Manufacturers
SHINDENGEN FYX 131/66T-BEeb
Description
130W AC input, Quad output; 5V/20A, 15V/4.8A, -15V/1A, -5V/1A U-frame power supply with Terminal block connectors.
Part Number
FYX 131/66T-BEeb
Price
Request Quote
Manufacturer
SHINDENGEN
Lead Time
Request Quote
Category
PRODUCTS - F
Datasheet
Extracted Text
130 Watt FYX Series FEATURES • Smallest, fully-featured 130-watt power supply available 4.00 x 6.20 x 1.34 inches • High power density • U channel with optional cover • Universal input • Power factor corrected to IEC 1000-3-2 • UL1950/CSA22.2 No.950-951/EN60950/CE • FCC/VDE Class B EMI filter • Quad output, various output combinations • Molex pin connector, terminal block • MTBF - Over 400,000 hours SPECIFICATIONS Overload All models are protected against INPUT Voltage 90-264 VAC (continuous range) overload on the primary side to a Frequency 47-63 Hz maximum of 160W. Recovery Current is automatic after removal of the Full Load 100 VAC - 1.8A (RMS) fault. 200 VAC - 1.0A (RMS) Common Mode Noise 1.5V (peak-to-peak) Inrush 120 VAC - 35A Electrical Fast Transient/ (cold start) 240 VAC - 70A Burst +/-2000V, 50nS to IEC 1000-4-4 ESD Tolerance +/-8KV to IEC 1000-4-2 Power Factor 98% (typ) at 115 VAC Surge Tolerance Input-Input +/-1KV to IEC1000-4-5 { Input-Chassis +/-2KV to IEC1000-4-5 OUTPUT Rated Power 130 watts (convection cooled) Susceptibility to Radio Frequency, Efficiency 82-85% (typ) Electromagnetic Field 80-1000 MHz 10V/m 80%AM (1 KHz) to Voltage See model selection table IEC1000-4-3 Voltage Adjustment All outputs are fixed Susceptibility to Radio Frequency, Total Regulation Output 1 (main) +5% Common Mode 0.15-80 MHz 10V 80%AM to IEC1000-4-6 Output 2 +10% Output 3&4 +5% These outputs are INSULATION 3 terminal regulators. All models meet the requirements of UL1950, CSA22.2 No. 950 and Ripple & Noise Output 1 (5V) - 50mV (peak-to-peak) Output 2 (12V, 15V, 24V) - 1.5% Leakage Current specifications. Output 3,4 (+/-12V, +/-15V, -5V) - 1% Isolation Voltage (measured at 25°C with a bandwidth Primary-Frame Ground 1500 VAC of 50 MHz) Primary-Secondary 3000 VAC Hold-up Time 10mS Secondary-Frame Ground 500 VDC (measured with an input of 90-264 VAC Insulation Resistance and 100% rated output) Primary-Frame Ground 100 MΩ at 500 VDC Converter Topology Resonant Converter Primary-Secondary 100 MΩ at 500 VDC Operating Frequency 80-110 KHz Secondary-Frame Ground 100 MΩ at 500 VDC ENVIRONMENT PROTECTION Overvoltage Outputs1&2 are protected against over- Operating Temp. 0°C to + 60°C voltage. The control circuit is preset so (derated linearly above 50°C at 5%/°C) the output voltage does not exceed the Cooling Method Convection following values: Storage Temp. -30°C to + 85°C Output Voltage 5 12 15 24 Shock 10G OVP Setpoint (max) 6 15 20 30 Vibration X,Y, Z 4.5G, 10 - 55 Hz, 0.75mm amplitude, Outputs 3,4 which are three terminal reg- 2 hours (non-operating) ulated are not overvoltage protected MODEL RATINGS Output Rating Model # Output #1 (V1) Output #4 (V4) Output #2 (V2) Output #3 (V3) 5V -12V 0-1A 0-20A +12V 0-6A(8Apk) -5V 0-1A FYX 131/61* - BDdb 5V +12V 0-1A 0-20A +12V(2) 0-6A(8Apk) -12V 0-1A FYX 131/62* - BDDd 5V +15V 0-1A 0-20A +24V 0-3A(4Apk) -15V 0-1A FYX 131/63* - BGEe 5V +12V 0-1A 0-20A +24V 0-3A(4Apk) -12V 0-1A FYX 131/64* - BGDd 5V +12V 0-1A 0-20A +12V 0-6A(8Apk) -5V 0-1A FYX 131/65* - BDDb 5V -15V 0-1A 0-20A +15V 0-4.8A(6.4Apk) -5V 0-1A FYX 131/66* - BEeb 5V +24V 0-1A 0-20A +12V 0-6A(8Apk) -12V 0-1A FYX 131/67* - BDGd *Insert “P”for molex pin version or “T”for terminal block version after model number. Note: A minimum load of 2.5W is required on either Output 1 or Output 2 or as a combination of these Outputs. 1-800-634-3654 130 Watt FYX Series MECHANICAL SPECIFICATIONS Size (W + D + H) 4.00 x 6.20 x 1.34 inches (102 x 157 x 34 mm) .19 .47 (12) (5.0) 2-M3 4.6+0.004 (117+0.1) .47 (12) 0.06 2-M3B 1.34 (34) 6.2 (157.5) CONNECTOR DESIGNATION Molex Pin Type Terminal Block Type CN1 1 L Connector: Molex 41791 3 Pin TB1 1 L 3mm screw type 2 NC 26-60-4030 2N 3 N Mate: Molex 2139 series/ TB2 8 Common 3mm screw type 09-50-3031, Pin #2478 7 Common CN2 1 Common Connector: Molex 41791 8 Pin 6 Output 1 2 Common 26-60-4080 5 Output 1 3 Common Mate: Molex 2139 series/ 4 Common 09-50-3081, Pin #2478 3 Output 2 4 Common 2 Output 3 5 Output 1 1 Output 4 6 Output 1 7 Output 1 8 Output 1 CN3 1 Common Connector: Molex 41791 7 Pin Power Fail 1 Gnd Connector: Molex 6373 3 Pin 2 Common 26-60-4070 CN4 2 Gnd 22-23-2031 3 Output 2 Mate: Molex 2139 series/ 3 PF Mate: Molex 2695 series/ 09-50-3071, Pin #2478 22-01-2037, Pin #2759 4 Output 2 All specifications are subject to change without notice. 5 Output 3 6 Common 7 Output 4 1-800-634-3654 4.0 (101.6) 4.0 (101.6) 1.05 (26.8) .98 (25) 2.67 (67.8) 2.19 +.0.004 (55.8+0.1) .98 (25) 4.0 (101.6)
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the FYX 131/66T-BEeb have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods