Real-Time Code Execution and In- Circuit Debugging without Probes—Works with All Packages Universal—Supports the Whole HCS12 FLASH Family Built-In FLASH Programmer In-System USB Programming and Connection! Debugging through a BDM-Compatible Interface Metrowerks CodeWarrior IDE with Editor, Assembler, C Compiler and Debugger CodeWarrior Development Tools inDART-HCS12 Series Included! In-Circuit Debuggers/ Programmers for Motorola HCS12 Family inDART-HCS12 Series In-Circuit Debuggers/Programmers for Motorola HCS12 Family Main Features Overview • In-circuit debugging; inDART-HCS12 is a powerful entry-level tool • Real-time code execution; for Motorola HCS12-based systems. inDART- • Built-in FLASH programmer (with SofTec HCS12 takes advantage of Metrowerks Microsystems DataBlaze programming utility); CodeWarrior HC(S)12 Integrated • In-circuit programming and debugging through Development Environment and the BDM a BDM-compatible interface; (Background Debug Module) feature to • Enhanced BDM connector featuring additional debug the user program. Together with signals (MODA, MODB, ECLK, VSS) to extend the standard debugging capabilities; CodeWarrior HC(S)12, inDART-HCS12 • Metrowerks CodeWarrior IDE with editor, provides you with everything you need to assembler, C compiler and debugger. compile, download (program), in-circuit emulate and debug user code. Full-speed Operating Features program execution allows you to perform • 1.8 to 5.5 V devices supported; hardware and software testing in real time. • Working frequency up to the microcontroller’s maximum; inDART-HCS12 is connected to the host PC • Jumperless hardware mode setting; through a USB port, while the 6-pin BDM • Automatic target frequency detection; connector of the product fits into the target’s The CodeWarrior IDE • Hardware self diagnostic test; standard BDM connector. Design Kit • Powered by the USB connector. packages also include a full-featured experiment Microcontrollers, Special Edition. The board for a specific HCS12 microcontroller.CodeWarrior IDE CodeWarrior Development Studio for Motorola • Editor;HC(S)12 Microcontrollers enables you to build • Assembler; Background Debug Module (BDM) and deploy HC(S)12 systems quickly and easily. • C Compiler (12 KB limited); All MCUs in the HCS12 family contain a single- CodeWarrior Development Studio for HC(S)12 • Linker; wire background debug interface which supports Microcontrollers, Special Edition, includes the • Source level and symbolic debugger. in-circuit programming of on-chip non-volatile CodeWarrior integrated development environment Debugging Capabilities memory and sophisticated non-intrusive debug (IDE); 12 KB code-size limited C compiler and C • Reset, Start, Stop, Single Step, Step Over, Step capabilities. This system does not interfere with source-level debugger; macro assembler and Out; normal application resources. It does not use any Assembly-level debugger. The Special Edition • Hardware breakpoints (number varies depending user memory or locations in the memory map and allows you to evaluate CodeWarrior Development on device); does not share any on-chip peripherals.The Studio for HC(S)12 Microcontrollers at no cost. • Trace (on some devices); background debug module (BDM) uses a single- • Full handling of target’s on-chip debug wire communication interface to allow non- Evaluation Boards peripheral; intrusive access to target system memory and Design Kit packages include a full-featured, • Real-time refresh of RAM, variables, registers registers. inDART-HCS12 uses the standard, 6- microcontroller-specific experiment board (device and peripherals. pin BDM connector defined by Motorola to sample provided). The demo board can be used Programming Capabilities program and debug the target device. for evaluation/experiments in the absence of a • Blank Check/Erase/Program/Read/Verify target application board. All demo boards feature FLASH memory. CodeWarrior Integrated Development a standard BDM connector, DIP-switches, push- System Requirements Environment buttons, user LEDs, a potentiometer, an RS-232 • A 133-MHz (or higher) PC running Windows inDART-HCS12 comes with a free version of connector and a prototype area. 98, 2000 or XP; CodeWarrior Development Studio for HC(S)12 • 128 MB of RAM plus 500 MB of free HD space; • A USB port; • CD-ROM drive for installation. (*) (*) Ordering Code Emulator/Programmer Evaluation Board Supported Devices Whole HCS12 FLASH Family INDART-HCS12/D Same as INDART-HCS12/D; Evaluation Board Specific for INDART-HCS12/C32 MC9S12C32 (QFP80 Package) Same as INDART-HCS12/D; Evaluation Board Specific for INDART-HCS12/DP256 MC9S12DP256 (QFP112 Package) Same as INDART-HCS12/D; Evaluation Board Specific for INDART-HCS12/E128 MC9S12E128 (QFP112 Package) (*) Note: inDART-HCS12 Series models and their respective supported devices listed in this table are up-to-date as of September 2003. For the latest news, please visit our website. An inDART-HCS12 Design Kit Package Web: http://www.softecmicro.com E-mail: info@softecmicro.com Our Local Partner DC00652