Multi-Application Peripherals UL, ULC Listed; FM, CSFM, IDNet™ Communicating Devices and MEA (NYC) Approved* Model 4090-9002 Relay IAM Features 1 - N.C. 5 2 - COM 6 3 +IDNET N.O. 7 - 4 - IDNET 8 IDNet addressable interface modules** for use ® with Simplex models 4010 and 4100U fire alarm control panels 1 5 4090-9002, Individual Addressable Relay Module 2 6 (Relay IAM): 3 7 SIMPLEX TIME RECORDER CO. • A single addressable point provides control and 4090-9002 RELAY IAM status tracking of a Form “C” contact INST. INSTR. 574-184 4 8 DATE CODE: 1 • Low power latching relay design allows IDNet communications to supply both data and module power Compact, sealed construction: 4090 Series IDNet Relay IAM Package • Enclosed design minimizes dust infiltration (shown approximately 1/2 size) • Mounts in standard 4” square electrical box • Screw terminals for wiring connections Specifications • Visible LED flashes to indicate communications (Refer to Installation Instructions 574-184 for additional • Optional covers are available to allow LED to be information.) viewed after installation 4010 or 4100U IDNet, 1 address per UL listed to Standard 864 Communications device Relay IAM Power Supplied by IDNet communications Description Relay IAM Contacts (Form “C”, SPDT) IDNet Relay IAMs allow fire alarm control panels to control a remotely located Form “C” contact using IDNet 2 A @ 24 VDC, for transient suppressed loads addressable communications for both data and module Power-Limited Rating power. Typical applications would be for switching local 1 A @ 24 VDC for inductive loads power for control functions such as elevator capture, or control of HVAC components, pressurization fans, 1/2 A @ 120 VAC, for transient Nonpower-Limited Rating dampers, etc. Relay status is also communicated requiring suppressed loads only one device address. Screw terminals for in/out wiring, Wire Connections 2 18 to 14 AWG wire (0.82 to 2.08 mm ) Product Selection Up to 2500 ft ( 762 m) from fire alarm Model Description control panel 4090-9002 Relay IAM Up to 10,000 ft ( 3048 m) total wiring IDNet Wiring Reference distance (including T-Taps) Optional Trim Plates Compatible with Simplex 2081-9044 Model Description Overvoltage Protectors For semi-flush Trim plate with LED 4090-9801 4-1/8” H x 4-1/8” W x 1-3/8” D mounted box viewing window, includes Dimensions (105 mm x 105 mm x 35 mm) mounting screws; painted For surface 4090-9802 beige mounted box Housing Material Black thermoplastic Mounting Plate Material Sheet metal, galvanized 32° to 120° F (0° to 49° C), Temperature Range * This product has been approved by the California State Fire Marshal (CSFM) pursuant to intended for indoor operation Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7300-0026:223 for allowable values and/or conditions concerning material presented in this Humidity Range Up to 93% RH at 100° F (38° C) document. It is subject to re-examination, revision, and possible cancellation. Accepted for use – City of New York Department of Buildings – MEA35-93E. Additional listings may be applicable; contact your local Simplex product supplier for the latest status. ** IDNet addressable communications are protected by U.S. Patent No. 4,796,025. S4090-0002-5 4/02 Relay IAM Mounting Information Address setting under resealable label 4" (102 mm) square box, 2-1/8" (54 mm) minimum depth, RACO 232 or equal (supplied by others) 4090-9002 Relay IAM Double gang blank cover plate and mounting screws, for use when LED is not required to externally viewed (supplied by others) Mounting Reference, Double Gang Blank Cover Plate 4-9/16" 4-5/16" Light pipe for LED viewing (116 mm) (109 mm) 4-9/16" (116 mm) 4-5/16" (109 mm) 4090-9801, Trim plate for 4090-9802, Trim plate for semi-flush mounted box surface mounted box Optional Trim Plates for Visible LED Tyco, Simplex, the Simplex logo, and IDNet are trademarks of Tyco International AG or its affiliates in the U.S. and/or other countries. TEPG-US • 91 Technology Drive • Westminster, Massachusetts • 01441-0001 • USA S4090-0002-5 4/02 © 2002 TEPG-US (a Tyco company). All rights reserved. All specifications and other information www.tepg.com shown were current as of document revision date and are subject to change without notice.