MP-ISP/ST7 In-Circuit Gang Programming System for ST7 FLASH Family Supported Devices ST72F260 ST72F651 ST72F262 ST72F652 ST72F264 ST7FDALI ST72F321 ST7FLITE0 ST72F324 ST7FLITE1 ST72F324L ST7FLITE2 ST72F521 ST7FLITEBC ST72F561 ST7FLITES ST72F621 ST7FMC1 ST72F622 ST7FMC2 ST72F623 ST72F63B ISP Cables The support for new devices is added constantly. For the latest list of supported devices, please visit our web site. Universal Base Unit (code: MP8011A) Programming Functions Load File, Edit Buffers (Code and Data ISP Programming Heads Memory), Edit Option Bytes, Read Master, (code: PHST7FZ) Blank Check, Erase, Program, Protect, Verify, Parallel Cable Auto, Statistics. ISP GANG PROGRAMMER Programming Times Composed of an Universal Base plus up Programming times depend on the to eight ISP Programming Heads microcontroller’s FLASH memory technology, memory size and oscillator frequency. For eight HDFlash devices (ST72F324, 521, 561, 621, 651, etc.) with 32 KB and an oscillator frequency of 16 MHz, total programming time is about 13 seconds (including program Code, HOST PC verify Code, program Options, verify Options). Running the Gang Programmer For eight XFlash devices (ST72F264, LITE0, User Interface LITE2, etc.) with 8 KB and an oscillator frequency of 16 MHz, total programming time is about 4 seconds (including program Code, verify Code, program Options, verify Options). TARGET BOARDS System Requirements Up to eight target boards can be in-circuit programmed • A PC running Win 9x, 2000, Me, NT or XP; simultaneously. Each target board is connected to an ISP • 64 MB of RAM plus 20 MB of HD space; Programming Head via an ISP flat cable. • One free parallel port. Ordering Information Order code: MP-ISP/ST7. The following items are included: Info panel always displays information about the device to be Overview • The programmer’s base unit (MP8011A); programmed. Additionally, the status of the programming sites is shown • Eight ISP programming heads (PHST7FZ); The MP-ISP/ST7 In-Circuit Gang Programmer, in combination with a • Eight ISP flat cables; together with the statistics about the programmed device. The editing of standard personal computer, is a full-featured, high-performance multiple • A power adapter; the Option Byte(s) is simplified through a special dialog box—the Option • A parallel cable; (gang) programming system specific for ST7 FLASH microcontrollers. Bytes dialog box is specific for each device and allows you to edit each • A test board; MP-ISP/ST7 is able to in-circuit program up to eight devices. • The user interface software; single bit of the option bytes of the device you are working with. MP- • User’s manual. MP-ISP/ST7 is composed of a single, universal and upgradable base ISP/ST7 can perform blank checking, erasing, reading, programming and unit, ready to support current and future devices (code: MP8011A) and verifying operations. A special operation, the Auto operation, groups the Customers who already own the MP8011A unit by eight “programming heads” (code: PH-ST7FZ). Each programming blank checking, erasing, programming and verifying operations in a need only purchase the ISP programming head features a header connector with all the necessary ISP signals heads (code PHST7FZ) in order to get a full ISP single operation, speeding up the programming process. All of the programming system. required to in-circuit program the target system (the same MP8011A operations share a common, simple, easy-to-use dialog box. base unit can be used in conjunction with a wide range of other optionally purchasable programming heads for traditional socket programming). Protected Mode MP-ISP/ST7 is a PC-hosted system: it communicates with the host PC Protected Mode simplifies the programming process by means of an through the LPT parallel port. Blank checking, reading, erasing, easy, guided procedure that requires no special knowledge. Protected programming and verifying operations are supported. MP-ISP/ST7 is Mode is suitable when programming large amounts of devices. Entering ready to support future devices. The upgrade operation for the support of ISP CONNECTOR and exiting the Protected Mode is password protected. new devices is as simple as downloading new releases of the PC software. 1 GND ICCDATA Software Upgrades The MP-ISP/ST7 comes with the main gang programmer unit GND ICCCLK (MP8011A), eight ISP programming heads (PH-ST7FZ), eight ISP flat SofTec Microsystems is continuously adding the support for new devices GND RESET cables to connect to the target systems to be programmed, external to the MP-ISP/ST7 Gang Programming System. The latest version of the V ICCSEL/V DD PP power supply adapter, parallel cable and user’s guide. user interface is always available free of charge at our download page. OSC_CLK NC The User Interface Each ISP programming head features a header The MP-ISP/ST7 user interface has two separate windows for editing the connector with all the necessary ISP signals required to in-circuit program the target code and data memory (if present) of the device to be programmed. An system. ISP flat cables to connect to the target systems are provided. Microcontroller Development Tools www.softecmicro.com DC00735