‡ SIGNET 9010 Intelek-Pro™ Flow Controller Features • 110/220 VAC and/or 17 to 30 VDC for Uninterruptable Operation • Modular Output Options • Resettable 8-digit Totalizer • 4 1/2 Digit Rate Display • Sensor and Totalizer Pulse Outputs • 0 to 5 KHz Frequency Input • High Accuracy: ±0.05% of Reading • Programmable Secu- rity Code Application • Filtration Monitor and Totalization • Flow-based Propor- tional Addition • Flow Control Description • Effluent Totalization The +GF+ SIGNET 9010 offers extreme UPS capable, the flow controller can be • Cooling Flow Total- accuracy with simple front panel push- powered by AC and DC simultaneously. ization button calibration. Programmable Modular construction allows installation • Pump Protection security code capability allows use in of several output options for alarming, applications where totalization is critical. recording or control. Options Sensor Options Intelek-Pro™ 3-9010 Technical Features Select up to three output cards for maximum system flexibility. Modular for field upgrade or service. Options allow: dual alarming (2-relay) + 1 or 2 analog outputs 4 to 20 mA Frequency 4 to 20 mA3 0 to 5 VDC3 0 to 20 mA3 Output Card Output Card 2-Relay 3 Sensor 3 0 to 10 VDC3 Card Input Cards Ouput Card www.gfsignet.com P51530-xx 3-8510-xx 3-2517 3-2536-xx 3-2550 3-8512-xx 3-2000 P525 3-2100 3-2540 3-2507 4-20 mA 90 x 90 mm3 3.54 x 3.54 in. Dimensions Panel3 gasket Optional NEMA 4X/IP65 Rear Cover Mounting panel Mounting clamp (included, 2 ea.) 96 mm/3 88 mm/3 3.5 in.3 3.8 in.3 square square SIDE VIEW 145 mm/5.7 in. 152 mm/6 in. 183 mm/7.2 in. 13 mm/0.5 in. Required panel cutout Installation • The controller is designed for panel mounting. An optional NEMA 4X/IP65 rear cover (3-5000.395) is available for bracket installation (3-5000.598). Meter may be mounted up to 30.5 m (100 ft.) from coil-type sensors and up to 305 m (1000 feet) from Hall-effect or open-collector sensors. +GF+ SIGNET offers a veriety of flow sensors to complete your system. ‡ SIGNET Flow Sensors Rugged & Precise Low Flow 2000 Lo Flow D + + GF XX DN XX X XX 2100 Turbine FLOW 2550 3 2560 3 7000, 70013 Magmeter Insertion Magmeter Vortex 2507 Paddlewheel Economical/Simple Paddlewheels FLOW 515 Insertion 2536 Low Flow 525 316SS 2517 Brass (adj.) 2540 316 SS (adj.) Paddlewheel Paddlewheel Paddlewheel Paddlewheel Paddlewheel www.gfsignet.com Rear Terminal View 10 987 6 1) AC IN: 90 to 132 VAC or 180 to 264 VAC system power connection 2) DC IN: 17 to 30 VDC system power connection 3 OUTPUT ANL2 A in SENSOR 3) RLY 1: Alarm relay #1 (COM, NO, NC) contact set SS CNT GND PLS R+ R- A+ A- BLK RED SHLD for external device control (optional) 4) RLY 2: Alarm relay #2 (COM, NO, NC) contact set for external device control (optional) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 5) ANL 1: Analog output #1 from option socket #1 (optional) 6) Sensor: Flow sensor input connection (frequency) 15 16 17 18 19 20 21 22 23 24 25 26 27 28 7) A in: Analog signal input connection (optional) 8) ANL 2: Analog output #2 from option socket #2 (optional) 3 L1 N + GND NO C NC NO C NC R+ R- AC IN DC IN RLY1 RLY2 ANL1 9) Output: CNT emits an open collector pulse output for each increment of totalizer. PLS emits a TTL frequency output in phase with the sensor input 10) SS: Unused terminal 12 34 5 NOTE: Rear terminals accept 18 to 22 AWG wire Technical Data General Electrical Compatible Sensors: Power Requirements: +GF+ SIGNET Flow Sensors 17 to 30 VDC @ 0.5 max. and/or Accuracy: ±0.05 of reading 90 to 132 VAC @ 50 to 60 Hz, or Enclosure: 180 to 264 VAC @ 50 to 60 Hz (jumper selectable) Rating: NEMA 4X/IP65 front Sensor Input Range: Case: ABS Plastic Frequency: 0 to 5 KHz Overlay: Mylar K-Factor Range: 0.0001 to 19999 Weight: 1 .2 Kg (2.6 lbs.) Min. Signal Amplitude: 0.2 V P-P Display: Time Base: 4.5 digits, 0.5 in. high (upper) seconds, minutes, hours, days 8 digits, 0.3 in. high (lower) Current Input Card (isolated) - optional Range: 0.000 to 19999 Input Range: 4 to 20 mA or 0 to 20 mA Contrast: user selectable Range: Software Selectable Memory: Nonvolatile RAM Time Base fixed to minutes only Environmental Input Impedance: 100Ω Operating Temperature: Sensor Pulse Output 0 to 55°C (32 to 131°F) TTL Compatible Pulse Storage Temperature: Max. Current Sink: 20 mA -15 to 80°C (5 to 176°F) Max. Current Source: 10 mA Relative Humidity: Counter Pulse Output 0 to 95% non-condensing Open-collector transistor Standards and Approvals Max. current sink 50 mA @ 30 VDC max. • Meets IEC 801-2, level 3 4 to 20/0 to 20 mA Output Card (opt.): • Meets IEC 801-3, level 2 Response time: 2.5 sec. max. for 100% change • Manufactured under ISO 9001 Max. loop resistance: 425Ω, internally powered Isolation: 500 VDC to earth ground Range: Jumper selectable on card 2-Relay Output card (opt.): Outputs: 2 SPDT contact outputs, 5 A @ 250 VAC or 30 VDC max. 0 to 5 or 0 to 10 VDC Output Card (opt.): Response time: 2.5 s max. for 100% change Min. load resistance: 1kΩ Isolation: 500 VDC to earth ground www.gfsignet.com Description Mfr. Part No. Code Description 3-9010.111 159 000 375 Flow Controller, Frequency Input, 120 VAC / 17 to 30 VDC 3-9010.121 192 211 000 Flow Controller, Frequency Input, 240 VAC / 17 to 30 VDC 3-9010.110 159 000 374 Flow Controller, No Input, 120 VAC / 17 to 30 VDC 3-9010.400-1 198 840 621 Frequency Input Card 3-9010.400-3 198 840 623 4 to 20 / 0 to 20 mA Input Card Accessories Mfr. Part No. Code Description 3-9000.440-1 198 840 641 2-Relay card 3-9000.450-1 198 840 631 4 to 20/0 to 20 mA, non-isolated 3-9000.450-2 198 840 632 0 to 5 VDC, non-isolated 3-9000.450-3 198 840 633 0 to 10 VDC, non-isolated 3-9000.460-1 198 840 634 4 to 20/0 to 20 mA, isolated 3-9000.460-2 198 840 635 0 to 5 VDC, isolated 3-9000.460-3 198 840 636 0 to 10 VDC, isolated 3-5000.395 198 840 227 NEMA 4X Back Cover Kit 3-5000.399 198 840 224 5” x 5” AdapterKit 3-5000.598 198 840 225 Mounting Bracket 3-9000.390 159 000 366 Mounting Kit Assembly 3-9000.391 159 000 367 Front Gasket Kit 3-9000.392 159 000 368 Liquid Tight Connector Kit 3-9000.525-1 198 840 206 Bezel 3-9000.575 198 840 207 Mounting Gasket 3-9010.390 159 000 377 Flow Display Engineering Specifications • • • • • The flow controller front panel shall be sealed to NEMA 4X/IP65 requirements. • The flow controller shall be manufactured under ISO 9001 certified processes. • The flow controller input shall accommodate compatible flow sensor signals from 1 Hz to 5KHz and provide displays and outputs for liquid flow measurement and control. • The flow controller shall also accumulate engineering unit totals up to 99,999,999. • The flow controller shall provide functional options, including pump-pulsing capability, on field-installable modular plug-in cards. • The flow controller shall be programmable with front panel keys for calibration, to set K factors from 0.0001 to 19,999, to select output and display functions, to reset resettable totalizers and to program security functions. • The flow controller shall support programming and display functions with a 4-1/2 digit alphanumeric LCD upper display, an 8digit alphanumeric LCD lower display, and four relay status annunciators. • Display accuracy shall be ±0.05% of reading. • The flow controller shall provide up to two optional 4 to 20 mA current loop outputs or 0 to 5 VDC or 0 to 10 VDC, either isolated or non isolated, shall be available. The isolated options shall provide isolation up to 500 VDC to earth ground. • The flow controller shall allow two optional SPDT alarm relays. • The flow controller shall be compatible with all +GF+ SIGNET powered and non-powered flow sensors. • The flow controller shall be +GF+ SIGNET, Model 9010 Flow Controller. www.gfsignet.com