SL POWER / CONDOR POWER TCM-1000-48
Datasheet
TCM-1000-24.pdf
62 KiB
Extracted Text
TCM1000, Power Factor Corrected Single Output, Hot Swap FEATURES: Diode isolated output for hot swap “Zero wire” slope program current sharing High power density 6.5 Watt/cu. in. Industry standard DIN connector 0.99 typical power factor Dc power good and ac power fail signals True remote inhibit Monotonic turn-on and turn-off Extended temperature operation High efficiency 87% typical (48 V units) Operating temperature range -20°C to +60°C SPECIFICATIONS: INPUT Ac Input: 180-264 Vac, 47-63 Hz internally fused 10 A. output voltage rating. (internal OR-ing diode.) Power Factor: 0.99 typical at full load. Meets EN61000-3.2 Class A. ENVIRONMENTAL Inrush: Limited by thermistor, 40 A maximum (8ms), cold start. Thermal Protection: Shuts down power supply if overheated. Hold Up Time: 20 ms minimum after removal of ac power at Automatic recovery. full load. Temperature Range: -20° to +50° C, full power, de-rate to 66% Efficiency: 87% typical @ full load. maximum power @ 71° C. Ac Power Fail: Provides TTL “0” 5 ms before output voltage Safety Agencies: Approved to UL1950; CSA 22.2 #950; IEC 950 goes out of regulation band upon loss of ac power. and TUV EN60950, Class 1 SELV, CE 73/23/EEC//93/68/EEC OUTPUT (low voltage directive). Adjustability: User adjustable ±5% minimum. Conducted RFI: Meets FCC Part 15, Class A; EN55022 Class B. Output Isolation: Isolated from ground 100 Vdc. Line Regulation: ±0.2% Load Regulation: ±2% (Slope Program) from 0 to 100% load Cooling: Self-cooled by internal ball-bearing fan. changes. Turn On Delay: 1 second typical. OPTIONS Ripple & Noise: 0.5% p-p, measured at 20 MHz bandwidth. Option “R” - Rack Mount Panel: special panel that is required Temperature Coefficient: 0.02% per degree C. for rack mounting. Stability: 0.1% over 8 hours, under constant line, load and ambient. AC INPUT(180-264 VAC Continuous Range) Transient Response: Output voltage returns to within 1% in less LOCATION 230 VAC CONNECTOR than 500 µs for a 50% load change. Peak transient does not exceed 3%. Z1 32 Lr ine Eurocard connecto Overload Protection: Electronic current limit, 120% maximum. D2 30 L2 ine male DIN 41 61 Overvoltage Protection: Protects load against power supply Zd 28 SH afety Groun level 1 - type induced overvoltage. Trip point is factory set so that output voltage cannot exceed 136% of nominal. Requires ac input to be DC OUTPUT cycled to reset. FUNCTION LOCATION NOTES CONNECTOR Remote Inhibit: Contact closure or TTL “0” turns off output. Dc Power Good: Provides a TTL “0” open collector when output O8 utput VoltageZy 12 D14 Z16 D1(e +) to Polarit Eurocard connector-mal is above 90% of nominal. Maximum pull-up voltage 30 Vdc; Zy 4 D6 Z8 D10(H -) to Polarit DIN 41 612 Level 1-type maximum sink current, 10 mA. Redundancy: Built-in OR-ing diode, slope program current STATUS AND CONTROL sharing, and DIN blade connector provide “hot swap” and “N+1” FUNCTION LOCATION NOTES CONNECTOR capabilities. Current sharing remains within 10% of the unit’s full D0 c Power GoodZo 2Rr eference t Eurocard connecto output rating given 0.2% initial accuracy in the output voltage setting. A2 c Power FailDn 2 c2 ommo male DIN 41 61 Current Sharing: As calibrated at factory, modules will share I4 nhibitZH 2 level 1-type current within 10% of full rated load. Reverse Voltage: Protected against reverse voltage up to twice Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565 FAX 805-487-8911 www.condorpower.com 94 TCM1000, Power Factor Corrected Single Output, Hot Swap Commercial Model Power Out Output No. Output Current Total Regulation T0 CM-1000-24 11 00 2A 4V 4% 1.6 ±2 T0 CM-1000-28 11 00 2A 8V 3% 5.7 ±2 T0 CM-1000-48 11 00 4A 8V 2% 0.8 ±2 TCM1000 MECHANICAL SPECIFICATIONS: Dimensions: Inches Millimeters Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 805-486-4565 FAX 805-487-8911 www.condorpower.com 95
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the TCM-1000-48 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods