® CompactPCI SYSTEM POWER SUPPLIES CPCI SERIES 150 to 350 Watts, Ac Input with PFC DCPI SERIES 150 to 350 Watts, 48 Vdc Input EXECUTIVE MEMBER FEATURES:  150 W and 200 W in 3U x 8HP, 350 W in 6U x 8HP ®  Fully compliant with PICMG CompactPCI speciŢ cations • Current sharing and internal OR-ing diodes for N+1 redundancy • High current 5 V and 3.3 V outputs ® • CompactPCI package requires only 15 cfm of external cooling air • Universal ac input versions with power factor correction • 48 Vdc input versions The CPCI series (ac input) and DPCI series (dc input) are highly reliable power supplies for CompactPCI systems, which are increasingly used in communications, industrial, military/aerospace, and other applications. These power supplies offer high power density in plug-in modules ® that meet the requirements of the PICMG power interface speciŢ cation for CompactPCI systems. These units may be used as a single power supply for a CompactPCI system, or multiple units may be used in parallel for higher power capabil- ity as needed. In addition, all units include current sharing, internal OR-ing diodes, and a hot plug input/output connector to offer full hot swap capability and N+1 redundancy. Also, compatible ac and dc input units offer standardization on a single power supply series for a system mechanical conŢ guration. 3U x 8 HP 6U x 8 HP Connector Input Power Model No. Connector Input Power Model No. 47 Pin Modular 150 W CPCI-154-1203 47 Pin Modular Ac 350 W CPCI-354T-1203 Ac 200 W CPCI-204-1203 Dc 350 W DPCI-354T-1203 150 W DPCI-154-1203 38 Pin Modular Ac 350 W CPCI-354-1203 Dc 200 W DPCI-204-1203 Dc 350 W DPCI-354-1203 DIN “M” 150 W CPCI-154-1203M Ac 200 W CPCI-204-1203M 150 W DPCI-154-1203M Dc 200 W DPCI-204-1203M Condor D.C. Power Supplies, Inc.  2311 Statham Parkway, Oxnard, CA 93033 800-235-5929  805-486-4565  FAX 805-487-8911  www.condorpower.com ® CompactPCI SYSTEM POWER SUPPLIES CPCI SERIES 150 to 350 WATTS, AC INPUT WITH PFC, QUAD OUTPUT, HOT SWAP SPECIFICATIONS EMI: CONDUCTED RFI AC INPUT: 90-264 Vac continuous range, 47 to 63 Hz. Meets FCC Part 15, Subpart J, class B; POWER FACTOR: 0.99 typical at full load. Meets EN61000-3-2. EN55022 class A; CISPR 22 class B. INRUSH: All 150 W and 200 W models class A CPCI-154, 204 MODELS: Cold start ac current is less than 15 A at FAIL# SIGNAL: TTL compatible signal. Signal goes low 115 Vac, and 30 A at 230 Vac. Limited by thermistor. under the following conditions: CPCI-354 MODELS: Cold start ac current is less than 30 A at CPCI-154 & CPCI-204 Models (all connector types): 115 Vac, and 60 A at 230 Vac. Limited by thermistor. Outputs #1 or #2 fail; an overcurrent condition on outputs #1, #2, or #3; an overtemperature shutdown; an overvoltage BROWNOUT PROTECTION: Holds regulation to 85 Vac shutdown; or an ac input failure (5ms warning before outputs (30 seconds maximum) shutdown). HOLDUP TIME: 16 ms minimum after removal of power at full load. CPCI-354 & CPCI-354T Models: 10 ms minimum for CPCI 200s. Any of 4 outputs fail; an overtemperature shutdown; an EFFICIENCY: 70% typical. overvoltage shutdown; or an ac input failure (5ms warning before outputs shut down). AC INPUT Min. Load Maximum Output Model Power Output 1 Output 2 Output 3 Output 