SL POWER / CONDOR POWER MAX-754
Datasheet
Extracted Text
NON-STOCK ITEM; SPECIAL ORDER ONLY MAX-750 Multiple Output NOT FOR NEW DESIGNS FEATURES: 3 Over 4 watts/in power density 80% overall efficiency VMEbus and Multibus II system compatibility Meets international safety agency requirements All outputs fully regulated ±1% High peak current for motor starting Ac automatic line selection option SPECIFICATIONS: Conducted RFI: Meets FCC Part 15, Subpart J, Class A; EN55022 Class B; CISPR 22 Class B. INPUT Cooling: 30 cfm required to achieve full ratings. Ac Input: 90-132 Vac/180-264 Vac, 47 to 63 Hz. User selectable. Output Isolation: Isolated from ground 50 Vdc. See option “A” for automatic line selection. Internally fused for 15 A. Inrush: Cold start ac current is less than 90 A at 115 Vac and OPTIONS: 30 A at 230 Vac. Limited by thermistor. Option “A”, Ac Auto-Range: Automatically selects proper ac Holdup Time: 16 ms minimum after removal of power, at line voltage range to enable power operation at either 115 or 230 nominal line, full load. Vac without user intervention. Efficiency: 80% typical. Option “P”, Ac Power Fail: Provides TTL “0” 5 ms before Brownout Protection: Holds regulation to 85 Vac or 170 Vac. output voltage goes out of regulation band upon loss of ac power. OUTPUT VMEbus compatible, provides 48 mA sink current capability. Not Adjustability: User adjustable ±5% minimum. available if option “G” is selected. Line & Load Reg: ±1% over ac input range and 0 to 100% load change. Output #1 requires minimum load of 10%. AC INPUT Ripple & Noise: Less than 1% p-p or 100 mV, whichever is FUNCTION 115 VAC* 230 VAC CONNECTOR greater. It nput SelectSn horOn pe 0.250 Male Fasto Remote Sense (Output #1): Compensates for 250 mV total line Te B1-(L)L1 in Lp ine Barrier stri drop. Open sense lead protection. Tl B1-(N)N2 eutraLs ine #6-32 screws 3/8 center Temperature Coefficient: 0.02% per degree C. Stability: 0.1% over 8 hours after 30 minutes warm-up. Td B1-(GND)Sd afety Groun Safety Groun Transient Response (Output #1): Output voltage returns to DC OUTPUT within 1% in less than 500 µs for a 50% load change. Peak FUNCTION LOCATION NOTES CONNECTOR transient does not exceed 5%. OV utput #1Tt erminal marked +Ms ain outpu Bus bar Overload Protection: All outputs are protected against overload Terminal marked and short circuit. Automatic recovery upon removal of fault. Rs tn (common) #1/4-20 screw COM Overvoltage Protection (Output #1): Protects load against O3 utput #2Tp B2- Barrier stri power supply induced overvoltage. Trip point is factory set so that T) B2-4 Rs tn (common #6-32 screw output voltage cannot exceed 136% of nominal. O5 utput #3Ts B2- 3/8" center Remote Inhibit: Contact closure to the negative sense line T) B2-4 Rtn (common drops output power to nominal zero. Reverse Voltage: Protected against reverse voltage up to supply O1 utput #4T) B2- (+ current rating. (2 If provided)T) B2- (- ENVIRONMENTAL *Rtn connected to common only if output is polarized in product Thermal Protection: Shuts down power supply if overheated. STATUS AND CONTROL Automatic recovery. FUNCTION LOCATION NOTES CONNECTOR Temperature Range: 0° to 50°C at full ratings. Derate to half power at 70°C. R) emote SenseJe 1-1 (+SOe utput #1 Sens AMP MTA typ Safety Agencies: Most models are approved to UL1950; CSA Jn 1-2 (-S)On utput #1 Sense Rt #640456-4 pi 22.2 #234; IEC 950 and TÜV EN60950, Class 1 SELV., CE 72/23/ A) c Power Fail orJ2 1-3 (PFR) eference to J1- header (locking EEC/93/68EEC (low voltage directive). Dc Power Good* I) nhibitJ2 1-4(1H Short to J1- *Optional function Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565 FAX 805-487-8911 www.condorpower.com 88 MAX-750 Multiple Output Commercial Model Power Out Output No. Output Current Total Regulation M0 AX-754-1205P 71 5 +A 5V 1% 20 1 M2 AX-754-1205AP +k 12V 1% 2/20 A p 1 3V-A 12 1% 0 1 4V5A .2 2% 1 MAX-750 MECHANICAL SPECIFICATIONS: Dimensions: Inches Millimeters Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 805-486-4565 FAX 805-487-8911 www.condorpower.com 89
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the MAX-754 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods