SOTA SA12120
Specifications
Boost charge voltage
14.40 - 15.00 V/bloc at 25 °C
Capacity
12Ah (12000mAh)
Case
ABS with HB fiammability rate (according UL 94)
Chemistry
Sealed Lead Acid (AGM)
Dimensions L x W x H (TH)
151 x 98 x 94 (100)
Float charging voltage
13.50 - 13.80 V/bloc at 25 °C
Float voltage compensation
-18mV/°C
FO-02(03)
terminal type
Internal resistance
14.8 mO in full charged condition
Maximum charging current
3 A
3.6A
Operative temperature range
-20 °C to 50 °C
Terminals
F2
Total Height with Terminals
3.96 inches
Voltage
12V (12 Volts)
Weight
3.75 kg
Features
- Boost charge voltage 14.40 - 15.00 V/bloc at 25 °C
- Case ABS with HB fiammability rate (according UL 94)
- Float charging voltage 13.50 - 13.80 V/bloc at 25 °C
- Nominal Capacity 12 Ah 20 hours rate to 1.75 Vpc at 25 °C
- Nominal Voltage 12 Volt
Datasheet
Sota-SA12120-datasheet-969808844.pdf
108 KiB
Extracted Text
SA12120 SA12120 is a general purpose application battery. Within the SA range SOTA offer 12V monoblocs at various amp hour capacities enable the right battery selection for each requirement. 12 Volt 12 Ah Features Nominal Voltage 12 Volt Nominal Capacity 12 Ah 20 hours rate to 1.75 Vpc at 25 °C Float charging voltage 13.50 - 13.80 V/bloc at 25 °C Boost charge voltage 14.40 - 15.00 V/bloc at 25 °C Float voltage compensation -18mV/°C Maximum charging current 3 A Case ABS with HB fiammability rate (according UL 94) Internal resistance 14.8 mΩ in full charged conditionΩ Weight 3.75 kg L x W x H (TH): 151 x 98 x 94 (100) Dimensions Operative temperature range -20 °C to 50 °C As batteries lose part of their capacity, during storage, due to self discharge. Shelf life procedures SOTA recommends SA range of batteries can be stored for 6 months at an ambient temperature of 20 and 25 °C (see attached graph on reverse). Longer storage requires a recharge. This should be carried out in line with SOTA recommended method; 2.4 V/cell for no longer than 24 hours at 20 °C mm(inch) Faston 4.8 mm 151(5.9 4) 98(3.8 6) 3.4 78.4(3.09) 6.45 VdS No.:G103110 BATTERY MUST BE RECYCLED SA12120 12V 12Ah NON SPILLABLE BATTERY RISK OF FIRE, EXPLOSION OR BURN DO NOT DISASSEMBLE, HEAT ABOVE 50°C OR INCINERATE Faston 6.3 mm 3.4 7.95 Tolerances are +/-0.04 in. (+/-1mm) and +/-0.08 in. (+/-2mm) for height dimensions. 100(3.94) 94(3.70 ) 0.8 0.8 6.35 4.75 100 Capacity loss The battery can be used during storage without refreshing charge at various 80 temperatures Refreshing charge at 2.4 5°C Vpc for 24 hours (at 20- 25°C) must be applied as soon as possible. 60 Refreshing charge of 2.4 Vpc may be insufficient to 40°C 30°C 25°C recover the battery capacity. IS O9001 dS N.:G103110 V It is important to avoid 40 this area MH27960 02 46 8 10 12 14 16 18 20 Storage Time (months) Battery Voltage and Charge Time for Standby Use (at 25°C) Discharge curves at different current / final voltage (at 25°C) 15 140 13 Battery Voltage (V) 120 14 100 13 Recharged Capacity (%) 12 80 12 0.10 C20 11 60 11 40 10 10 0.05 C20 0.05 C 20 2.60 C 2 C 1.22 C 0.26 C 0.10 C 0.68 C Charging Current (A) 9 0 0 0 1 10 100 1.000 10.000 Discharge time (min) Discharge 100% 0 5 10 15 20 25 50% Charging time (h) Costant Current discharge table (Amperes) end voltage 5 min 10 min 15 min 20 min 30 min 45 min 1 hour 2 hour 3 hour 5 hour 10 hour 20 hour 9.60 V 36.3 25.7 19.6 15.8 11.8 8.69 6.95 3.99 2.94 1.89 1.05 0.58 9.90 V 35.3 25.0 19.2 15.5 11.6 8.56 6.90 3.94 2.92 1.88 1.04 0.58 10.02 V 34.4 24.5 18.9 15.4 11.5 8.46 6.81 3.91 2.90 1.87 1.04 0.57 10.20 V 33.1 23.9 18.7 15.2 11.3 8.36 6.71 3.85 2.86 1.85 1.03 0.57 10.50 V 31.5 22.7 17.7 14.6 10.9 8.16 6.54 3.77 2.82 1.82 1.02 0.56 10.80 V 29.2 21.3 16.5 13.7 10.4 7.78 6.29 3.66 2.66 1.73 0.98 0.55 Costant Power discharge table (Watts per bloc) end voltage 5 min 10 min 15 min 20 min 30 min 45 min 1 hour 2 hour 3 hour 5 hour 10 hour 20 hour 9.60 V 363 263 205 169 128 96.6 78.2 45.4 33.8 21.8 12.2 6.73 9.90 V 355 259 202 166 127 95.6 77.9 45.0 33.6 21.8 12.2 6.73 10.02 V 346 253 200 165 126 94.5 76.9 44.8 33.5 21.7 12.1 6.72 10.20 V 334 247 198 164 124 93.5 75.9 44.1 33.1 21.6 12.1 6.70 10.50 V 318 236 189 157 121 91.6 74.2 43.4 32.8 21.4 12.0 6.65 10.80 V 297 222 177 149 115 87.8 71.7 42.3 31.1 20.4 11.6 6.52 Recharged Capacity (%) Charging Current (A) Charging Voltage (V) Battery Voltage (V) Remaining Capacity (%) SOTA reserves the right to change or revise without notice any information or detail given in this pubblication SA12120_ver_1_10/12/2008
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the SA12120 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods