Shimaden, Temperature and Humidity Control Specialists °C Series SD16 & KR16 %RH SHIMADEN DIGITAL INDICATORS ® & approved NRTL /C BASIC FEATURES DIN Size 48 x 96 mm ± 0.3% High Accuracy Indication Large 20 mm bright display Make reading from long distance and low light location easier Multi-inputs & Multi-ranges User selectable Thermocouple, RTD, V, mV and Current inputs A 250Ω resistor is required across the input terminal for 4-20mA DC Inverse scaling possible With voltage and current input signals, normal and inverse scaling is possible. Additionally, normal and inverse scaling is possible for the analog output signals. Dust and splash proof front panel Equivalent to IP66 Wide range of optional features Alarms, analog output signals and communication interface (RS232C or RS485) available A six-point selector switch, (the KR16 series), is available for combined use. Series SD16 SPECIFICATIONS Display • Digital display : Process value (PV) 7 segment Red LED 4 digits (H: 20mm) • Action display :1 point of parameter display (SET) by green LED :1 point of communication display (COM) by green LED :2 points of alarm (AL1, AL2) by red LED • Display accuracy :±(0.3% FS+1 digit) within measuring range : Excluding cold junction temperature compensation accuracy in the case of thermocouple input :±5%FS for temperature below 400˚C of thermocouple B : When the thermocouple [T, U] indication value is 0~100˚C, 0.5%FS and when it is below -100˚C, 1%FS • Display accuracy range : 23˚C±5˚C (18~28˚C) • Display resolution : Depends on measuring range (0.001, 0.01, 0.1, 1) • Measured value display range : -10~110% of measuring range (Accuracy guaranteed for value is within measuring range only) : For R.T.D. input of -200~600˚C: 210~680˚C : For thermocouple [K] input of -199.9~800˚C: -273.1~900.0 ˚C •Display update cycle : 0.5~5.0 seconds (0.5 steps) When 0.5 second or more is set, there may occur a difference among the displayed value, the analog output and the communication data. Setting • Setting : By four (4) front key switches • Setting range : Same as measuring range Input •Type of input :Three-type multiple input of Thermocouple, R.T.D., Voltage (mV, V) • Thermocouple : B, R, S, K, E, J, T, N, {U, L (DIN 43710)}, WRe5-26 Refer to measuring range code table • External resistance : 100Ω max. : 500KΩ max. • Input impedance •Burnout : Standard feature (Up-scale) •Cold junction temperature :±1˚C (18~28˚C range) compensation accuracy :±2˚C (5~18˚C, 28~45˚C range) (±5˚C to the negative side of measuring range in case of T and U input) :JIS Pt100Ω 3-wire type • R.T.D. • Amperage : Approx. 0.25mA • Lead wire tolerable resistance :5Ω max. / wire (3 lead wire should have same resistance) When the resistance value of each wire is same 0~5Ω: 0.05˚C, 5~10Ω: 0.2˚C, 10~20Ω: 0.6˚C, 20~30Ω: 1.4˚C max. : 0~10mV DC •Voltage (mV) •Voltage (V) : 0~5V, 1~5V, 0~10V DC • Input impedance : 500KΩ min. • Current : 4~20mA DC • Input impedance : 250Ω [A shunt resistor (option) needs to be connected to the terminal] : Scaling possible for voltage (mV, V) or current (mA) input and inverse • Input scaling function scaling possible. • Scaling range : -1999~9999 unit • Span : 10~5000 unit • Position of decimal point : None, 0.0, 0.00, 0.000 : 0.5 seconds • Sampling cycle • PV bias :±200 unit • PV filter : 0~100 seconds (0 = without filter) • Isolation : Between input and analog output Alarm output (option) • Number of alarm points :2 (AL1 and AL2) for both normal open and common • Alarm type : Selectable from combinations of the following 4 types : High limit absolute value without inhibit action : High limit absolute value with inhibit action : Lower limit absolute value without inhibit action : Lower limit absolute value with inhibit action • Alarm setting range :Within measuring range or within full scaling range • Alarm action : ON-OFF action • Alarm sensitivity : 1~999 unit Within measuring range •Alarm output / rating : Contact 1a (common) / 240V, AC1.5A (resistive load) • Alarm output update cycle : 0.5 seconds Series SD16 SPECIFICATIONS Analog output (option) • Analog output type : 0~10mV DC (output resistance: 10Ω) : 0~10V DC (load current: 1mA max.) : 4~20mA DC (load resistance: 300Ω max.) • Output resolution : Approx. 0.03% (1/3000) • Output accuracy :±(0.3%FS + 1 digit) of display value • Output scaling :Within measuring range (inverse scaling possible) • Output update cycle : 0.5 seconds Communication (option) • Communication type : RS-232C, RS-485 • Communication system : Half duplex start-stop synchronized system • Communication speed : 1200, 2400, 4800, 9600, 19200 bps • Data bit length :7 bit even parity 1 stop bit 8 bit non parity 1 stop bit • Communication address : 1~255 • Multi-drop connection : 31 max. (with RS-485) • Communication delay : 0~50.0 milli-seconds • Communication code : ASCII code Others • Data storage : By non volatile memory (EEPROM) • Ambient conditions for use Temperature and Humidity : -10~50˚C/90%R max. (on condition that there is no dew condition) • Height : 2000m above sea level or lower : Category II • Installation category • Degree of pollution : Degree 2 • Power supply voltage : 100~240V AC±10%, 50/60Hz 24V AC/DC ±10% (option) • Power consumption :11VA (AC) max., 7W (DC) max. • Applicable standard Safety : IEC 1010-1 and EN61010-1 EMC : EN61326 (EMC testing Display accuracy: +5% FS) : IP66 (Complies with the IEC 529-IP66) • Dust proof/Drip proof • Insulation resistance : Between input/output terminal and power supply terminal: 500V DC 20MΩ minimum : Between input/output terminal and protective conductor terminal 500V DC 20MΩ minimum :1 min. at 2300V AC between input/output terminal and power supply • Dielectric strength terminal :1 min. at 1500V AC between power supply terminal and protective conductor terminal • Case material : PPO resin molding (equivalent to UL94V-1) : H48 x W96 x D110 mm • External dimensions • Mounting : Push-in panel (one-touch mount) • Panel thickness : 1.0~4.0 mm • Panel cutout : H45 x W92 mm •Weight : Approx. 250g Series KR16 SPECIFICATIONS Selector KR16 series • No. of switching points :6 • No. of switching circuits :2 • Switching operation method : Push button switching • Applicable signal contact rating : DC voltage, current (R.T.D.is not applicable) • Contact method : Contact slide •Voltage : 30V DC max. • Current : 100mA DC max. • Contact resistance : 300m Ω max. • Operating ambient temperature range : -10~50˚C • Operating ambient humidity range : 90% RH max. • Material : PPO resin • Color : Case : Munsell No. N-1 or compatible Front Panel: Munsell No. N-1 or compatible • External dimensions : H48 x W96 x D118 (panel depth: 100) mm • Panel cutout : H45 x W92 mm • Mounting : Push-in panel (one-touch mount) • Panel thickness : 1.0~4.0 mm •Weight : Approx. 250g APPLICATION EXAMPLE 1. Selection of T. C. Switching 2. Selection of Voltage Switching T. C. T. C. Converter Compensating Lead Wire Copper Lead Wire Compensating Lead Wire Copper Lead Wire Indicator Voltage KR16 Indicator KR16 Converter R. T. D. Recorder Recorder 3. Selection of Analog Output (Voltage) 4. Installation Example With SD16 Control Signal Controller SD16 Analog Output SD16 Indicator KR16 KR16 Analog Output Controller KR16 Control Signal Recorder Series SD16 ORDERING INFORMATION ITEM CODE SPECIFICATIONS 1 SERIES SD16- Digital Indicator DIN Size 48 × 96 mm Current (4~20mA DC) 4 A shunt resistor (option) needs to be connected to the terminal *Thermocouple B, R, S, K, E, J, T, N, 2 INPUT {U, L (DIN 43710)} Value set at K 0~1200˚C 8Multi input *R.T.D. Pt100Ω when shipped *Voltage (mV, V) 0~10mV DC, 0~5V DC, 0~10V DC, 1~5V DC 90- 100~240V AC±10% (50/60Hz) 3 POWER SUPPLY 08- 24V AC ±10% (50/60Hz) / 24V DC ±10% 0 None 4 ALARM OUTPUT (OPTION) Individual setting, individual output 2 points (1c contact) 1 Contact capacity: 250V AC 1.5A / resistive load 0 None 3 0~10mV DC Output resistance: 10Ω 5 ANALOG OUTPUT (OPTION) 4 4~20mA DC Load resistance: 300Ω max. 6 0~10V DC Load resistance: 1mA max. 0 None 6 COMMUNICATION FUNCTION (OPTION) 5 RS-485 7 RS-232C 0Without 7REMARKS 9With (Please consult before ordering) MEASURING RANGE CODES INPUT TYPE CODE RANGE (ºC) RANGE (ºF) B010~ 1800 0 ~ 3300 R020~ 1700 0 ~ 3100 S030~ 1700 0 ~ 3100 K04 -199.9 ~ 800.0 -300 ~ 1500 K050~ 1200 0 ~ 2200 E060~ 700 0 ~ 1300 THERMOCOUPLE J07 0~ 600 0 ~ 1100 T08 -199.9 ~ 300.0 -300 ~ 600 N090~ 1300 0 ~ 2300 ∗1U 10 -199.9 ~ 300.0 -300 ~ 600 ∗1L 11 0 ~ 600 0 ~ 1100 ∗2 WRe5-26 12 0 ~ 2300 0 4200 Pt100Ω 31 -200 ~ 600 -300 ~ 1100 R.T.D. Pt100Ω 32 -100.0 ~ 100.0 -150.0 ~ 200.0 0~10mV 71 Initial value: 0.0~100.0 Thermocouple B, R, S, K, E, J, T, 0~ 5V 81 Scaling setting range: N: JIS/ANSI/IEC VOLTAGE 1~ 5V 82 -1999~9999 ∗1 Thermocouple U, L: DIN 43710 Span: 10~5000 counts ∗2 Thermocouple WRe5-26: Made 0~10V 83 of Hoskins CURRENT 4~20mA 95 Series KR16 ORDERING INFORMATION ITEM CODE SPECIFICATIONS 1 SERIES KR16- Push button six-point selector 0Without 2REMARKS 9With (Please consult before ordering) Series SD16 & KR16 EXTERNAL DIMENSIONS & TERMINAL ARRANGEMENT • SD16 External Dimensions Terminal Arrangement AL1 AL2 Communication Analog output 111 RS-232C SG SD RD 11 100 96 RS-485 SG +- + - AL1 11 12 13 14 15 16 17 18 19 20 AL2 mA (250Ω register SET attached externally) COM + V - R.T.D. ENT R.T.D. SD16 AB B +- mV 100-240V AC +- L 50/60Hz N T.C. Panel Cutout 12345 6789 10 +0.8 92 0 (Unit : mm) 110min. (Unit : mm) • KR16 External Dimensions Terminal Arrangement 118 OUTPUT 18 100 96 6 + - + - 12 3 4 5 6 11 12 13 14 15 16 17 18 19 20 123456789 10 KR16 + - + - + - + - + - 1 2 3 4 5 INPUT Panel Cutout Panel Cutout 110min. +0.8 92 0 In case installed with SD16 +0.8 92 0 (Unit : mm) (Unit : mm) Warning • The SD16 & KR16 series is designed for the control of temperature, humidity and other physical values of general industrial equipment. (It is not to be used for any purpose which regulates the prevention of serious effects on human life or safety.) Caution • If the possibility of loss or damage to your system or property as a result of failure of any part of the process exists, proper safety measures must be made before the instrument is put into use so as to prevent the occurrence of trouble. ISO 9001 (The contents of this brochure are subject to change without notice.) Temperature and Humidity Control Specialists Head Office: 2-30-10 Kitamachi, Nerima-Ku, Tokyo 179-0081 Japan Phone: +81-3-3931-7891 Fax: +81-3-3931-3089 E-MAIL: exp-dept@shimaden.co.jp URL: http://www.shimaden.co.jp 00ESD16 & KR16 1030 +0.6 +0.6 45 0 45 0 48 48 60min. 44.6X91.6 44.6X91.6 +1 93 0