PMD1204PQB1-A(2) F - SUNON

Description

Part Number

PMD1204PQB1-A(2) F

Price

Request Quote

Manufacturer

SUNON

Lead Time

Request Quote

Category

FANS AND BLOWERS

Specifications

Air Delivery

19CFM

Bearing System

Precise ball bearing system

Direction of Rotation

Counter-clockwise viewed front fan blade

Locked Rotor Protection

Automatic Restart Capability

Noise Level

45dB(A)

Operating Temperature

-10 to +70 Deg.C

Operating Voltage

10.2-13.8VDC

Rated Current

0.33 AMP

Rated Power

4.0WATTS

Rated Speed

11300RPM±1000RPM

Rated Voltage

12VDC

Starting Voltage

5VDC

Static Pressure

0.80 Inch-H20

Storage Temperature

-40 to +70 Deg.C

Weight

40g

Features

Air performance: Measured by a double chamber. The values are recorded when the fan speed is stabilized at rated voltage.
Applied AC 500V for one minute or AC 600V for 2 seconds between housing and lead wire(+).
Input Power/ Current Speed measured after continuous 30 minutes operation at rated voltage in clean air at ambient temperature of 25 degrees C.
Measures in a semi-anechoic chamber with background noise level below 15 dB(A). The fan is running in free air with microphone at a distance of one meter from the fan intake.
More than 10 M ohm between internal stator and lead wire(+)measured by DC 500V.
Patented single-coil DC brushless 4 poles motor design.
Polarity protected and Locked rotor protected.
Tolerances:±15% on rated power and current.