4 on V1* From V1 & V2 CPCI-154-1203 150 W 5.0 V @ 25A 3.3 V @ 20 A 12 V @ 5.5 A -12 V @ 0.5 A 2.5 A 25 A CPCI-154-1203M 150 W 5.0 V @ 25 A 3.3 V @ 20 A 12 V @ 5.5 A -12 V @ 0.5 A 2.5 A 25 A CPCI-204-1203 200 W 5.0 V @ 25 A 3.3V @ 30 A 12 V @ 5.5 A -12 V @ 0.5 A 3.0 A 35 A CPCI-204-1203M 200 W 5.0 V @ 25 A 3.3 V @ 25 A 12 V @ 5.5 A -12 V @ 0.5 A 2.5 A 35 A CPCI-354-1203 350 W 5.0 V @ 50 A 3.3 V @ 40 A 12 V @ 12 A -12 V @ 4 A 5.0 A 65 A CPCI-354T-1203 350 W 5.0 V @ 50 A 3.3 V @ 40 A 12 V @ 12 A -12 V @ 4 A 5.0 A 65 A * For full output current capability on V2, V3, V4. DPCI SERIES 150 to 350 WATTS, QUAD OUTPUT, 48 VDC INPUT, HOT SWAP SPECIFICATIONS DC INPUT: 36-72 Vdc EFFICIENCY: 75% typical FAIL# SIGNAL: TTL compatible signal. Signal goes low under the following conditions: Any of 4 outputs fail; an overtemperature shutdown; or an overvoltage shutdown. 48 VDC INPUT Min. Load Maximum Output Model Power Output 1 Output 2 Output 3 Output 4 on V1* From V1 & V2 DPCI-154-1203 150 W 5 V @ 25 A 3.3 V @ 20 A 12 V @ 5.5 A -12 V @ 0.5 A 2.5 A 25 A DPCI-154-1203M 150 W 5 V @ 25 A 3.3 V @ 20 A 12 V @ 5.5 A -12 V @ 0.5 A 2.5 A 25 A DPCI-204-1203 200 W 5 V @ 25 A 3.3 V @ 30 A 12 V @ 5.5 A -12 V @ 0.5 A 3.0 A 35 A DPCI-204-1203M 200 W 5 V @ 25 A 3.3 V @ 25 A 12 V @ 5.5 A -12 V @ 0.5 A 2.5 A 35 A DPCI-354-1203 350 W 5 V @ 50 A 3.3 V @ 40 A 12 V @ 12 A -12 V @ 4 A 5.0 A 65 A DPCI-354T-1203 350 W 5 V @ 50 A 3.3 V @ 40 A 12 V @ 12 A -12 V @ 4 A 5.0 A 65 A * For full output current capability on V2, V3, V4. Condor D.C. Power Supplies, Inc.  2311 Statham Parkway, Oxnard, CA 93033 800-235-5929  805-486-4565  FAX 805-487-8911  www.condorpower.com ® CompactPCI SYSTEM POWER SUPPLIES GENERAL SPECIFICATIONS OUTPUT ENVIRONMENTAL LINE & LOAD REGULATION: COOLING ± 2% over input range and 0 to 100% load change. 15 cfm, 400 lfm airţ ow required for cooling. RIPPLE & NOISE OUTPUT ISOLATION 1% p-p or 50 mV, whichever is greater. Isolated from ground 50 Vdc (leakage current <20 µA) Measured at mating connector with 20 µF THERMAL PROTECTION REMOTE SENSE Shuts down power supply if overheated. Open sense lead protection Automatic recovery. TEMPERATURE COEFFICIENT TEMPERATURE RANGE (Outputs #1 and 2): 0.03% per degree centigrade 0 to 40º centigrade at full ratings; derate 2.5% per degree centigrade from 40º to 70º centigrade. STABILITY Unit will start up at -20º centigrade. 0.1% over 8 hours after 30 minutes warm-up. TRANSIENT RESPONSE MISCELLANEOUS (Outputs #1 and 2): Output voltage returns to within 1% in less than 1 ms for a 50% load change. Peak transient SAFETY AGENCY APPROVALS does not exceed 5%. Models are approved to UL1950; CSA 22.2 #234; IEC 950 and TUV EN60950, Class 1 SELV., OVERVOLTAGE PROTECTION CE 72/23/EEC/93/68EEC (low voltage directive). (Outputs #1 and #2): Protects load against power supply induced overvoltage. Trip-point is factory set so that GUARANTEED FOR 2 YEARS output voltage cannot exceed 136% of nominal. Input Two year guarantee includes labor and parts. power must be recycled to reset. Guarantee applies to operation at full published speciŢ cations at the end of 2 years. OVERLOAD PROTECTION All outputs are protected against overload and short circuit, Automatic recovery upon removal of fault. OPTIONS