Pgs 302-335 8/10/04 6:06 PM Page 306 i10 Lock Safety interlocks i10 Lock The i10 Lock is a safety interlock that is electrical lock), the guard can be opened guard lock capable. It can prevent the only by removing voltage from the coil. machine guard from opening until the This device is an ideal solution for release mechanism is activated. This machinery with long stopping time, when device is available with 2 forced opening, premature interruption of the machine normally closed contacts (NC), 1 could cause damage to tools and signaling, normally open contact (NO), components or cause additional hazards and with 1 normally closed contact (NC) for the operator. for guard condition monitoring. The i10 Lock head can be turned (4 x 90°) and The locking mechanism can tolerate provides five ways of access for the holding forces up to 1200 N. The actuator. With the i10 Lock M version auxiliary manual release mechanism (with mechanical locking), the guard can (3-way) releases the guard in the event be opened only by applying voltage to of general failure or of a power interruption. the coil. With the i10 Lock E version (with 306 SAFETY CATALOG 2004 Pgs 302-335 8/10/04 6:06 PM Page 307 i10 Lock Drawings Automatic unblocking mechanism Mechanical unblocking screw Technical specifications i10 Lock Housing material glass-reinforced plastic Environmental protection to IEC 60529 i 10-M/E...3 IP 67 i10-M/E...2 IP 65 6 Mechanical service life 10 switching cycles Ambient temperature -20…55° C Mounting position optional Approach speed (max.) 20 m/min Frequency of approach (max.) max 7000 h Switching principle slow acting Contact material Silver alloy, gold plated 2 Conductor cross section i10-M/E...3 max 1.5 mm 2 i10 M/E...2 0.5 mm Rated insulation voltage U i10-M/E...3 U = 250 V i i i10-M/E....2 U = 50 V i Utilization category to IEC 60947-5-1 i10-M/E...3 AC-15 230 V, 6 A, DC-13 24 V, 6 A i10-M/E...2 AC-15 50 V, 4 A, DC-13 24 V, 4 A Switching voltage (min.) 12 V Switching current (min.) at 24 V 10 mA Short-circuit protection i10-M/E...3: 6 A gG (Control circuit fuse) IEC 60269-1 i10-M/E...2: 4 A gG Solenoid operating voltage AC/DC 24 V (+ 10%...-15%) AC 110 V AC 230 V Duty cycle 100% Power consumption 8 W Actuating force 8 N Retaining force (max.) 1200 N SAFETY CATALOG 2004 307 Locking Devices Plastic Housing Pgs 302-335 8/10/04 6:06 PM Page 308 i10 Lock Switching elements Actuator introduced Actuator disconnected blocked unblocked Allocation Contact NC positive guide to NO Contact NC positive guide to 1 NC carry 1 NC Changing direction of approach The small head can be oriented A according to the desired insertion direction by unscrewing the four clamping screws. The switch is supplied with the small head set positioned in the A direction Product selection table Block function Reel voltage Connection type Model Connection part number mechanical electrical 24 V DC 110 V AC 230 V AC PG 13.5 SR 11 M 20 i10 - M 230 1 6 012 137 i10 - M 024 2 6 012 139 i10 - E 024 2 6 012 140 i10 - M 0 23 3 6 022 580 i10 - E 0 23 3 6 022 585 i10 - M 2 23 3 6 022 582 i10 - E 2 23 3 6 022 586 i10- M 1 23 3 6 022 581 i10- E 1 23 3 6 022 587 i10 M 0 23 2 6 025 101 We recommend contacting Customer Service for product selection. 308 SAFETY CATALOG 2004 Pgs 302-335 8/10/04 6:06 PM Page 309 i10 Lock Accessories Actuator straight iE10-S1 - Minimum door radius 1000 mm Part number 5 306 527 Actuator at 90° iE10-A1 - Minimum door radius 1000 mm Part number 5 306 535 iE10-R2 radius actuator – Minimum door radius 100 mm Part number 5 306 529 V Adjustment ite di regolazione screw Vite di Adjustment regolazione screw SAFETY CATALOG 2004 309 Locking Devices Plastic Housing Pgs 302-335 8/10/04 6:06 PM Page 310 i10 Lock Accessories Radial actuator for top and bottom hinged doors Minimum door radius: 90 mm iE10-R1 Part number 5 306 528 adjustment Vite di screw regolazione V adjustment ite di regolazione screw Accessories: connector and cable glands Connector technical specifications Housing material plastic Number of PIN 12 (11+PE) Nominal voltage 50 V ~/= Protection class IP 65 2 Connection type contact crimp 0.5…1.5 mm Selection table Type Number of PIN Part number SSR 11, connector straight 11+PE 6 020 757 ASR 11, connector angled 11+PE 6 020 758 Connector side limit stop 11+PE 6 020 759 Cable gland M16 5 309 163 Cable gland M20 5 309 163 Cable gland PG 13.5 5 305 811 310 SAFETY CATALOG 2004 Pgs 302-335 8/10/04 6:06 PM Page 311 i10 Lock Accessories Actuator flexible straight iE10-S2 - minimum door radius 1000 mm Part number 5 306 530 Lockable bar iE10-S3 Part number 5 306 536 When opening the guard, this lockable bar is inserted within the safety switch head. Once the bar is in the head, a lock is placed in one of the holes in order to prevent the guard from closing behind the operator. Unlocking key iE10-K1, iE10-K2 Part number K1: 5 308 269, K2: 5 308 270 locked auxiliary unlocking device safety screw unlocked SAFETY CATALOG 2004 311 Locking Devices Plastic Housing