Elite.Parts

Description

Sunpower SDX-6200-24 Power Supply - 1U Size Power Supply, DC-DC, Six Output, 200W for 1U System (DC Input), (24V)

Part Number

SDX-6200-24

Price

Request Quote

Manufacturer

SUNPOWER

Lead Time

Request Quote

Category

PARTS

Specifications

Cooling

Forced airflow cooling with DC fan

Dimension

180 x 100 x 40.5 mm (L*W*H)

Efficiency (TYP.)

68%

M.T.B.F.

142K hours

Output MAX.

3.3V & 5V total output maximum 130W, -5V & -12V total output max 12W, Total output maximum 200W.

Power good signal

Power ON within 100---500ms, high level TTL Signal release

Protection

Ceramic Fuse, 20A/250V

Voltage

19V ~ 32V DC (Typical 24V)

Features

100% full load burn-in test
Input and output isolation
Meet Intel ATX 2.01 / ATX 2.03 / ATX 12V / EPS
Meet LVD standard
Over load & short circuit protection
Over voltage protection
Soft start function, low inrush current
UL, cUL, CB, CE approved

Datasheet

Sunpower-SDX-6200 Series-Power Supplies-datasheet1-1763422540.pdf

341 KiB

Download

Extracted Text

SUNPOWER TECHNOLOGY CORP. 16F.-1, No.150, Jian 1st Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.). TEL: 886-2-8226-3100 FAX: 886-2-8226-3111 http://www.sunpower.com.tw E-mail: sunpower@sunpower.com.tw SDX-6200-24 180 x 100 x 40.5 mm 200W, Six Output 7.09 x 3.94 x 1.60 inch Industrial 1U System CB Features: ＊ Input and output isolation ＊ Soft start function, low inrush current ＊ Over voltage protection ＊ Over load & short circuit protection ＊ 100% full load burn-in test ＊ Meet Intel ATX 2.01 / ATX 2.03 / ATX 12V / EPS ＊ Meet LVD standard ＊ UL, cUL, CB, CE approved ＊ 1 year warranty Specification: Voltage 19V ~ 32V DC (Typical 24V) INPUT Current <16A @ 19V DC input. Protection Ceramic Fuse, 20A/250V OUTPUT V1 V2 V3 V4 V5 V6 Voltage 5V 3.3V 12V -5V -12V 5Vsb 0.5A 0.1A 0.2A 0A 0A 0A Min Load Max Load 25A 15A 12A 0.5A 1A 19V~23V: 1A OUTPUT 24V~32V: 1.5A Output Tolerance 2 ±5% ±5% ±5% ±5% +8/-5% ±5% Ripple Noise MAX. 3 70mV 70mV 120mV 100mV 200mV 70mV Efficiency (TYP.) 68% 3.3V & 5V total output maximum 130W, -5V & -12V total output max 12W, Total output maximum 200W. Output MAX. Over Voltage 5.8V~7.0V 3.8V~4.6V 13.8~16.8V --- --- --- Shutdown, it needs re-power on to recover PROTECTION When power supply over 105%~ 150% max load or short circuit acted, power supply will be shutdown and recover Over Load ＆ Short Circuit automatically after the fault is removed. Rise time <20mS ELEC. CHAR. Power good signal Power ON within 100---500ms, high level TTL Signal release. Temperature 4 Operating: -10 ~ 70℃ ; De-rating: 45 ~ 70℃℃ : 2.5%/ ; Storage: -20~+85℃ ENVIRONMENT Humidity Operating: 20% ~ 90% (non condensing) RH; Storage: 10% ~ 95% RH (non condensing) SAFETY Withstand voltage I/P-O/P:2.0KVAC, I/P-PE:1KVAC, 1minute Isolation resistance I/P-O/P, I/P-PE, ＞100MΩ/500VDC at 25℃/ 70% RH EN 55022 CLASS B、FCC CFR 47 PART 15 CLASS B、CNS 13438 CLASS B. EMC EMI EMS EN 55024：EN 61000-4-2,3,4,6,8；ENV 50204 Cooling Forced airflow cooling with DC fan M.T.B.F. 142K hours OTHERS Dimension 180 x 100 x 40.5 mm (L*W*H) Packing N.W.: 1.98 Kg / 1pc; 6 pcs / 1.44 CUFT / 1 CTN 1 All measurements which not mentioned are based on 24VDC input, output Max at ambient 25℃ / 70%RH. 2 Output tolerance included set up voltage, line regulation and load regulation. The regulation is measured at the condition：when any of output is with 20% ~ 100% max load and the rest of each outputs are with NOTE 60% max load, Each output could work within max load but must under total output max. 3 Ripple & noise are measured at 21～32VDC input with 10～50℃ condition and 20MHz of bandwidth by terminated using a 10〞～15〞twisted pair-wire with a 0.1uF & a 47uF parallel capacitor. 4 The operating temperature shall follow the de-rating curve in spec 5 The power supply is considered a component of end-equipment. The end-equipment must be re-confirmed whether comply with EMC directives. Copy Right Sunpower Technology Corp. 2009, All Rights Reserved. SDX-6200-24 Rev 1.1 Specifications subject to change without notice. RS-090156 JULY-20-2009 QR0405-1 Rev,:1.0 SUNPOWER TECHNOLOGY CORP. 16F.-1, No.150, Jian 1st Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.). TEL: 886-2-8226-3100 FAX: 886-2-8226-3111 http://www.sunpower.com.tw E-mail: sunpower@sunpower.com.tw SDX-6200-24 De-rating Curve： Output De-rating Vs Input Voltage Ta=25 100 100 90 80 80 60 70 60 40 50 20 40 19 24 32 (HORIZONTAL) -10 0 10 20 30 40 50 60 70 INPUT VO LTAG E (VDC) AMBIENT TEMPERATURE( ) Dimension: (Unit: mm) OUTPUT WIR E MOLEX 5557-20R +5V RED 20 10 +12V YELLOW +5Vs PINK 19 9 +5V RED +5Vsb PURPLE -5V WHITE 18 8 P.G. GREY COM BLACK 17 7 COM BLACK COM BLACK 16 6 + 5V RED COM BLACK 15 5 COM BLACK 14 4 PS ONGREEN + 5V RED COM BLACK 13 3 COM BLACK -12V BLUE 12 2 +3.3V ORANGE 11 1 +3.3Vs BROWN +3.3V ORANGE +3.3V ORANGE MOLEX 5557-4R +12V YELLOW 42 COM BLACK +12V YELLOW 3 1 COM BLACK STM-P113914 +12VYELLOW COMBLACK COMBLACK +5V RED MOLEX 8981-4P +12V YELLOW COMBLACK COMBLACK +5V RED MOLEX 8981-4P YELLOW +12V COMBLACK COMBLACK +5V RED MOLEX 8981-4P +12V YELLOW COMBLACK COMBLACK +5V RED MOLEX 8981-4P +12V YELLOW COMBLACK COMBLACK +5V RED MOLEX 8981-4P +12V YELLOW COMBLACK 24V IN COMBLACK +V -V +5V RED Copy Right Sunpower Technology Corp. 2009, All Rights Reserved. SDX-6200-24 Rev 1.1 Specifications subject to change without notice. RS-090156 JULY-20-2009 QR0405-1 Rev,:1.0 LOAD(%) LOAD(%) SUNPOWER TECHNOLOGY CORP. 16F.