DEG# SIGNAL : TTL compatible signal. Signal goes low 20ºC before an LOW LEAKAGE overtemperature shutdown. (CPCI Models only) “L” option: Leakage current less than 0.5 mA per unit. Will FAIL LED : require additional Ţ ltering for compliance to EMI speciŢ ca- Amber LED illuminates upon a failure condition as per tions. the CPCI and DPCI series speciŢ cations. STATUS LED : MECHANICAL DIMENSIONS Green LED illuminates with no presence of any failure condition. CPCI-154, CPCI-204, DPCI-154 & DPCI-204 Models: REMOTE ENABLE 3U H x 8HP W, 160 mm board depth (see outline drawing). Contact closure to common turns on dc outputs. Utilizes a 47 pin modular connector in accordance with Recessed pin for “make last, break Ţ rst” connection. ® PICMG Power Interface SpeciŢ cation 2.11. REMOTE INHIBIT CPCI-154M, CPCI-204M, DPCI-154M & Contact closure to the negative sense line or a TTL DPCI-204M Models: level “0” turns off dc outputs. 3U H x 8HP W, 160 mm board depth (see outline drawing). ® Utilizes a DIN “M” connector as referenced in the PICMG Power Interface SpeciŢ cation 2.11. REDUNDANCY Built-in ORing diodes, slope program current sharing on CPCI-354, DPCI-354 Models: all outputs, and self aligning connector provide hot swap 6U H x 8HP W, 160 mm board depth (see outline drawing). and N+1 capabilities. Current sharing remains within Utilizes a 38 pin modular connector as referenced in the 10% of the unit’s full output rating while units are in ® PICMG Power Interface SpeciŢ cation 2.11. thermal equilibrium. CPCI-354T, DPCI-354T Models: REVERSE VOLTAGE 6U H x 8HP W, 160 mm board depth (see outline drawing). Protected against reverse voltage up to supply Utilizes a 47 pin modular connector in accordance with current rating. except for reverse voltage on output #4 ® PICMG Power Interface SpeciŢ cation 2.11. on CPCI-200. Condor D.C. Power Supplies, Inc.  2311 Statham Parkway, Oxnard, CA 93033 800-235-5929  805-486-4565  FAX 805-487-8911  www.condorpower.com ® CompactPCI SYSTEM POWER SUPPLIES POWER SUPPLY PIN ASSIGNMENTS Model: CPCI-354-1203 Model: DPCI-354-1203 Connector: Positronics PCI38M400A1 Connector: Positronics PCI38M400A1 Mating Connector: PCI38F300A1 Mating Connector: PCI38F300A1 Pin No. Designation Pin No. Designation Pin No. Designation Pin No. Designation 1 +5 V 20 Not Used 1 +5 V 20 Not Used 2 +5 V 21 -12 V 2 +5 V 21 -12 V 3 +5 V 22* GND 3 +5 V 22* GND 4 +5 V 23 GND 4 +5 V 23 GND 5 GND 24 +5 V Sense 5 GND 24 +5 V Sense 6 GND 25* Enable 6 GND 25* Enable 7 GND 26 Sense Return 7 GND 26 Sense Return 8 GND 27 +3.3 V Sense 8 GND 27 +3.3 V Sense 9 GND 28* Not Used 9 GND 28* Not Used 10 GND 29 DEG# 10 GND 29 DEG# 11 GND 30 +12 V Sense 11 GND 30 +12 V Sense 12 GND 31 Inhibit 12 GND 31 Inhibit 13 +3.3 V 32 Not Used 13 +3.3 V 32 Not Used 14 +3.3 V 33 Not Used 14 +3.3 V 33 Not Used 15 +3.3 V 34 Not Used 15 +3.3 V 34 Not Used 16 +3.3 V 35 Fail # 16 +3.3 V 35 Fail # 17 GND 36** Safety Ground 17 GND 36** Safety Ground 18 +12 V 37 Ac Neutral 18 +12 V 37 -48 Vdc Input Return 19 Not Used 38 Ac Line 19 Not Used 38 -48 Vdc Input * Pins 22,25, and 28 are last mate, Ţ rst break pins. * Pins 22, 25, and 28 are last mate, Ţ rst break pins. ** Pin 36 is a Ţ rst mate, last break pin. ** Pins 36 is a Ţ rst mate, last