Manufacturers
SKYNET SNP-Z109
Specifications
Conducted Immunity
EN61000-4-6,3V with 80% AM,criterion A
Efficiency
80%~90% depends on models
EFT/Burst
EN61000-4-4,2kV,criterion A
Emission
FCC/CISPR,level B
ESD
EN61000-4-2,criterion A
Harmonic Currents
EN61000-3-2,Class D
Hold Up Time
20mS typical at rated load and 115 VAC
Input Frequency
47 Hz to 63Hz
Input Voltage
90 VAC to 264 VAC
Inrush Current
less than 30A at 115 VAC, less than 60A at 230 VAC,cold start, 25°C
Operating Altitude
0 to 2000m
Operating Temperature
Refer to Power DeratingCurve Cooling Convection for rated load 18CFM for max load
Over Load/Short
Auto-recovery
Over Voltage*
Latch-off
Radiated Immunity
EN61000-4-3
Relative Humidity
5% to 95% RH, non-condensin
Storage Temperature
-40oC to +85oC
Surge
EN61000-4-5,1kV L-L,2kV L-E,criterion A
Voltage Dips
EN61000-4-11
Voltage Flicker
EN61000-3-3 (Medical models)
Features
- 3" x 5" footprint
- Built-in Active PFC
- Compact Size with only 1.18" Height
- TE & Medical models available
Datasheet
Extracted Text
SNP-Z109 SPECIFICATION SPECIFICATION for SWITCHING POWER SUPPLY M/N : SNP-Z109 Reviewed by Project Manager Typed by Document Assistant LAST REV. NO. SKYNET ELECTRONIC Proprietary Information Page 1-1 Skynet Electronic Co., Ltd. FM-D0222-102297 Z109-040802 SNP-Z109 SPECIFICATION 1.0 INTRODUCTIONS The SNP-Z109 is a single output, 108 Watts version switching power supply. 2.0 INPUT SPECIFICATIONS 2.1 Input Voltage The range of input voltage is from 90VAC to 264VAC and the nominal line voltage is 115V 60Hz/230V 50Hz. 2.2 Input frequency The range of input frequency is from 47Hz to 63Hz. 2.3 Input current The maximum input current is 2A at 115VAC or 1A at 230VAC. 2.4 Inrush current The inrush current will not exceed 30A at 115VAC input or 60A at 230VAC input, cold o start, 25 C. 3.0 OUTPUT SPECIFICATIONS 3.1 Load range output min. load rated load max. load voltage accuracy +24V 0A 4.5A 5.4A 23.8V to 24.2V At factory, in 60% rated load conditions and nominal input, the +24V is checked to be within the specified voltage accuracy range. The max. load with convection cool can last for around 10 sec. at nominal line, continuously draw peak current will reduce life time and MTBF, and will probably shut down the power supply. 3.2 Ripple and noise The peak to peak ripple and noise for each output is less than 1% of output voltage at rated load and nominal input. Measuring is done by 15MHz band width limited oscilloscope and terminated each output with a 0.47uF capacitor. 3.3 Line regulation The line regulation for each output is less than + -0.5% while measuring at rated load and + -10% of nominal input voltage changing. 3.4 Load regulation The load regulation for +24V is less than + -1% measuring is done by changing the measured output load + -40% from 60% rated load and nominal line. 3.5 Remote sense The compensation of voltage drop for +24V output is 0.5V max. The +24V output has remote sense capability. 3.6 Capacitance loading capability The capacitance loading capability can be up to 2700uF. Proprietary Information Page 2-2 Skynet Electronic Co., Ltd. Z109-040802 SNP-Z109 SPECIFICATION 4.0 GENERAL FEATURES 4.1 Efficiency The efficiency is higher than 85% typ. while measuring at nominal line and rated load. 4.2 Hold up time The hold up time is longer than 16mS at 115VAC input and rated load, which is measured from the end of the last charging pulse to when the main output drops down to 95% output voltage. 4.3 Protection For some reason the power supply fails to control itself, the build-in over voltage protection circuit will shut down the outputs to prevent damaging external circuits. The trip point is around 26.2V to 31V. The power supply will go into auto-recovery mode against short circuit or over load conditions and will auto-recover while faulty condition is removed. 5.0 ENVIRONMENT SPECIFICATIONS 5.1 Operating temperature o o C to 50 C 0 108W with convection cooling. 130W with 18 CFM air flow. 5.2 Storage temperature o o -40 C to 85 C 5.3 Operating humidity 5 ~95% RH, non-condensing . 5.4 Altitude Will operate properly at any altitude between 0 to 10000 ft. 6.0 INTERNATIONAL STANDARDS 6.1 Safety standards Designed to meet the following standards : UL 60950 CSA 22.2 NO.234 VDE EN 60 950 6.2 EMI standards Designed to meet the following limits : EN55022 “B” FCC docket 20780 curve “B” EN61000-3-2 Proprietary Information Page 3-3 Skynet Electronic Co., Ltd. Z109-080901 SNP-Z109 SPECIFICATION 6.3 EMS standards EN61000-4-2 6KV contact discharge, 8KV air discharge criteria A EN61000-4-3 10V/m criteria A EN61000-4-4 2KV criteria A EN61000-4-5 2KV criteria A EN61000-4-6 3V criteria A EN61000-4-11 30% dips 10ms criteria B 60% dips 100ms criteria C 95% dips 5000ms criteria C Proprietary Information Page 4-4 Skynet Electronic Co., Ltd. Z109-080901 SNP-Z109 SPECIFICATION 7.0 MECHANICAL SPECIFICATION 7.1 Dimensions Dimensions shown in mm as above. Tolerance specified is + -0.4mm. 7.2 Connectors TB1--AC input : Molex 5277-02A or equivalent TB2--DC output : Molex 5273-06A or equivalent TB3--Remote Sense : Molex 5045-02A or equivalent 7.3 DC output pin assignment Pin 1. +24V 2. +24V 3. +24V 4. GND 5. GND 6. GND Proprietary Information Page 5-5 Skynet Electronic Co., Ltd. Z109-090502 SNP-Z109 SPECIFICATION 8.0 PERFORMANCE (input voltage is 115VAC, unless others specified) 8.1 Switching frequency ripple 8.2 Line frequency ripple +24V/4.5A +24V/4.5A 100mV/div , 2us/div 100mV/div , 5ms/div 8.3 Output turn on wave form 8.4 Output turn off wave form +24V/4.5A +24V/4.5A 10.0V/div , 5ms/div 10.0V/div , 10ms/div 8.5 Hold-up time 8.6 Over voltage protection Trip point around 28.6V 10V/div Primary DC 200V/div 10ms/div 10V/div , 10ms/div Proprietary Information Page 6-6 Skynet Electronic Co., Ltd. Z109-090502 SNP-Z109 SPECIFICATION 8.7 +24V step response +24V 0.50V/div , 2ms/div +24V step from 0.9A to 4.5A Proprietary Information Page 7-7 Skynet Electronic Co., Ltd. Z109-080901 SNP-Z109 SPECIFICATION 8.8 FCC B performance 8.9 EN55022 B Proprietary Information Page 8-8 Skynet Electronic Co., Ltd.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the SNP-Z109 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Skynet SNP-7043-1 Power Supply. 40W
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods