Safety Made Simple Instruments for Electrical Test & Measurement HIPOT GROUND BOND INSULATION RESISTANCE LINE LEAKAGE MULTI-FUNCTION ELECTRICAL SAFETY A g e Y n T c E y 2900 Series Hipot testers The 2900 Series is our most popular line of Hipot testers. These instruments are designed to simplify every aspect of safety testing for operators of all comfort levels. Our 2900 Series includes the most intuitive user interface in the industry and won’t take up too much space on the production line. With multiple memories and an optional RS-232 interface, you can quickly perform tests on a variety of DUT’s from the front panel or with a PC. Use this series in stand-alone applications or interconnect with a 2600 series tester to form a complete test system for NRTL compliance. Choose from 3 different models to satisfy your testing requirements. Relevant Applications: • Appliance • Lighting & LED Testing • Power Tools • Motors & Pumps 2955: 2965: 2975: AC AC DC AC DC Insulation Ground Ground Ground Resistance Hipot Continuity Hipot Continuity Hipot Continuity Hipot Hipot 2900 Series Features: T #1 T #2 50Hz60Hz Low Regulated Test Setup PLC Frequency No Load Current RAMP DWELL RS-232 Memories Remote Selection Output Sense Setup • Intuitive user interface • Includes Continuity test function • 10 programmable memories • Automate with PLC control or optional RS-232 interface • Tamper proof front panel controls • Remote Safety Interlock Call for more information: + 1-847-932-3662 or +1-800-504-0055 or visit www.hipot.com F L A i S s t e d 2900 series Model 2900 Specifications INPUT INSULATION RESISTANCE TEST MODE Voltage 115/230 V selectable, ± 15% variation Range: 100 – 1000 VDC Frequency 50/60 Hz ± 5% Output Voltage Resolution: 10 V/step Fuse 2 A / 250 V fast acting 250 VAC Accuracy ± (2% of reading + 5 volts) Range: 100 – 1000 V DIELECTRIC WITHSTAND TEST MODE Voltage Display Resolution: 10 V/step AC 0 - 5000 V, 2 V/step, 12 mA Accuracy ± (2% of reading + 5 volts) Rating: DC 0 - 6000 V, 2 V/step, 5 mA Output Range: 1–1000 MΩ (4 digit, auto ranging) (DC mode on 2965 & 2975 models) 500 VDC 1000 VDC Voltage : ± (1% of output + 5 V) MΩ MΩ MΩ Range: 0 V - max output rating, 10 V/step 0.01 1.00–40.00 1.00– Resolution: 0.01 kV Resolution: 80.00 ± (2% of setting + 5 V) relative to Voltage Setting Resistance Display 0.1 35.0–999.9 75.0– displayed output, can be adjusted Accuracy: 999.9 during operation via UP and ± (3% of reading + 2 counts) DOWN arrow keys Accuracy: at test voltage > 500 V AC Output Frequency 50/60 Hz user selectable ± (7% of reading + 2 counts) Form: Sine wave Accuracy: AC Wave Form at test voltage ≤ 500 V Distortion: <2% THD High Limit Range: 0 - 1000 MΩ (0 = off) <5% at 6 kV DC / 5 mA ( 2965 & DC Ripple Low Limit Range: 1 - 1000 MΩ 2975) Range: 0, 0.5 – 999.9 sec (0 = constant) 0 and 0.2 - 999.9 seconds Delay Timer Resolution: 0.1 sec Dwell Timer Range: 0.1 sec/step Accuracy ± (0.1% of reading + 0.05 sec) 0 for continuous running 0 and 0.2 - 999.9 seconds GENERAL SPECIFICATIONS 0.1 sec/step The following input and output signals are Ramp Timer Range: 0 ramp setting = 0.1 sec fixed ramp Remote Control provided through the 9-pin D-type connector: 2955: ramp = 0.1 sec fixed ramp & Signal Output 1. Remote control: Test, Reset & Interlock High Limit: 0.10 - 12.00 mA, 0.01 mA/step 2. Outputs: Pass, Fail, Test-in-Process 0.00, 0.10 - 12.00 mA, 0.01 mA/ Memory 10 memories AC Mode Low Limit: step (0=OFF) ( 2955, 2965, and Lockout capability to avoid unauthorized Failure Settings 2975) access to all test parameters. Memory lockout Security to avoid unauthorized access to memory Accuracy: ± (2% of setting + 0.02 mA) locations. High Limit: 0.02 - 5.00 mA, 0.01 mA/step Interlock Remote safety interlock standard. DC Mode 0.00, 0.02 - 5.00 mA, 0.01 mA/step Low Limit: Software and adjustments made through front Failure Settings (0=OFF) ( 2965 and 2975) Calibration panel. Accuracy: ± (2% of setting + 0.02 mA) Detachable 7 ft (2.13m) power cable termi- Range: 0.0 – 999.9 sec Line Cord nated in a three prong grounding plug Timer Display Resolution: 0.1 sec Interface Optional RS-232 interface Accuracy: ± (0.1% of reading + 0.05 sec) Mechanical Tilt up front feet Discharge Time ≤ 200 ms Dimension 11” x 3.5” x 11.81” (280 x 89 x 300mm) 1.00 uF <1kV 0.08 uF < 4kV Max. Capacitive Load (WxHxD) 0.75 uF <2kV 0.04 uF < 5kV in DC Mode Weight 20 lbs. (9 kg) 0.50 uF <3kV 0.01 uF < 6kV Current: DC 0.1 A ± 0.01 A, fixed Specifications subject to change without notice. High Limit: 0.00-1.50 Ω Ground Low Limit: 0.01-1.50 Ω Continuity Offset: 0.00-0.50 Ω Check Supplied Accessories Resolution: 0.01 Ω 102-069-904 Return Clip (6 ft.) - Quantity 2. Accuracy: ± (2% of setting + 0.02 Ω) 102-055-913 Input Voltage Clip (6 ft.) 125-013-001 Input Power Cable (6 ft.) 99-10040-01 Interlock 99-10097-01 Fuse Safety Made Simple © 2013 Slaughter Company, Inc. www.hipot.com +1-847-932-3662 or +1-800-504-0055 info@hipot.com n fax: +1-847-932-3665 28105 N Keith Drive n Lake Forest, IL 60045 USA