GP2Y0D340K Compact Distance Measuring GP2Y0D340K Sensors Features Outline Dimensions (Unit : mm) 1. Less influence on the color of reflective objects, reflectivity Burr 15 2. Line-up of distance judgement type (2.965) Detecting distance:10 to 60cm (10) 3.1 Light Judgement distance:40cm emitting direction (Adjustable within the range of 10 to 60cm [Optionally available]) φ4 φ4 3. External control circuit is unnecessary (2.8) 3.7 Light detector side Applications 0.25 Light emitter side (4.9) 1. LCD monitor Light emitting direction 2. Sanitary equipment 3. Personal computers 4. Game machine Terminal 1 V CC 2 Absolute Maximum Ratings LED_FB (T =25˚C, V =5V) a CC 3 V O 6 1 2 3 4 5 6 Parameter Symbol Rating Unit 4 GND 2-0.3 4-P2.5 (2-0.3) 5 Reg Supply voltage V −0.3 to +7V CC 5-0.5 6 Shield Output terminal voltage V −0.3 to V +0.3 V 14.7 O CC (Terminal root) Operating temperature T −10 to +60 ˚C opr Storage temperature T −20 to +70 ˚C stg 6 6 GP2Y0D340K 1 2 3 4 5 Recommended Operating Conditions Parameter Symbol Rating Unit RC Operating supply voltage V 4.5 to +5.5 V CC C=(1μF) R=1Ω ❈The dimensions marked are described the dimensions of lens center position ❈Unspecified tolerance:±0.3mm ❈Lens position is not fixed for adjustment detection distance Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet Internet address for Electronic Components Group http://sharp-world.com/ecg/ MAX. (3° ) 8.7 (3.68) (4.22) 2-1.6 8.24 MAX. 9.6 (0.3 ) 2 (8.4) 2.5 (Terminal root) GP2Y0D340K Electro-optical Characteristics (T =25˚C, V =5V) a CC Parameter Symbol Conditions MIN. TYP. MAX. Unit *1 *3 Distance measuring range ΔL 10 − 60 cm *1 V Output voltage at High V −0.3 − − V OH CC Output terminal voltage *1 V − − 0.6 V OL Output voltage at Low *1 *4 *2 Distance characteristics of output V 35 40 45 cm O Average dissipation current I at R =1Ω − 28 35 mA CC 1 Note) L : Distance to reflective object *1 Using reflective object : White paper (Made by Kodak Co. Ltd. gray cards R-27 ⋅ white face, reflective ratio;90%) *2 We ship the device after the following adjustment : Output switching distance L=40cm±5cm must be measured by the sensor *3 Distance measuring range of the optical sensor system *4 Output switching has a hysteresis width. The distance specified by Vo should be the one with which the output L switches to the output H Fig.1 Internal Block Diagram GND V CC REG C 1 PSD Signal Voltage processing regulator circuit Oscillation circuit V LED drive Output O circuit circuit R LED 1 LED_FB Distance measuring IC C =(1μF) 1 R =1Ω (LED current TYP. 300mA) 1 Fig.2 Timing Chart V CC (Power supply) TYP. 3.2ms TYP. 6.4ms TYP. 6.4ms Distance nth measuring First measurment Second measurment measurment operation Stand by period V (Output) Unstable output First output Second output nth output O GP2Y0D340K Fig.3 Distance Characteristics HL Output H Hystersis width L H Output L 05 10 15 20 25 30 35 40 45 50 55 60 Output switching point distance L=40±5cm Distance to reflective object L (cm) Output (V) NOTICE � The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. � Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. � Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii) Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). � If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export such SHARP devices. � This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. � Contact and consult with a SHARP representative if there are any questions about the contents of this publication.