • Mating cable for plug-in connector type • CN-24-C�• CN-24L-C� Type Model No. Description CN-24-C2 Length: 2 m 6.562 ft 2 0.34 mm 4-core Straight CN-24-C5 Length: 5 m 16.404 ft cabtyre cable with connector on one end "5 mm Length: 2 m 6.562 ft CN-24L-C2 Cable outer diameter: "14 mm "14 mm "0.197 in Elbow "0.551 in 29 mm "0.551 in "5 mm "0.197 in 43.5 mm Length: 5 m 16.404 ft CN-24L-C5 1.142 in 1.713 in 31 mm 1.220 "5 mm in "0.197 in OPTIONS Sensor mounting bracket Designation Model No. Description • MS-EQ3-1 • MS-EQ3-2 Two M4 Two M4 (length 25 mm 0.984 in) (length 25 mm 0.984 in) Sensor MS-EQ3-1 Back angled mounting bracket screws with washers screws with washers mounting and two M4 nuts are and two M4 nuts are Foot angled mounting bracket bracket MS-EQ3-2 attached. attached. Note: The plug-in connector type does not allow use of some sensor mounting brackets because of the protrusion of the connector. Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com RX-LS200 RX EX-40 EQ-30 EQ-20 EX-10 EX-20 EX-30 CX-400 PHOTOELECTRIC SENSORS Amplifier Built-in EQ-30 SPECIFICATIONS Type NPN output PNP output Two outputs Item Model No. EQ-34 EQ-34-PN EQ-34W Far (Main): 0.2 to 2 m 0.656 to 6.562 ft Adjustable range (Note 1) 0.2 to 2 m 0.656 to 6.562 ft Near (Sub): Refer to diagram in (Note 2) Far (Main): 0.1 to 2 m 0.328 to 6.562 ft Sensing range Near (Sub): 0.2 to 2 m 0.656 to 6.562 ft with white non-glossy paper 0.1 to 2 m 0.328 to 6.562 ft () [with Near (Sub) distance for adjuster at max.] at setting distance 2 m 6.562 ft Hysteresis 10 % or less of operation distance Repeatability Along sensing axis: 10 mm 0.394 in or less, Perpendicular to sensing axis: 1 mm 0.039 in or less (with white non-glossy paper) Supply voltage 10 to 30 V DC Ripple P-P 10 % or less Current consumption 50 mA or less 55 mA or less 90 mA or less NPN open-collector transistor PNP open-collector transistor NPN open-collector transistor • Maximum sink current: 100 mA • Maximum source current: 100 mA • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less • Applied voltage: 30 V DC or less • Applied voltage: 30 V DC or less (between output and 0 V) (between output and �V) between Far (Main) output and 0 V Output [] NP• Residual voltage: 1 V or less NP• Residual voltage: 1 V or less between Near (Sub) output and 0 V (at 100 mA sink current) (at 100 mAsource current) NP• Residual voltage: 1 V or less 0.4 V or less 0.4 V or less (at 100 mA sink current) (at 16 mA sink current) (at16 mA source current) 0.4 V or less (at 16 mA sink current) Utilization category DC-12 or DC-13 Output operation Switchable either Detection-ON or Detection-OFF Short-circuit protection Incorporated Response time 2 ms or less Far (Main) output: Red LED lights up when the Far [] (Main) output is ON Operation indicator Red LED (lights up when the output is ON) Near (Sub) output: Red LED lights up when the Near [] (Sub) output is ON Stability indicator Green LED (lights up under stable light received condition or stable dark condition) (Note 3) Far (Main): 2-turn mechanical adjuster with pointer Distance adjuster 2-turn mechanical adjuster with pointer Near (Sub): Variable adjuster Automatic interference prevention function Incorporated (Two units of sensors can be mounted close together.) Pollution degree 3 (Industrial environment) Protection IP67 (IEC) Ambient temperature �20 to�55 �C �4 to�131 �F (No dew condensation or icing allowed), Storage:�25 