-1, No.150, Jian 1st Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.). TEL: 886-2-8226-3100 FAX: 886-2-8226-3111 http://www.sunpower.com.tw E-mail: sunpower@sunpower.com.tw SDX-6200-48 SDX-6250-48 180 x 100 x 40.5 mm 200/250W, Six Output 7.09 x 3.94 x 1.60 inch 205 x 100 x 40.5 mm Industrial 1U System 8.07 x 3.94 x 1.60 inch CB Features: ＊ Input and output isolation ＊ Soft start function, low inrush current ＊ Over voltage protection ＊ Over load & short circuit protection ＊ 100% full load burn-in test ＊ Meet Intel ATX 2.01 / ATX 2.03 / ATX 12V / EPS ＊ Meet LVD standard ＊ UL, cUL, CB, CE approved ＊ 1 year warranty Specification: Model No. SDX-6200-48 SDX-6250-48 Voltage 36V ~ 72V DC (Typical 48V) 40V ~ 65V DC (Typical 48V) INPUT Current <8.4A @ 36V DC input. <9A @ 40V DC input. Protection Ceramic fuse, 12A/250V Ceramic fuse, 12A/250V OUTPUT V1 V2 V3 V4 V5 V6 V1 V2 V3 V4 V5 V6 Voltage 5V 3.3V 12V -5V -12V 5Vsb 5V 3.3V 12V -5V -12V 5Vsb Min Load 0.5A 0.1A 0.2A 0A 0A 0A 2A 0.1A 0.2A 0A 0A 0A Max Load 25A 15A 12A 0.5A 1A 2A 28A 20A 16A 0.5A 1A 2A Output Tolerance 2 ±5% ±5% ±5% ±5% +8/-5% ±5% ±5% ±5% ±5% ±5% +8/-5% ±5% OUTPUT Ripple Noise MAX. 3 70mV 70mV 120mV 100mV 200mV 70mV 70mV 70mV 120mV 100mV 200mV 70mV Efficiency (TYP.) 67% 70% Output MAX. SDX-6200-48 3.3V & 5V total output max 130W, -5V & -12V total output max 12W, Total output max 200W SDX-6250-48 3.3V & 5V total output max 140W, -5V & -12V total output max 12W, Total output max 250W 5.8V~ 3.8V~ 13.8~ 5.8V~ 3.8V~ 13.8~ Over Voltage --- --- --- --- --- --- 7.0V 4.6V 16.8V 7.0V 4.6V 16.8V PROTECTION Shutdown, it needs re-power on to recover When power supply over 105%~ 150% max load or short circuit acted, power supply will be shutdown and recover Over Load ＆ Short Circuit automatically after the fault is removed. Rise time <20mS ELEC. CHAR. Power good signal Power ON within 100---500ms, high level TTL Signal release. Temperature 4 Operating: -10 ~ 70℃ ; De-rating: 45 ~ 70℃℃ : 2.5%/ ; Storage: -20~+85℃ ENVIRONMENT Humidity Operating: 20% ~ 90% (non condensing) RH; Storage: 10% ~ 95% RH (non condensing) SAFETY Withstand voltage I/P-O/P:2.0KVAC, I/P-PE:1KVAC, 1minute Isolation resistance I/P-O/P, I/P-PE, ＞100MΩ/500VDC at 25℃/ 70% RH EN 55022 CLASS B、FCC CFR 47 PART 15 CLASS B、CNS 13438 CLASS B. EMC EMI EMS EN 55024：EN 61000-4-2,3,4,6,8；ENV 50204 Cooling Forced airflow cooling with DC fan M.T.B.F. 142K hours 138K hours OTHERS Dimension 180 x 100 x 40.5 mm (L*W*H) 205 x 100 x 40.5 mm (L*W*H) Packing N.W.: 1.98 Kg / 1pc; 6 pcs / 1.44 CUFT / 1 CTN 1 All measurements which not mentioned are based on 48VDC input, output Max at ambient 25℃ / 70%RH. 2 Output tolerance included set up voltage, line regulation and load regulation. The regulation is measured at the condition：when any of output is with 20% ~ 100% max load and the rest of each outputs are with NOTE 60% max load, Each output could work within max load but must under total output max. 3 Ripple & noise are measured at 40～72V/40～65VDC input with 10～50℃ condition and 20MHz of bandwidth by terminated using a 10〞～15〞twisted pair-wire with a 0.1uF & a 47uF parallel capacitor. 