Skynet SNP-Z10M SERIES • 130 Watt Medical Approved Power Supply • Single & triple Output Models R R H TUV Rheinland Description: SNP-Z10X-M series is modified from the SNP-Z10 series; not only the original characteristics of active PFC and high power density from the SNP-Z10 series are remained, but also the safety requirements to medical power, such as low leakage current, double fuse, 8mm creepage distance for primary to secondary, are designed in. Model available: SNP-Z106-M for 5V/20A SNP-Z107-M for 12V/9A SNP-Z108-M for 15V/7A SNP-Z109-M for 24V/4.5A SNP-Z10T-M for 48V/2.1A SNP-Z101-M for 5V/10A, 12V/3A, -12V/0.8A SNP-Z104-M for 5V/10A, 15V/2.5A, -15V/0.8A SNP-Z10H-M for 28V/3.8A General Specifications: Remote Sense .............. Compensates for 0.5V max. load drop Input voltage ........................................ 90 VAC to 264 VAC Earth leakage .................................. 250uA max. at 240VAC Input frequency .............................................. 47 Hz to 63 Hz o o Operating temperature ...................... 0 C to 50 C convection Inrush current ................................less than 30A at 115VAC Cooling ....................................... Free air convection for 100W less than 60A at 230VAC o with 18CFM forced air flow for 130W cold start, 25 C o o Storage temperature ...................................... -20 C to +85 C Efficiency ..................................... 80%~90% depends on model EMI ........................................................................... FCC "B" Hold up time ....................................................... 20mS typical EN55011 "B", EN61000-3-3 at rated load and 115VAC Harmonics ............................................. EN61000-3-2 class D Over current protection ...................................... auto recovery EMS ....................................... EN61000-4-2,-3,-4,-5,-6,-8,-11 Short circuit protection ...................................... auto recovery Safety .....................................................................UL 2601-1 Over voltage protection ............................................. latch-off CSA 22.2 No. 601 (cUL) EN60601-1 Mechanical Specifications: SNP-Z106-M Notes: 1. Dimensions shown in mm as above. Tolerance: +/-0.4mm. 2. Size: 2.1 SNP-Z106-M, Z107-M, Z108-M, Z109-M, Z10T-M, Z10H-M 127.0mm X 76.2mm X 32.4mm 5" X 3" X 1.28" 2.2 SNP-Z101-M, Z104-M 127.0mm X 76.2mm X 34.4mm 5" X 3" X 1.35" 3. Connectors: AC input : Molex 5277-02A or equivalent DC output : Molex 5273 or equivalent Remote Sense : Molex 5045-02A or equivalent -James- Phone: (800) 392-6318 | www.bravoelectro.com | sales@bravoelectro.com Skynet SNP-Z10M SERIES • 130 Watt Medical Approved Power Supply • Single & triple Output Models Output Specifications: MODEL OUTPUT LOAD VOLTAGE RIPPLE LINE LOAD NO. RAIL MIN. RATED MAX ACCURACY NOISE REG. REG. SNP-Z106-M +5V 0A 20A 26A +4.95V~+5.05V 50mVpp ±0.5% ±1% SNP-Z107-M +12V 0A 9A 11A +11.88V~+12.12V 100mVpp ±0.5% ±1% SNP-Z108-M +15V 0A 7A 8.7A +14.85V~+15.15V 100mVpp ±0.5% ±1% SNP-Z109-M +24V 0A 4.5A 5.4A +23.76V~+24.24V 100mVpp ±0.5% ±1% SNP-Z10T-M +48V 0A 2.1A 2.7A +47.52V~+48.48V 150mVpp ±0.5% ±1% SNP-Z101-M +5V 0.5A 10A 15A +4.95V~+5.05V 50mVpp ±0.5% ±1% +12V 0.05A 3A 4.1A +11.40V~+12.60V 120mVpp ±0.5% ±5% -12V 0A 0.8A 1.1A -11.40V~-12.60V 120mVpp ±0.5% ±5% SNP-Z104-M +5V 0.5A 10A 15A +4.95V~+5.05V 50mVpp ±0.5% ±1% +15V 0.05A 2.5A 4.1A +14.25V~+15.75V 150mVpp ±0.5% ±5% -15V 0A 0.8A 1.1A -14.25V~-15.75V 150mVpp ±0.5% ±5% SNP-Z10H-M +28V 0A 3.8A 4.65A +27.72 ~+28.28V 100mVpp ±0.5% ±1% Note: 1. The total output current is rated load with free air convection and max. load with 18CFM of forced air flow over the unit. 2. At factory, in 60% rated load condition, each output is checked to be within voltage accuracy. 3. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 4. Load regulation is defined by changing ±40% of measured output load from 60% rated load at another output set to 60% rated load. 5. Ripple & noise is measured by using 15MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor and a 47u electrolytic capacitor at rated load and nominal line. 6. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. 7. Efficiency is measured at rated load and nominal line. Phone: (800) 392-6318 | www.bravoelectro.com | sales@bravoelectro.com