STEGO LCF 013 01300.0-00
Description
STEGO LCF 013 01300.0-00 Air-Flow Monitor. Switch Function: 1NC | Fan Flow Rate: 3.3ft/sec | For Use With: Fans | Switching Current
Part Number
LCF 013 01300.0-00
Price
Request Quote
Manufacturer
STEGO
Lead Time
Request Quote
Category
PRODUCTS - 0
Features
- Easily installs via clip or clamp
- Reliable mechanical switch contact
- Small size
- Versatile fields of application
Datasheet
Extracted Text
Fan & Filter Fan Air-flow Monitor LC 013 / LCF 013 Reliable mechanical switch contact Small size Easily installs via clip or clamp Versatile fields of application The LC 013/LCF 013 air-flow monitor provides a simple but reliable alternative to indicate positive or negative air flow of fans. When properly installed and connected in series with an optical (i.e. LED) or audible signaling device, a bi-directional switch will activate an electrical contact if the air flow of the fan falls below Photo enlarged 8.2 ft/s, thus either turning the signaling device on or off. Technical Data LC 013 / LCF 013 Reed / magnet contact Contact type: Application: The LC 013 air-flow monitor can be used in combination with optical or audible NC (normally closed) Contact open with air flow signaling devices (such as LED’s or alarms), or remote monitoring devices. It should be Contact closed with air flow NO (normally open) connected: Switching threshold A) in series directly with the signaling device itself, if the power of the connected device does >8.2 ft/s (2.5 m/s) of air flow speed: not exceed the electrical ratings of the LC 013 as listed, or Hysteresis: 3.3 ft/s (1 m/s) - fixed B) to the pilot switch side of a relay (i.e. our SM 010), if the signaling device to be switched exceeds the electrical ratings of the LC 013 and needs to be switched via relay. In this case, a Contact resistance incl. wire: 370mW Service life: > 100,000 cycles properly sized relay should be specified by the customer for the specific application/device. Max. switching capacity: 10W (resistive load) Max. switching voltage: NC: DC 240 V / NO: DC 60 V Please refer to the table shown below to ensure the correct contact type (NC-normally closed or NO-normally open) suitable for the application. Max. switching current: NC: DC 500mA / NO: DC 170mA Connection: 2 x single strand AWG 26, length 500 mm, tip of Installation notes: stranded wire stripped/tinned (5 mm) To avoid possible interference problems, a suitable distance from the following must be Mounting: Attachment clamp and/or clip, guaranteed, preferably through prior testing: or integrated in protective grill (see below) · magnets (permanent magnets) and ferrous metals (e.g. sheet metal) Housing: Plastic, UL94H-B, black · electromagnetic fields and inductive loads (e.g. caused by transformers, motors, etc.) Dimensions: 1.3 x 0.7 x 0.3” (34 x 17.5 x 7.5 mm) Mounting position: Air-flow monitor opening perpendicular to air flow The air-flow monitor must be positioned directly in the air flow in a dust-free and Operating/storage temperature: -4 to 122°F (-20 to 50°C) / -4 to 176°F (-20 to 80°C) contamination-free environment. Avoid installing in areas where air pockets or turbulence Protection type: IP 20 can be expected. Agency approvals: UL and VDE Weight Flap Position Contact Protective (approx.) Description Recommended use Part No. Grill Dimensions £ 8.2 ft/s >8.2 ft/s £ 8.2 ft/s >8.2 ft/s NC - normally closed LC 013 01300.0-00 1.3 x 0.7 x 0.3” 0.2 oz. no Use to turn an alarm or LCF 013 01301.0-00 3.15 x 3.15 x 0.4” 0.7 oz. Contact opens ü signaling device ON to indicate when air flow LCF 013 01302.0-00 ü 3.6 x 3.6 x 0.4” 0.7 oz. loss of air flow (£ 8.2 ft/s) Open Closed LCF 013 01303.0-00 ü 4 .7 x 4.7 x 0.4” 1.1 oz. > 8.2 ft/s 1.3 x 0.7 x 0.3” 0.2 oz. LC 013 01300.1-00 no NO - normally open Use to turn a signaling 0.7 oz. LCF 013 01301.1-00 ü 3.15 x 3.15 x 0.4” Contact closes device ON to indicate sufficient 01302.1-00 ü 3.6 x 3.6 x 0.4” 0.7 oz. when air flow LCF 013 air flow (> 8.2 ft/s) Open ü 1.1 oz. Closed LCF 013 01303.1-00 4 .7 x 4.7 x 0.4” > 8.2 ft/s Air-flow monitor integrated in protective grill Wiring example e.g. signal device (DC only) 0.3” (7.5 mm) 1.3” (34 mm) “DC” 80 x 80mm + - 92 x 92 / 120 x 120mm Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. STEGO, Inc. · 2270 Northwest Parkway · Suite 170 · Marietta, GA 30067 · Tel: (770) 984-0858 · Fax: (770) 984-0615 Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com NEW LC013-11-05/US 0.7” (17.5 mm)
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the LCF 013 01300.0-00 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Manufacturers

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods