SiliconSystems, Inc. 26940 Aliso Viejo Parkway Aliso Viejo, CA 92656 Tel: 949.900.9400 Fax: 949.900.9500 www.siliconsystems.com TM SiliconDrive CF: 128MB to 4GB of Solid-State Storage 4G 4GB B S SS SD-C04 D-C04G GI-xx I-xxx xx x Overview SiliconDrive™ CF products replace the functionality of rotating hard disk drives while providing Features enhanced levels of performance and reliability for Enterprise System OEMs targeting the netcom, • ATA-3 Compliant military, industrial, interactive kiosk and medical markets. Typical end-market applications include • Capacity Range: 128MB to broadband data and voice networks, military 4GB systems, flight system avionics, medical equipment, industrial control systems, and interactive kiosks. • Supports Both 8 and 16 Bit Data Register Transfers SiliconDrives are designed to meet the growing • Supports Dual Voltage 3.3V OEM demands for high performance, high reliability, or 5V Interface multi-year product lifecycles, low power 14 consumption, compact size, and reliable operation • Less than 1 Error in 10 Bits in extreme environments. SiliconDrive CF Type I Read form factor products are available in capacities • MTBF > 4,000,000 Hours ranging from 128MB to 4GB. • Industry Standard Type I CF SiliconSystems patented PowerArmor™ technology Form Factor provides enhanced levels of drive integrity in the • Solid-State, No Moving Parts event of unexpected power disturbances and is integrated as a standard feature on all SiliconDrives. • Supports PIO Modes 0-4 and In addition, patent-pending technology advances of DMA Modes 0-2 data sanitization and purge, write protection, and • High Shock & Vibration application-specific performance enhancements are Tolerance available as options on all SiliconDrive products. Separate application notes covering these topics are available under NDA. Rev. 1.05s-3 SILICONSYSTEMS PROPRIETARY April 21, 2005 1. PHYSICAL SPECIFICATIONS SiliconDrive CF products are offered in an industry standard Type I form factor. Refer to Section 10.1 Part Ordering Nomenclature for details regarding CF capacities. 1.1. Physical Dimensions The following diagram describes the CF Type I physical dimensions and pin orientation: Rev. 1.05s-3 SILICONSYSTEMS PROPRIETARY April 21, 2005 2. 1 PRODUCT SPECIFICATIONS 2.1. System Performance Reset to Ready Startup Time (Typical/Max) 200ms/400ms Read Transfer Rate (Typical) 8MB/s 6MB/s Write Transfer Rate (Typical) Burst Transfer Rate 16.7MB/s Controller Overhead (Command to DRQ) 2ms (max) 2.2. System Power Requirements DC Input Voltage 3.3 ± 10% 5.0 ± 10% Sleep (Standby Current) <0.5mA <1.0mA Read (Typical/Peak) 20mA/75mA 30mA/100mA Write (Typical/Peak) 30mA/75mA 40mA/100mA 2.3. System Reliability MTBF (@ 25ºC) > 4,000,000 Hours 14 Data Reliability < 1 Non-Recoverable Error in 10 Bits Read Endurance >2,000,000 write/erase cycles 1 All SiliconDrive CF values quoted are typical at 25°C and nominal supply voltage. Rev. 1.05s-3 SILICONSYSTEMS PROPRIETARY April 21, 2005 2.4. Product Capacity Specifications Formatted Number Number Number Product Number of Capacity of of of Density Sectors/Track (Bytes) Sectors Cylinders Heads 128MB 130,154,496 254,208 993 8 32 256MB 260,571,136 508,928 994 16 32 512 MB 521,773,056 1,019,088 1011 16 63 1GB 1,047,674,880 2,046,240 2030 16 63 2GB 2,098,446,336 4,098,528 4066 16 63 4GB 4,224,761,856 8,251,488 8186 16 63 2.5. Environmental Specifications 0ºC to 70ºC (Standard) Temperature -40ºC to 85ºC (Industrial) Humidity 8% to 95% non-condensing Vibration 16.3gRMS, MIL-STD-810F, Method 514.5, Procedure I, Category 24 Shock 1000G, Half-sine, 0.5ms Duration 50g Pk, MIL-STD-810F, Method 516.5, Procedure I Altitude 80,000ft, MIL-STD-810F, Method 500.4, Procedure II Rev. 1.05s-3 SILICONSYSTEMS PROPRIETARY April 21, 2005 10. SALES AND SUPPORT To order or to obtain information on pricing and delivery, please contact your SiliconSystems Sales Representative. 10.1. Part Numbering Nomenclature The following table defines the SiliconDrive CF Card part numbering scheme: Definition SSD- C YYY T -XXXX SiliconSystems Proprietary Temp. Range: Blank=Commercial, I=Industrial Capacity: 04G=4GB / 12M=128MB Form Factor: C=CF SiliconSystems SiliconDrive Operating Temperature Range: Commercial: 0°C to 70°C, Industrial: -40°C to +85°C Note: XXXX = 3012 for SiliconDrive CF with fixed ID bit and DMA support; XXXX = 3021 for fixed ID bit and DMA disabled; XXXX = 3038 for removable ID bit and DMA support; XXXX = 3005 for removable ID bit and DMA disabled. Other configurations are available. Please contact your SiliconSystems Sales Representative for more details. Part Number Description SSD-C04G-xxxx 4GB SiliconDrive CF, Commercial Temp SSD-C02G-xxxx 2GB SiliconDrive CF, Commercial Temp SSD-C01G-xxxx 1GB SiliconDrive CF, Commercial Temp SSD-C51M-xxxx 512MB SiliconDrive CF, Commercial Temp SSD-C25M-xxxx 256MB SiliconDrive CF, Commercial Temp SSD-C12M-xxxx 128MB SiliconDrive CF, Commercial Temp SiliconSystems' performance tests, ratings and product specifications are measured using specific computer systems and/or components and reflect the approximate performance of SiliconSystems’ products as measured by those tests. Any difference in system hardware or software design or configuration, as well as system use, may affect actual test results, ratings and product specifications. SiliconSystems may change its product specifications or its products at any time and without notice. SiliconSystems™, SiliconDrive™, PowerArmor™, and the SiliconSystems logo are trademarks or registered trademarks of SiliconSystems and may be used publicly only with permission from SiliconSystems and require proper acknowledgement. Other listed names and brands are trademarks or registered trademarks of their respective owners. Rev. 1.05s-3 SILICONSYSTEMS PROPRIETARY April 21, 2005