Datasheet

Sunon-PMD1204PQB1-A(2).F-datasheet1-1019598357.pdf

180 KiB

Download

Extracted Text

SUNON SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION : DC BRUSHLESS FAN DIMENSIONS : 40X40X28 mm M O D E L : PMD1204PQB1-A P/N : (2).F APPROVED NO : APPROVED BY : (AUTHORZIED) SPEC.NO Y108047 ISSUE DATE 08.30.2002 DAWN. Fanny 8/30 CHKD. APPD. EDITION 0 REVISE DATE E.SPEC ES02080024 建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. 12FL., 120 CHUNG CHENG 1ST RD., TEL:886-7-7163069(41 LINES) KAOHSIUNG, TAIWAN, R. O. C. FAX:886-7-7163086~89 SUNON DC BRUSHLESS FAN MODEL: PMD1204PQB1-A P/N : (2).F CHARACTERISTICS 1. Motor Design : Patented single-coil DC brushless 4 poles motor design. 2. Insulation Resistance : More than 10M ohm between internal stator and lead wire(+) measured by DC 500V. 3. Dielectric Strength : Applied AC 500V for one minute or AC 600V for 2 seconds between housing and lead wire(+) 4. Noise Level : Measured in a semi-anechoic chamber with background noise level below 15 dB(A). The fan is running in free air with microphone at a distance of one meter from the fan intake. 5. Input power, Current & Speed : Measured after continuous 30 minutes operation at rated voltage in clean air at ambient temperature of 25 degrees C. 6. Tolerances : ±15% on rated power and current. 7. Motor Protection : Polarity protected & Locked rotor protected. 8. Air Performance : Measured by a double chamber. The value are recorded when the fan speed is stabilized at rated voltage. SPEC.NO Y108047 REVISE DATE 建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司 ISSUE DATE 08. 30. 2002 E D I T I O N 0 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 2 OF 8 SUNON SPECIFICATIONS MODEL: PMD1204PQB1-A P/N : (2).F 1-1. Rated Voltage : 12 VDC 1-2. Operating Voltage Range : 10.2-13.8 VDC 1-3. Starting Voltage : ℃℃℃℃ 5 VDC(25 POWER ON/OFF) 1-4. Rated Speed : 11300 RPM ± 1000 RPM 1-5. Air Delivery : 19 CFM 1-6. Static Pressure : 0.80 Inch-H O 2 1-7. Rated Current : 0.33 AMP 1-8. Rated Power : 4.0 WATTS 1-9. Noise Level : 45 dB(A) 1-10. Direction of Rotation : Counter-clockwise viewed front fan blade 1-11. Operating Temperature : -10 to +70 Deg.C 1-12. Storage Temperature : -40 to +70 Deg.C 1-13. Bearing System : Precise ball bearing system 1-14. Weight : 40 g 1-15. Vibration : Vibration of acceleration 1.5G and Frequency 5~50~5Hz is applied in the 3 directions(X,Y,Z) for 30 minutes, each Direction at the cycle of 1 minute. 1-16. Locked Rotor Protection : Automatic Restart Capability SPEC.NO Y108047 REVISE DATE 建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司 ISSUE DATE 08. 30. 2002 E D I T I O N 0 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 3 OF 8 SUNON MODEL : PMD1204PQB1-A P/N : (2).F PERFORMANCE CURVES STATIC PRESSURE mm-H2O Inch-H2O 24 0.80 12 VDC 16 0.40 8 CFM 0 0 10 20 0 0.28 0.56 3 m /min SPEC.NO Y108047 REVISE DATE 建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司 ISSUE DATE 08. 30. 2002 E D I T I O N 0 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 4 OF 8 SUNON MATERIAL 2-1. Frame : Thermoplastic PBT of UL 94V-0 2-2. Impeller : Thermoplastic PBT of UL 94V-0 2-3. Bobbin : Thermoplastic PBT of UL 94V-0 2-4. Lead Wire : UL2468,26AWG,+RED;-BLACK UL1007,26AWG,YELLOW:3rd wire DIMENSIONS 1.Air Flow Direction: Label side. 2.The Best Mounting Direction: In any orientation. :: UNITS::mm SPEC.NO Y108047 REVISE DATE 建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司 ISSUE DATE 08. 30. 2002 E D I T I O N 0 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 5 OF 8 SUNON T1 T2 T3 T4 T=1 Rotation T=T1+T2+T3+T4 =(1 Rotation) 60 T1=T2=T3=T4= 4 × rpm SPEC. NO. Y108047 REVISE DATE 建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司 ISSUE DATE 08. 30. 2002 E D I T I O N 0 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 6 OF 8 SUNON rd FAN 3 WIRE Fan with driver IC: R Type (Rotation Detector) F Type (Frequency Generator) rd rd 3 wire signal : 3 wire signal : Run :V Run :Square Wave L Locked :V Locked :V H H t :F Type has open collector circuit t :Locked protection by cut-off run current (I ) 3 1 R t :Auto-restart by sending starting current (Is) designed for rpm measurement. 2 SPEC.NO Y108047 REVISE DATE 建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司 ISSUE DATE 08. 30. 2002 E D I T I O N 0 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 7 OF 8 SUNON Notes 1. SUNON will not guarantee the products if the application conditions exceed those set out in this specification. 2. A written request should be submitted to SUNON prior to acceptance if deviation from this specification is required. 3. Caution should be exercised when handling the fan. Damages may be resulted when apply pressure to the impeller or hold the fan by the lead wires. 4. No guarantee on the products against the safety problem or failure caused by powder dust, drop of water or insect. 5. This specification sheet precedes all other information and should be used as the principal reference for the product to which it refers. 6. To satisfy the SUNON Management Information System, please indicate SPEC. NO. on every order. 7. It is important that the correct polarity is established before connecting the fan to the electrical supply. Black (0V) , Red(+V). If cautions is not taken, immediate damage may occur on fans that do not have polarity protection. 8. SUNON fans are not suitable to be used in an environment that contains aggressive or corrosive fluids. 9. Always ensure that fans are stored according to the storage temperatures specified. Do not store in an environment with a high humidity level. If the fans were stored for longer than 6 months, it is highly recommended to apply functional testing before shipping. 10.Not all fans incorporate the Lock Rotor Protection feature. For fans that do not incorporate this feature it is important not to prevent the rotation of the impeller. Doing so, will lead to failure. 11.During installation, caution should be taken when mounting the fan. Incorrect mounting can cause excess resonance, vibration and noise. 12.During testing it is important to consider safety at all times. A suitable guard should be fitted to the fan to prevent personal injury. 13.Unless otherwise stated, all tests are carried out at relative temperature and humidity conditions of 25℃℃℃℃ , 65%. SPEC.NO Y108047 REVISE DATE 建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司建準電機工業股份有限公司 ISSUE DATE 08. 30. 2002 E D I T I O N 0 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 8 OF 8

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products