Manufacturers
SL POWER ELECTRONICS MANUFACTURE OF CONDOR/AULT BR MINT1065A1275C01
Description
SL Power Electronics MINT1065A1275C01 Power Supply. Medical Switcher | 65W | 12V | 100 ~ 240 VAC Input | Open Frame | Chassis Mount | 4.00"" L x 2.00"" W x 1.02"" H (101.6mm x 50.8mm x 26.0mm)
Part Number
MINT1065A1275C01
Price
Request Quote
Manufacturer
SL POWER ELECTRONICS MANUFACTURE OF CONDOR/AULT BR
Lead Time
Request Quote
Category
PRODUCTS - M
Features
- 2” x 4” x 1.2” Package
- 65W Convection Cooled AC-DC Power Supply
- Approved to EN/IEC/UL60601-1, 2nd Edition
- Approved to EN/IEC/UL60950-1, 2nd Edition
- Less than 0.5W No Load Power Dissipation
- Meets Efficiency Level IV Efficiency
- Rugged EMC Compliant Design
- Universal Input 90-264 VAC
Datasheet
Extracted Text
MINT1065 65W Single Output Series Medical & ITE – Universal Input Power Supply •65W Convection Cooled AC-DC Power Supply •Universal Input 90-264 VAC •Less than 0.5W No Load Power Dissipation •Rugged EMC Compliant Design •2” x 4” x 1.2” Package nd •Approved to EN/IEC/UL60601-1, 2 Edition nd •Approved to EN/IEC/UL60950-1, 2 Edition •Meets Efficiency Level IV Efficiency • Compliant (LVD, RoHS) •Optional Chassis/Cover Specifications All Specifications are typical at nominal input, full load at 25C unless otherwise stated. AC Input Turn On Time 100-240VAC +/- 10%, 47-63 Hz single phase. Less than 1 second under all rated load conditions. Input Current Hold-up Time 115VAC: 0.7A, 230VAC: 1.5A. <17 ms at 65W, nominal input (120VAC). Inrush Current Overvoltage Protection The inrush at 264VAC, at a cold start, will not exceed 40A. Built-in Input Fuses Overload Protection F1, F2: 2.5A, 250VAC fuses provided on all models. Hiccup Mode Earth Leakage Current Short Circuit Protection <300μA @ 264Vac, 60Hz, normal; <500μA SFC. Hiccup Mode Efficiency Switching Frequency Up to 90% typical. Variable 50-75kHz typical. Output Power Medical Safety Standards nd nd 65W continuous. EN/IEC/UL 60601-1, 2 Edition, EN/IEC/UL60950-1, 2 Edition Ripple and Noise Isolation 1% pk-pk max., 20MHz BW, differential mode. Measured with noise Input-Output: 4000VAC, Input-Ground: 1800VAC, Output-Ground: probe directly across output terminals. 500VAC Output Voltage Operating Temperature See chart. 0 to 70C (derate from full rated power above 40C). Voltage Adjustability Cooling Voltage pre-set by fixed resistance. Convection Minimum Load Output Power Derating Not required. See derating chart Total Regulation Storage Temperature +/- 2%. See chart. -40 to +85C. Transient Response Relative Humidity 500μs max., 50% load step, typical. 5% to 95%, non-condensing ______________________________________________________________________________________________________________________________ 1 of 3 MINT1065 65W Single Output Series Medical & ITE – Universal Input Power Supply Output Parameters Model Output Current Ripple Total OVP Number Volts (V) Open Frame w/cover & Noise Regulation Threshold MINT1065X1275C01 12V 5.25A 4.00A 120mV ±2% 15.0 ± 1.5V MINT1065X1375C01 13.2V 4.80A 3.63A 140mV ±2% 16.0 ± 1.5V MINT1065X1575C01 15V 4.33A 3.20A 150mV ±2% 18.0 ± 1.5V MINT1065X1875C01 18V 3.50A 2.66A 180mV ±2% 21.0 ± 2.0V MINT1065X2075C01 20V 3.25A 2.40A 200mV ±2% 23.0 ± 2.0V MINT1065X2475C01 24V 2.70A 2.00A 240mV ±2% 27.0 ± 2.0V MINT1065X4875C01 48V 1.35A 1.00A 480mV ±2% 55.0 ± 4.0V Specifications (continued) Vibration Shock 2 Operating: 0.003 g /Hz, 1.5 g overall, 3 axes, 10 min. / axis Operating: Half-sine, 20 g , 10 ms, 3 axes, 6 shocks total rms pk 2 Non-Operating: 0.026 g /Hz, 5.0 g overall, 3 axes, 1 hr. / axis Non-Operating: Half-sine, 40 g , 10 ms, 3 axes, 6 shocks total rms pk Dimensions Operating Altitude W 2.0” x L 4.0” x H 1.17”. See outline drawing. -500 to 10,000 ft. Weight Non-operating Altitude 150 grams -500 to 40,000 ft. EMI/EMC Compliance Conducted Emissions EN55011 Class B, FCC Part 15, Class B. Radiated Emissions EN55011 Class A, FCC Part 15, Class A. Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 3V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz.. Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m Voltage Dip Immunity EN61000-4-11 240VAC, 0%/0.5 cycle, 40%/5cycles, 70%/25 cycles Model Number Key MINT 1 065 X 12 75 C 01 01 = Standard Model, 02 and higher indicates a modified model. Input Connector - "C" = 2 pin header "75" = Output Connector - 4 pin header Output Voltage: "12" = 12V output, "24" = 24V output, etc. Model Configuration: "A" = Class I (grounded); "B" = Class II (ungrounded); "C" = Chassis/cover provided (class I only) Output Power (Watts) - "065" = 65W # of Outputs Product Family: "M" = Medical, "I" = Internal, "NT" = New Technology ______________________________________________________________________________________________________________________________ 2 of 3 MINT1065 65W Single Output Series Medical & ITE – Universal Input Power Supply Mechanical Drawings and Connector Information MINT1065 Series Connectors INPUT: J1 AMP P/N 641937-1 PIN 1) AC LINE PIN 2) AC NEUTRAL OUTPUT: J2 AMP P/N 640445-4 PIN 1) +Vout PIN 3) -Vout PIN 2) +Vout PIN 4) -Vout MATING CONNECTORS: P1 Molex 09-50-3031 P2 Molex 09-50-3041 Pins: Molex 08-50-0105 GND CONNECTION (Class I version) 0.187" FASTON TAB Output Power Derating Curve Data Sheet © 2013 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 2-1-2013 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. ______________________________________________________________________________________________________________________________ 3 of 3
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the MINT1065A1275C01 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods