General Purpose PFC + 100W (Universal) SNP-Z10 Series Description: Open frame size of 3" X 5" has become an industrial standard for more than 10 years. The power density is around 2.0 watts/ cu.in. at very beginning and then stays at 3.0 watts/cu.in. for a long time. Now, the SNP-Z10 series can offer 6.0 watts/cu.in. plus active PFC in 3" X 5" X 1.2" size. Undoubtedly the SNP- Z10 series is the state-of-the-art at the moment. The patent was granted for this cirucit. Model available: SNP-Z106 for 5V/20A SNP-Z107 for 12V/9A SNP-Z108 for 15V/7A SNP-Z109 for 24V/4.5A SNP-Z10T for 48V/2.3A SNP-Z101 for 5V/11.5A, 12V/3A, -12V/0.5A SNP-Z103 for 5V/7A, 12V/8A SNP-Z10D for 3.3V/10A, 5V/8A, 12V/0.5A SNP-Z10B for 3.3V/25A General Specifications: Max. capacitive load ........................... SNP-Z106 / 30000uF, Input voltage ........................................ 90 VAC to 264 VAC SNP-Z107 / 10000uF, SNP-Z109 / 2700uF Input frequency .............................................. 47 Hz to 63 Hz Remote Sense ............ Compensates for 0.5V load drop Inrush current ................................less than 30A at 115VAC o o min.Operating temperature ................. 0 C to 50 C convection less than 60A at 230VAC o Cooling ....................................... Free air convection for 100W cold start, 25 C with 18CFM forced air flow for 130W Efficiency ................................ 80%~90% depends on models o o Storage temperature ...................................... -20 C to +85 C Hold up time ....................................................... 20mS typical EMI ................................................. EN55022 "B", FCC "B" at rated load and 115VAC Harmonics ........................................................ EN61000-3-2 Over load protection .......................................... auto recovery EMS .......................................... EN61000-4-2,-3,-4,-5,-6,-11 Short circuit protection....................................... auto recovery Safety ..........................................................................UL 60950 Over voltage protection .............................................. latch off CSA 22.2 No. 234, EN60950 Mechanical Specifications: SNP-Z106 Notes: 1. Dimensions shown in mm as above. Tolerance: +/-0.4mm. 2. Size: 2.1 SNP-Z106, Z107, Z108, Z109, Z10T, Z10B 127.0mm X 76.2mm X 32.4mm 5" X 3" X 1.28" 2.2 SNP-Z101, Z103, Z10D 127.0mm X 76.2mm X 34.4mm 5" X 3" X 1.35" 3. Connectors: AC input : Molex 5277-02A or equivalent DC output : Molex 5273 or equivalent Remote Sense : Molex 5045-02A or equivalent -James- ** This catalogue is only for models selection. For business, engineering specification by model is necessary. AUG. 2003 4-1 ✚✦ General Purpose PFC + 100W (Universal) SNP-Z10 Series Output Specifications: MODEL OUTPUT LOAD VOLTAGE RIPPLE LINE LOAD NO. RAIL MIN. RATED MAX ACCURACY NOISE REG. REG. SNP-Z106 +5V 0A 20A 26A +4.95V~+5.05V 50mVpp ±0.5% ±1% SNP-Z107 +12V 0A 9A 10.8A +11.90V~+12.10V 120mVpp ±0.5% ±1% SNP-Z108 +15V 0A 7A 8.7A +14.90V~+15.10V 120mVpp ±0.5% ±1% SNP-Z109 +24V 0A 4.5A 5.4A +23.80V~+24.20V 200mVpp ±0.5% ±1% SNP-Z10T +48V 0A 2.3A 2.7A +47.60V~+48.40V 200mVpp ±0.5% ±1% SNP-Z101 +5V 0A 11.5A 15A +4.95V~+5.05V 50mVpp ±0.5% ±1% +12V 0A 3A 5A +11.40V~+12.60V 100mVpp ±0.5% ±5% -12V 0A 0.5A 0.5A -11.40V~-12.60V 100mVpp ±0.5% ±5% SNP-Z103 +5V 0A 7A 10A +4.95V~+5.05V 50mVpp ±0.5% ±1% +12V 0A 8A 10A +11.40V~+13.20V 120mVpp ±0.5% ±5% SNP-Z10D +3.3V 0A 10A 15A +3.20V~+3.40V 50mVpp ±0.5% ±1% +5V 0A 8A 10A +4.75V~+5.25V 50mVpp ±0.5% ±5% +12V 0A 0.5A 0.5A +11.40V~+12.60V 100mVpp ±0.5% ±5% SNP-Z10B +3.3V 0A 25A 30A +3.20 ~+3.40V 50mVpp ±0.5% ±1% Note: 1. The total output current is rated load with free air convection and max. load with 18CFM of forced air flow over the unit. 2. At factory, in 60% rated load condition, each output is checked to be within voltage accuracy. 3. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 4. Load regulation is defined by changing ±40% of measured output load from 60% rated load at another output set to 60% rated load. 5. Ripple & noise is measured by using 15MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor and a 47u electrolytic capacitor at rated load and nominal line. 6. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. 7. Efficiency is measured at rated load and nominal line. -James- ** This catalogue is only for models selection. For business, engineering specification by model is necessary. 4-2 AUG. 2003 ✛✘ General Purpose PFC + 100W (Universal) SNP-Z10 Series Performance for SNP-Z106: 1. Switching frequency ripple 2. Line frequency ripple +5V/20A +5V/20A 50mV/div, 5ms/div 50mV/div, 2us/div 3. Output turn on wave form 4. Output turn off wave form +5V/20A +5V/20A 2V/div, 10ms/div 2V/div, 10ms/div 5. Hold-up time 6. Over voltage protection Trip point around 6.12V 2V/div Primary DC 0.2kV/div 10ms/div 2V/div, 10ms/div -James- ** This catalogue is only for models selection. For business, engineering specification by model is necessary. AUG. 2003 4-3 ✛✙ General Purpose PFC + 100W (Universal) SNP-Z10 Series 7. +5V step response 8. FCC B +5V 0.5V/div, 2ms/div +5V step from 4A to 20A 10. Thermal profile 9. EN55022 B Test condition: M/N : SNP-Z106, Input : 104V o Output : 5V/20A, Ambient : 25.5 C -James- ** This catalogue is only for models selection. For business, engineering specification by model is necessary. 4-4 AUG. 2003 ✛✚