break pin. Model: CPCI-354T-1203 Model: DPCI-354T-1203 CPCI-154-1203 DPCI-154-1203 CPCI-204-1203 DPCI-204-1203 Connector: Positronics PCI47M400A1 Connector: Positronics PCI47M400A1 Mating Connector: PCI47F300A1 Mating Connector: PCI47F300A1 Pin No. Designation Pin No. Designation Pin No. Designation Pin No. Designation 1 +5 V 25 Not Used 1 +5 V 25 Not Used 2 +5 V 26 Not Used 2 +5 V 26 Not Used 3 +5 V 27* Enable 3 +5 V 27* Enable 4 +5 V 28 Not Used 4 +5 V 28 Not Used 5 GND 29 Not Used 5 GND 29 Not Used 6 GND 30 +5 V Sense 6 GND 30 +5 V Sense 7 GND 31 Not Used 7 GND 31 Not Used 8 GND 32 Not Used 8 GND 32 Not Used 9 GND 33 +3.3 V Sense 9 GND 33 +3.3 V Sense 10 GND 34 Sense Return 10 GND 34 Sense Return 11 GND 35 Not Used 11 GND 35 Not Used 12 GND 36 +12 V Sense 12 GND 36 +12 V Sense 13 +3.3 V 37 Not Used 13 +3.3 V 37 Not Used 14 +3.3 V 38 DEG# 14 +3.3 V 38 DEG# 15 +3.3 V 39 Inhibit 15 +3.3 V 39 Inhibit 16 +3.3 V 40 Not Used 16 +3.3 V 40 Not Used 17 +3.3 V 41 Not Used 17 +3.3 V 41 Not Used 18 +3.3 V 42 Fail # 18 +3.3 V 42 Fail # 19 GND 43 Not Used 19 GND 43 Not Used 20 +12 V 44 Not Used 20 +12 V Output 44 Not Used 21 -12 V 45** Safety Ground 21 -12 V Output 45** Safety Ground 22 GND 46 Ac Neutral 22 GND 46 -48 Vdc Input Return 23 Not Used 47 Ac Line 23 Not Used 47 -48 Vdc Input 24 GND 24 GND * Pin 27 is a last mate, Ţ rst break pin. * Pin 27 is a last mate, Ţ rst break pin. ** Pin 45 is a Ţ rst mate, last break pin. ** Pin 45 is a Ţ rst mate, last break pin. Model: CPCI-154-1203M Model: DPCI-154-1203M CPCI-204-1203M DPCI-204-1203M Male Connector: DIN 41612 Type “M” Male Connector: DIN 41612 Type “M” Mating Connector: ERNI #914374 or AMP#148370 Mating Connector: ERNI #914374 or AMP#148370 Pin No. Designation Pin No. Designation Pin No. Designation Pin No. Designation A13 Not Used B17 +3.3 V A13 Not Used B17 +3.3 V A14 Inhibit B18 +3.3 V A14 Inhibit B18 +3.3 V A15 Not Used B19 +12 V Output A15 Not Used B19 +12 V Output A16 Sense Return B20 -12 V Output A16 Sense Return B20 -12 V Output A17 +5 V Sense B22 +5 V A17 +5 V Sense B22 +5 V A18 +3.3 V Sense B25 GND A18 +3.3 V Sense B25 GND A19 +12 V Output B28 Not Used A19 +12 V Output B28 -48 Vdc Input Return A20 -12 V Output B31 Not Used A20 -12 V Output B31 -48 Vdc Input B2 Ac Line C13 Enable B2 Not Used C13 Enable B5 Not Used C14 DEG# B5 Ac Neutral C14 DEG# B8 Not Used C15 Fail # B8 Not Used C15 Fail # B11 Chassis Ground C16 +3.3 V B11 Chassis Ground C16 +3.3 V B13 +3.3 V C17 +3.3 V B13 +3.3 V C17 +3.3 V B14 +3.3 V C18 +3.3 V B14 +3.3 V C18 +3.3 V B15 +3.3 V C19 +12 V Output B15 +3.3 V C19 +12 V Ouput B16 +3.3 V C20 -12 V Output B16 +3.3 V C20 -12 V Ouput Condor D.C. Power Supplies, Inc.  2311 Statham Parkway, Oxnard, CA 93033 800-235-5929  805-486-4565  FAX 805-487-8911  www.condorpower.com ® CompactPCI SYSTEM POWER SUPPLIES MECHANICAL SPECIFICATIONS: 150-200 Watts 150-200 Watts Condor D.C. Power Supplies, Inc.  2311 Statham Parkway, Oxnard, CA 93033 800-235-5929  805-486-4565  FAX 805-487-8911  www.condorpower.com ® CompactPCI SYSTEM POWER SUPPLIES MECHANICAL SPECIFICATIONS: 350 Watts 350 Watts 20K4/00 Condor D.C. Power Supplies, Inc.  2311 Statham Parkway, Oxnard, CA 93033 800-235-5929  805-486-4565  FAX 805-487-8911  www.condorpower.com