to�70 �C �13 to�158 �F Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Ambient illuminance Sunlight: 10,000 ?x at the light-receiving face, Incandescent light: 3,000 ?x at the light-receiving face EMC EN 50081-2, EN 50082-2, EN 60947-5-2 Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure Insulation resistance 20 MΩ, or more, with 250 V megger between all supply terminals connected together and enclosure Vibration resistance 10 to 55 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each 2 Shock resistance 500 m/s acceleration (50 G approx.) in X, Y and Z directions for three times each Emitting element Infrared LED (modulated) Material Enclosure: Polyalylate and Polyethylene terephthalate, Lens: Polyalylate 2 Cable 0.3 mm 3-core (EQ-34W: 4-core) cabtyre cable, 2 m 6.562 ft long 2 Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm , or more, cable. Weight 150 g approx. Accessory Adjusting screwdriver: 1pc. Notes: 1) The adjustable range stands for the 2) The Near (Sub) distance adjustable range, L2, changes with the setting of the Far (Main) distance, L1, maximum sensing range which can be as shown in the table below. set with the adjuster. EQ-34W Near (Sub) distance adjustable range The sensor can detect an object 0.1 m 2 0.328 ft, or more, away. 6.562 EQ-34W However, the detectable area of the Far (Main) setting Near (Sub) distance Near (Sub) type of the EQ-34W begins 1.5 distance L1 adjustable range L2 at 0.2 m 0.656 ft. 4.921 2 m 6.562 ft 1 to 2 m 3.281 to 6.562 ft Non-detectable 0.1 m 1.5 m 4.921 ft 0.85 to 1.5 m 2.789 to 4.921 ft range Actual sensing 2 m 1 0.328 ft 6.562 ft range of the sensor 3.281 1 m 3.281 ft 0.65 to 1 m 2.133 to 3.281 ft 0.2 m 0.656 ft 0.5 m 1.640 ft 0.35 to 0.5 m 1.148 to 1.640 ft Adjustable range 0.5 0.2 m 0.656 ft 0.2 m 0.656 ft 1.640 Sensing object 00.5 1 1.5 2 1.640 3.281 4.921 6.562 Far (Main) setting distance L1 (m ft) 3) Refer to ‘PRECAUTIONS FOR PROPER USE’ on p.262 for the details of the stability indicator. Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com 259 Environmental resistance Near (Sub) distance adjustable range L2 (m ft) Amplifier Built-in PHOTOELECTRIC SENSORS RX-LS200 RX EX-40 EQ-30 EQ-20 EX-10 EX-20 EX-30 CX-400 EQ-30 I/O CIRCUIT AND WIRING DIAGRAMS EQ-34� NPN output type I/O circuit diagram Wiring diagram Color code / Connector pin No. of the plug-in connector type D (Brown / 1) �V Brown / 1 Load � Load (Black / 4) Output 10 to 30 V DC Tr � Black / 4 � 10 to 30 V DC 100 mA max. � ZD (Blue / 3) 0 V Blue / 3 Internal circuit Users’ circuit Connector pin position (Plug-in connector type) Symbols ... D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Connector pin No. Tr : NPN output transistor 1 2 �V Not connected 4 3 Output 0 V EQ-34-PN� PNP output type I/O circuit diagram Wiring diagram Color code / Connector pin No. of the plug-in connector type (Brown / 1) �V Brown / 1 ZD Tr 100 mA max. � 10 to 30 V DC � Black / 4 (Black / 4) Output � 10 to 30 V DC � Load Load D (Blue / 3) 0 V Blue / 3 Internal circuit Users’ circuit Connector pin position (Plug-in connector type) Symbols ... D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Connector pin No. Tr : PNP output transistor 1 2 �V Not connected 4 3 Output 0 V EQ-34W� Two output type I/O circuit diagram Wiring diagram Color code D (Brown) �V Brown Far (Main) Load (Black) output Load Tr1 Load � Black 100 mA max. 10 to 30 V DC Load (White) Near (Sub) output ZD1 � � Tr2 10 to 30 V DC 100 mA max. � White ZD2 (Blue) 0 V Blue Internal circuit Users’ circuit Symbols ... D: Reverse supply polarity protection diode ZD1, ZD2: Surge absorption zener diode Tr1, Tr2: NPN output transistor Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com 260 RX-LS200 RX EX-40 EQ-30 EQ-20 EX-10 EX-20 EX-30 CX-400 PHOTOELECTRIC SENSORS Amplifier Built-in Sensor circuit Sensor circuit Sensor circuit EQ-30 SENSING CHARACTERISTICS (TYPICAL) EQ-34� EQ-34-PN� Sensing fields Emitted beam • Setting distance: 1 m 3.281 ft • Setting distance: 1.5 m 4.921 ft • Setting distance: 2 m 6.562 ft 2 6.562 White non- Black non-glossy White non- White non- Black non-glossy Black non-glossy glossy paper paper (Lightness: 5) glossy paper glossy paper paper (Lightness: 5) paper (Lightness: 5) 1 2 2 "46 mm 1.5 6.562 "1.811 in 3.281 6.562 4.921 "34 mm 1.5 "1.339 4.921 in 1 3.281 200�200 mm 200�200 mm 200�200 mm 1 "24 mm "0.945 in 0.5 1 7.874�7.874 in 7.874�7.874 in 7.874�7.874 in 3.281 1.640 3.281 Non-glossy paper Non-glossy paper Non-glossy paper 0.5 0.5 "17 mm "0.669 in # 1.640 # # L L L 1.640 0.2 "20 mm "0.787 in Sensor 0.656 Sensor Sensor 0 0 0 0 20 10 010 20 20 10 010 20 20 10 010 20 0.787 0.394 0.394 0.787 0.787 0.394 0.394 0.787 0.787 0.394 0.394 0.787 Left Center Right Left Center Right Left Center Right Operating point ?(mm in) Operating point ?(mm in) Operating point ?(mm in) Correlation between color (200�200 mm 7.874�7.874 in non-glossy paper) and sensing range Correlation between material (200�200 mm 7.874�7.874 in) and sensing range 2 2 6.562 6.562 These bars indicate the sensing range with the re- spective colors when the distance adjuster is set at These bars indicate the the sensing range of 2 m sensing range with re- 1 2 m 2 m 1 ··· 6.562 ft, 1 m 3.281 ft and ··· spective objects when the 3.281 6.562 ft 3.281 6.562 ft 0.2 m 0.656 ft long, each, distance adjuster is set at 1 m 1 m with white color. ··· ··· the sensing range of 2 m 3.281 ft 3.281 ft The sensing distance 6.562 ft, 1 m 3.281 ft and 0.2 m 0.2 m varies depending also on 0.2 m 0.656 ft long, each, ··· ··· 0.656 ft 0.656 ft material. with white non-glossy 0 0 paper. EQ-34W� Sensing fields • Far (Main) [Far (Main) setting distance: 1 m 3.281 ft] • Far (Main) [Far (Main) setting distance: 1.5 m 4.921 ft] • Far (Main) [Far (Main) setting distance: 2 m 6.562 ft] 2 6.562 White non- Black non-glossy White non- Black non-glossy White non- Black non-glossy glossy paper paper (Lightness: 5) glossy paper paper (Lightness: 5) glossy paper paper (Lightness: 5) 1 2 3.281 200�200 mm 1.5 6.562 200�200 mm 7.874�7.874 in 4.921 200�200 mm 7.874�7.874 in Non-glossy paper 7.874�7.874 in Non-glossy paper Non-glossy paper 1 # L 3.281 # L L # 0.5 NEAR MAIN FAR 1 SUB MODE DL NEAR MAIN FAR 1.640 SUB STB MAIN NEAR FAR 3.281 SUB MAIN MODE SUB MODE DL DL SUB STB MAIN Sensor SUB STB MAIN 0.5 Sensor Sensor 1.640 0 0 0 20 10 010 20 20 10 0 10 20 20 10 0 10 20 0.787 0.394 0.394 0.787 0.787 0.394 0.394 0.787 0.787 0.394 0.394 0.787 Left Center Right Left Center Left Center Right Right Operating point ?(mm in) Operating point ?(mm in) Operating point ?(mm in) Emitted beam • Near (Sub) [Far (Main) setting distance: 1 m 3.281 ft] • Near (Sub) [Far (Main) setting distance: 1.5 m 4.921 ft] • Near (Sub) [Far (Main) setting distance: 2 m 6.562 ft] 2 6.562 Black non-glossy Near (Sub) Black non-glossy Black non-glossy Near (Sub) adjuster max. paper (Lightness: 5) paper (Lightness: 5) paper (Lightness: 5) Near (Sub) adjuster max. 1 2 2 "46 mm 200�200 mm adjuster max. White 3.281 1.5 6.562 6.562 "1.811 in 7.874�7.874 in non-glossy Non-glossy paper 4.921 White 200�200 mm 200�200 mm paper White non-glossy 7.874�7.874 in 7.874�7.874 in non-glossy "34 mm 1.5 Non-glossy paper Non-glossy paper paper Near (Sub) # L paper "1.339 4.921 adjuster in 1 Near (Sub) Black NEAR FAR MAIN # min. SUB MODE Near (Sub) L DL L # adjuster non-glossy 3.281 SUB STB MAIN adjuster "24 mm "0.945 in 0.5 1 1 paper min. NEAR FAR NEAR FAR MAIN MAIN min. SUB MODE Sensor SUB MODE DL 3.281 1.640 DL 3.281 (Lightness: 5) SUB STB MAIN SUB STB MAIN Sensor 0.5 Sensor "17 mm "0.669 in 0.5 Black 1.640 Black 1.640 White non-glossy non-glossy White White 0.2 "20 mm "0.787 in non-glossy paper paper non-glossy non-glossy 0.656 paper paper (Lightness: 5) (Lightness: 5) paper 0 0 0 0 20 10 010 20 20 10 0 10 20 20 10 0 10 20 0.787 0.394 0.394 0.787 0.787 0.394 0.394 0.787 0.787 0.394 0.394 0.787 Left Center Right Left Center Right Left Center Right Operating point ?(mm in) Operating point ?(mm in) Operating point ?(mm in) Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com 261 Setting distance L (m ft) Setting distance L (m ft) Setting distance L (m ft) Sensing range L (m ft) White Yellow Orange Red Brown Green Blue Gray Black Setting distance L (m ft) Setting distance L (m ft) Setting distance L (m ft) Sensing range L (m ft) Setting distance L (m ft) Setting distance L (m ft) Setting distance L (m ft) White non- glossy paper Black non- glossy paper (Lightness: 5) Cardboard Plywood Black rubber Distance L (m ft) Distance L (m ft) Amplifier Built-in PHOTOELECTRIC SENSORS RX-LS200 RX EX-40 EQ-30 EQ-20 EX-10 EX-20 EX-30 CX-400 EQ-30 SENSING CHARACTERISTICS (TYPICAL) EQ-34W Correlation between color (200�200 mm 7.874�7.874 in non-glossy paper) and sensing range Correlation between material (200�200 mm 7.874�7.874 in) and sensing range 2 2 6.562 6.562 These bars indicate the sensing range with re- spective colors when the distance adjuster is set at 1 1 These bars indicate the 3.281 the sensing range of Far 3.281 sensing range with re- (Main) 2 m 6.562 ft and spective objects when Far (Main) Near (Sub) 1 m 3.281 ft Far (Main) ··· ··· the distance adjuster is 2 m 6.562 ft long, each, with white 2 m 6.562 ft set at the sensing range color. Near (Sub) Near (Sub) ··· ··· of Far (Main) 2 m 6.562 ft The sensing distance 1 m 3.281 ft 0 1 m 3.281 ft 0 and Near (Sub) 1 m varies depending also on 3.281 ft long, each, with material. white non-glossy paper. PRECAUTIONS FOR PROPER USE Refer to p.1135l for general precautions. M4 nut Mounting This product is not a safety sensor. Its use is not • The tightening torque intended or designed to protect life and prevent body M4 (length 25 mm 0.984 in) screw with washers should be 0.8 N�m or injury or property damage from dangerous parts of less. machinery. It is a normal object detection sensor. Stability indicator Sensor mounting blacket • Since the EQ-30 series uses a 2-segment photodiode as MS-EQ3-2 its receiving element, and sensing is done based on the (Optional) difference in the incident beam angle of the reflected beam from the sensing object, the output and the operation indicator operate according to the object distance. • Care must be taken regarding the sensor mounting Further, the stability indicator shows the margin of the direction with respect to the object’s direction of movement. incident light intensity and not that of the object distance. Hence, the distance at which it lights up/off depends on the object reflectivity and is not at all related to the output operation. Do not use the sensor when the stability indicator is off (unstable light received condition), since the sensing will be unstable. Sensor Setting distance Sensing Sensing Sensing object object object Do not make the sensor detect an object in this direction because it may cause unstable operation. Sensing Sensing Sensing object object object • When detecting a specular object (aluminum or copper foil) or an object having a glossy surface or coating, ON (Lights up) Output please take care that there are cases when the object may (operation indicator) OFF (Lights off) not be detected due to a small change in angle, wrinkles (In case of Detection-ON) Unstable light on the object surface, etc. received condition Lights up • When a specular body is present below the sensor, use Stability indicator Stable light Stable dark (Black non-glossy paper) received condition condition the sensor by tilting it slightly upwards to avoid wrong Lights off operation. Unstable light received condition Lights up Stability indicator Specular Stable dark Stable light received condition (White non-glossy paper) face condition Lights off Others Tilt • Do not use during the initial transient time (50 ms) after • If a specular body is present in the background, wrong the power supply is switched on. operation may be caused due to a small change in the angle of the background body. In that case, install the • When connecting the mating cable to the plug-in sensor at an inclination and confirm the operation with the connector type, the tightening torque should be 0.4N�m or actual sensing object. less. • Take care that some objects may produce a dead zone right in front of the sensor. Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com RX-LS200 RX EX-40 EQ-30 EQ-20 EX-10 EX-20 EX-30 CX-400 PHOTOELECTRIC SENSORS Amplifier Built-in Sensing range L (m ft) White Yellow Orange Red Brown Green Blue Gray Black Sensing range L (m ft) White non- glossy paper Black non- glossy paper (Lightness: 5) Cardboard Plywood Black rubber EQ-30 PRECAUTIONS FOR PROPER USE Refer to p.1135l for general precautions. Notes: 1) Turn the distance adjuster gradually and lightly with the attached Distance adjustment screwdriver. EQ-34W If the distance adjuster is over turned or pressed heavily, it may be damaged. Notes: 2) The Far (Main) distance adjustment should be done before the Near (Sub) distance adjustment. Take care that the Near (Sub) Far (Main) adjuster indicator Far (Main) distance adjuster (2-turn) setting distance changes with change in the Far (Main) setting Shows how much the () distance adjuster is rotated. The sensing range distance. Near (Sub) distance adjuster increases as it is () turned clockwise. EQ-34W The sensing range increases as it is turned Near (Sub) Far (Main) () NEAR FAR Operation mode switch clockwise. MAIN setting distance setting distance L : Detection-ON SUB Near (Sub) output MODE D : Detection-OFF operation indicator (Red) DL (Turn the switch fully.) Near object Far object Lights up when the Near (Sub) [] output is ON. ON Far (Main) output Far (Main) output Stability indicator (Green) SUB STB MAIN operation indicator (Red) In case of Lights up under stable OFF ( Lights up when the Far Detection ON Far (Main) distance adjustable range light received condition or [] () (Main) output is ON. stable dark condition. (0.2 to 2 m 0.656 to 6.562 ft) ON Near (Sub) output In case of OFF ( Detection OFF Far (Main) Near (Sub) distance Near (Sub) distance adjuster set at the adjustable range maximum. Step Description Distance adjuster Turn the Far (Main) distance adjuster fully NEAR FAR MAIN 1 counterclockwise to the minimum sensing point of EQ-34, EQ-34-PN 0.2 m 0.656 ft approx. Turn fully Distance adjuster A Place an object at the far place at the required (2-turn) Adjuster indicator distance from the sensor, turn the Far (Main) The sensing range Shows how much increases as it is 2 distance adjuster gradually clockwise, and find out the distance NEAR FAR ( ) () MAIN turned clockwise. adjuster is rotated. point where the sensor changes to the light @ Operation mode switch received condition. NEAR FAR L : Detection ON : Detection OFF D Remove the object, turn the Far (Main) distance (Turn the switch fully.) D L adjuster further clockwise, and find out point b A Operation indicator Stability indicator (Green) where the sensor changes to the light received (Red) Lights up under stable condition again with only the background. Lights up when the 3 NEAR FAR light received condition () MAIN output is ON. ( ) When the sensor does not go to the light or stable dark condition. B received condition even if the adjuster is fully turned clockwise, point is this extreme point b () in the range. A The optimum position to stably detect objects for Optimum position 4 the Far (Main) setting is the center point between NEAR FAR MAIN Step Description Distance adjuster and . B @ b Near (Sub) Turn the distance adjuster fully counterclockwise to 1 the minimum sensing range position of 0.2 m 0.656 ft NEAR FAR approx. Step Description Distance adjuster Turn fully SUB A Place an object at the required distance from the Turn the Near (Sub) distance adjuster fully 5 sensor, turn the distance adjuster gradually 2 counterclockwise to the minimum sensing point. clockwise, and find out point where the sensor @ NEAR FAR Turn fully changes to the light received condition. Place an object at the near position, at the required Remove the object, turn the distance adjuster distance from the sensor, turn the Near (Sub) SUB C further counterclockwise, and find out point b 6 A distance adjuster gradually clockwise, and find out where the sensor changes to the light received point where the sensor changes to the light c condition again with only the background. received condition. 3 B When the sensor does not go to the light NEAR FAR received condition even if the adjuster is fully Remove the object from the near position, and place turned clockwise, point is this extreme point b the object for Far (Main) sensing at the sensing () in the range. position. Turn the Near (Sub) distance adjuster further SUB clockwise, and find out point where the sensor d C A 7 changes to the light received condition again with only Optimum the background. The optimum position to stably detect objects is the position 4 D When the sensor does not go to the light center point between and . @ b B NEAR FAR received condition even if the adjuster is fully () turned clockwise, point is this extreme point. d SUB Note: Turn the distance adjuster gradually and lightly with the attached C The optimum position to stably detect objects for screwdriver. Optimum 8 the Near (Sub) setting is the center point between position If the distance adjuster is over turned or pressed heavily, it may be and . c d damaged. D Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com 263 Amplifier Built-in PHOTOELECTRIC SENSORS RX-LS200 RX EX-40 EQ-30 EQ-20 EX-10 EX-20 EX-30 CX-400 ( ( EQ-30 DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website EQ-34 EQ-34W Sensor Sensor EQ-34-PN Far (Main) distance adjuster Operation mode switch Distance adjuster (2-turn) Operation mode switch (2-turn) Far (Main) output operation Far (Main) adjuster indicator indicator (Red) Stability indicator (Green) Stability indicator (Green) Operation indicator (Red) Adjuster indicator Near (Sub) distance adjuster Near (Sub) output operation 2 indicator (Red) 20 0.079 40 2-M4 nut seats (on both sides) Beam- 0.787 1.575 receiving 2-"4.5 "0.177 mounting holes part 2 20 0.079 40 2-M4 nut seats (on both sides) Beam- 0.787 1.575 receiving 2-"4.5 "0.177 mounting holes part 52 Center of 68 2.047 sensing 2.677 "5.8 "0.228 cable, 6 0.236 2 m 6.562 ft long 52 Center of 68 Beam- 2.047 sensing 2.677 15 "5.8 "0.228 cable, emitting 6 0.591 0.236 2 m 6.562 ft long part 17 18 Beam- 5 15 0.709 0.669 emitting 0.197 0.591 part 17 18 5 0.669 0.709 0.197 EQ-34-J Sensor EQ-34-PN-J Operation mode switch Distance adjuster (2-turn) Stability indicator (Green) Operation indicator (Red) Adjuster indicator 2-M4 nut seats (on both sides) 2 20 40 0.079 2-"4.5 "0.177 mounting holes 0.787 1.575 Beam- receiving part 68 68 Center 52 2.677 2.677 2.047 of sensing Beam- emitting 15 part 0.591 9.5 0.374 5 0.197 M12 connector "14.5 "0.571 32 1.260 17 18 0.669 0.709 MS-EQ3-1 Sensor mounting bracket (Optional) Assembly dimensions Mounting drawing with EQ-34 t 2 t 0.079 54 2.126 27 17.5 1.063 0.689 18 0.709 23 22 0.906 54 2.126 11.5 0.866 42 1.654 9 0.453 12 t 2 t 0.079 10� 22 0.472 0.354 0.866 10° (1.5) 4.5 Beam- 0.177 (0.059) receiving 6.4 part R55 6 6 0.252 R2.165 0.236 0.236 45 30 46 58 69 6 0.236 45 69 1.772 1.181 1.811 2.283 2.717 Center 1.772 2.717 19.5 of sensing 0.768 19.5 0.768 Beam- 6.4 0.252 emitting 4-"4.5 "0.177 5 5 6.4 0.252 part 0.197 0.197 12 Material: Cold rolled carbon steel (SPCC) 0.472 22 Two M4 (length 25 mm 0.984 in) screws with washers 0.866 and two M4 nuts are attached. Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com RX-LS200 RX EX-40 EQ-30 EQ-20 EX-10 EX-20 EX-30 CX-400 PHOTOELECTRIC SENSORS Amplifier Built-in NEAR NEAR FAR FAR NEAR FAR D D L L D L NEAR FAR MAIN SUB MODE DL SUB STB MAIN NEAR NEAR FAR FAR D D L L EQ-30 DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website MS-EQ3-2 Sensor mounting bracket (Optional) Assembly dimensions Mounting drawing with EQ-34 5.2 0.205 12 0.472 22 0.866 5.2 22 42 6.4 0.205 " 6.4 " 0.252 hole 0.866 12 30 1.654 0.252 22 0.472 1.181 0.866 45 1.772 6 0.236 6.4 " 6.4 " 0.252 hole 10� 0.252 30 4.5 0.177 1.181 R55 45 R2.165 1.772 30 52 10° (1.5) 76 1.181 2.047 2.992 Beam- (0.059) receiving t 2 part 25 t 0.079 12.5 0.984 0.492 Center 76 10 of sensing 2.992 2-"4.5 "0.177 0.394 18 0.709 26 22.5 1.024 0.886 Beam- emitting part Material: Cold rolled carbon steel (SPCC) t 2 Two M4 (length 25 mm 0.984 in) screws with washers t 0.079 and two M4 nuts are attached. Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com 265 NEAR NEAR FAR FAR D D L L Amplifier Built-in PHOTOELECTRIC SENSORS RX-LS200 RX EX-40 EQ-30 EQ-20 EX-10 EX-20 EX-30 CX-400