4 The operating temperature shall follow the de-rating curve in spec 5 The power supply is considered a component of end-equipment. The end-equipment must be re-confirmed whether comply with EMC directives. Copy Right Sunpower Technology Corp. 2009, All Rights Reserved. SDX-6200&6250-48 Rev 1.1 Specifications subject to change without notice. RS-090157 JULY-20-2009 QR0405-1 Rev,:1.0 SUNPOWER TECHNOLOGY CORP. 16F.-1, No.150, Jian 1st Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.). TEL: 886-2-8226-3100 FAX: 886-2-8226-3111 http://www.sunpower.com.tw E-mail: sunpower@sunpower.com.tw SDX-6200-48 SDX-6250-48 De-rating Curve： Output De-rating Vs Input Voltage SDX-6200-48 SDX-6250-48 Ta=25 Ta=25 100 100 100 90 90 80 80 80 60 70 70 40 60 60 50 20 50 40 40 (HORIZONTAL) -10 0 10 20 30 40 50 60 70 36 40 72 40 65 INPUT VOLTAGE (VDC) INPUT VOLTAGE (VDC) AMBIENT TEMPERATURE( ) Dimension: (Unit: mm) SDX-6200 OUTPUT WIR E MOLEX 5557-20R +5V RED 20 10 +12V YELLOW +5Vs PINK +5V RED 19 9 +5Vsb PURPLE -5V WHITE 18 8 P.G. GREY COM BLACK 17 7 COM BLACK 16 6 COM BLACK + 5V RED COM BLACK 15 5 COM BLACK PS ONGREEN 14 4 + 5V RED 13 3 COM BLACK COM BLACK -12V BLUE 12 2 +3.3V ORANGE +3.3Vs BROWN 11 1 +3.3V ORANGE +3.3V ORANGE MOLEX 5557-4R +12V YELLOW 42 COM BLACK +12V YELLOW 3 1 COM BLACK STM-P113914 +12VYELLOW COMBLACK COMBLACK +5V RED MOLEX 8981-4P +12V YELLOW COMBLACK COMBLACK +5V RED MOLEX 8981-4P +12V YELLOW COMBLACK COMBLACK +5V RED MOLEX 8981-4P +12V YELLOW COMBLACK COMBLACK +5V RED MOLEX 8981-4P +12V YELLOW COMBLACK COMBLACK +5V RED MOLEX 8981-4P +12V YELLOW COMBLACK 24V IN COMBLACK +V -V +5V RED Copy Right Sunpower Technology Corp. 2009, All Rights Reserved. SDX-6200&6250-48 Rev 1.1 Specifications subject to change without notice. RS-090157 JULY-20-2009 QR0405-1 Rev,:1.0 LOAD(%) LOAD(%) LOAD(%) SUNPOWER TECHNOLOGY CORP. 16F.-1, No.150, Jian 1st Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.). TEL: 886-2-8226-3100 FAX: 886-2-8226-3111 http://www.sunpower.com.tw E-mail: sunpower@sunpower.com.tw SDX-6200-48 SDX-6250-48 SDX-6250 MOLEX 5557-20R +5V RED 20 10 +12V YELLOW +5V RED 19 9 +5Vsb PURPLE 18 8 -5V WHITE P.G. GREY COM BLACK 17 7 COM BLACK COM BLACK 16 6 + 5V RED COM BLACK 15 5 COM BLACK 14 4 PS ON GREEN + 5V RED 13 3 COM BLACK COM BLACK -12V BLUE 12 2 +3.3V ORANGE +3.3V ORANGE 11 1 +3.3V ORANGE MOLEX 5557-4R +12V YELLOW 4 2 COM BLACK +12V YELLOW 3 1 COM BLACK STM-P113914 +12V COM COM +5V MOLEX 8981-4P +12V COM COM +5V MOLEX 8981-4P +12V COM COM +5V MOLEX 8981-4P +12V COM COM +5V MOLEX 8981-4P +12V COM COM +5V M O L E X 8981-4P +12V COM COM +5V Copy Right Sunpower Technology Corp. 2009, All Rights Reserved. SDX-6200&6250-48 Rev 1.1 Specifications subject to change without notice. RS-090157 JULY-20-2009 QR0405-1 Rev,:1.0

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products